Embedded solutions laipac technology, inc. 55 west beaver creek rd. Unit 1 richmond hill ontario l4b 1k5 canada tel: (905) 762-1228 fax: (905) 763-1737 http://www.Laipac.Com g30x-l gps data logger receiver.
1 laipac technology, inc. Contents 1. Introduction ................................................................................................3 1.1 specification ......................................................................................4 2. Installation ................................
2 laipac technology, inc. 1. Intr oduction the g30-l compact gps receiver ( data logger ) is about the half size of a computer mouse. Based on the sirf star ii tm chip set manufactured by sirf technology, inc., g30-l supports all features, and maintains the technical specifications of the sirf star ...
3 laipac technology, inc. 1.1 specification g30 compact gps receiver specifications general g30r /g30r-l g30u /g30u-l gps receiver 12 channel “all-in-view” tracking 12 channel “all-in-view” tracking cable connections terminated db-9 serial connector and cigarette lighter plug, 12 ft. Cable. Terminat...
4 laipac technology, inc. 2. Installation 2.1 connecting g30 (for g30r/g30r-l, ps/2 type ) step1. Plug rs-232 to com port of your notebook pc or handheld pc. Step2. Plug ps2 connector in the ps2 mouse outlet of your laptop pc or handheld pc. Place your pc in a safe and plane surface inside the vehic...
5 laipac technology, inc. Par ity : none stop bit : 1 flow contr ol : none. (4) the format of nmea messages is illustrated on software data section. (5) to prevent from the poor contact, the 4-pin mini din connector was designed as good fitting. It is strongly recommended that users don’t plug & unp...
6 laipac technology, inc. Com port is for the setup of sirf demo program(sirfdemo.Exe) and some mapping software which supports gps function. For instance, if it shows com3, you have to switch to the com port when you start sirf demo program. Please notice the action, it is very important. If you do...
7 laipac technology, inc. 3 using data logger demo pr ogr am gps data logger demo program is a win98/win2000 based application software to demo and test functions of g10/g30. This demo software will, according to the configuration, start recording upon power on and stop recording on running out of s...
8 laipac technology, inc. 3.1 getting connected first, connect g30-l to the usb/rs232 slot of your pc. Launch demo program and use “select comport” button (first speed button) to select the correct com port connected. When com port is correct selected, then press “connect” speed button to connect g3...
9 laipac technology, inc. 3.2 uploading data use “data sync” speed button to upload record. Users need to specify a file to save the uploaded data. A blue bar will display to indicate the upload progressing. Use “erase” speed button to clear logged data. After uploading the recorded data, users need...
10 laipac technology, inc. 3.3 data review use “analysis”speed button to read back and display recorded data. (see fig 4) some summary data is shown in the message area. The diameter of the yellow circle is 20 meters. The diameter of the green circle is 100 meters fig 4 record data.
11 laipac technology, inc. Use “load map” button to load a map file (in bmp format) as a back map. (see fig 5) the loaded map file will automatically fit into the current display range. Fig 5 background map loaded.
12 laipac technology, inc. Users can use “adj. Map” button to set the correct map range in wgs84 (see fig 6) use “clear map”button to remove the background map. Use “zoom in” “zoom out” buttons to change view range. Fig 6 adjust the map range 4 tr oubleshooting problem reason solution test fail (no ...
