Lakeair LA-Table H(120v) Operating And Service Manual
Table Media or Hepa air cleaner
Operating and Service Manual
LA-Table M (120v)
LA-Table M (230v)
LA-Table H (120v)
LA-Table H (230v)
VI. LAKEAIR MEDIA OR HEPA
AIR CLEANER
1 YEAR LIMITED WARRANTY
The complete LakeAir Media or Hepa Air
Cleaner is warranted by Air Aware Inc. to the
original purchaser to be free from defects in
material and workmanship under normal use
and service for a period of one year from the
date of purchase. Air Aware’s liability is to
be limited to repairing or replacing such
products during the warranty period at its
option, providing the product is sent prepaid
to Air Aware Inc. or an Authorized Service
Center and is deemed to the satisfaction of
Air Aware Inc. to be defective in any part or
portion.
This warranty is in lieu of any other warranty
expressed or implied and of all other
obligations or liabilities in connection with
the sale of the described LakeAir Media or
Hepa Air Cleaner. In no case will any claim
for consequential damages or labor expenses
be allowed. This warranty does not apply to
a LakeAir Media or Hepa or any part thereof
which has not been operated in accordance
with the operating instructions herein
contained; where components or other
accessories not compatible with the LakeAir
Media or Hepa Air Cleaner have been used
or attached to it; which has been subject to
accident, unauthorized alteration, abuse,
damage by flood, fire or acts of nature.
User’s Responsibility
Please Note:
Your warranty is subject to user
responsibility. Some items and some
conditions resulting from causes other than
manufacturing defects are the responsibility
of the user of the LakeAir Media or Hepa Air
Cleaner and are not covered by the warranty.
These are:
1. To operate and maintain according to
instructions.
2. Periodic checking and cleaning of unit.
Failure to clean or replace filter when needed
will void warranty.
3. Proper use of controls must be maintained
or warranty will be voided.
4. Damage to unit from unsatisfactory
operation because of blowing fuses,
inadequate electrical service or operation on
power supply other than that indicated on the
rating plate, or incorrect electrical protection
devices used.
5. Damage occurring during transportation
or resulting from improper handling.
6. Damage due to accident or resulting from
alteration or tampering.
7. Misapplication of product.