Lakeshore XC441 User manual
2
plug does not fit into your outlet,
consult an electrician for replace-
ment of the obsolete outlet.
10. Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with
the cart, stand,
tripod, bracket,
or table speci-
fied by the
manufacturer,
or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during
lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have fall-
en into the apparatus, the appa-
ratus has been exposed to rain
or moisture, does not operate
normally, or has been dropped.
15. The apparatus shall not be
exposed to dripping or splash-
ing and that no objects filled
with liquids, such as vases, shall
be placed on the apparatus.
16. Do not overload wall outlets or
extension cords as this can result
in a risk of fire or electric shock.
17. Always store the laminating
machine in a cool, dry place.
18. Use the laminating machine
only for its intended purposes.
19. Do not insert anything into the
opening other than pouches
and documents.
20. Place the laminating machine
on a secure, stable work area to
prevent it from falling and possi-
bly causing personal injury
and/or damage to itself.
21. Follow all warnings and instruc-
tions marked on the laminating
machine.
22. Use an easily accessible electri-
cal outlet near the laminating
machine.
23. The laminating machine must
be connected to a supply voltage
corresponding to the electrical
rating.
24. Unplug the machine before
moving it or when it is not in use
for an extended period of time.
25. Do not operate if the electrical
cord or plug is damaged or mal-
functioning.
26. The unit is intended for indoor
use only.
27. Close supervision is required
when this machine is used near
children.
Classroom
Laminating
Machine
With your new laminating machine, you can preserve and protect class-
room materials such as artwork, photographs, charts, and more. You can
even make your own write & wipe activities! The low-profile machine is
quiet and efficient. It accepts pouches up to 13" (330 mm) wide and pro-
duces durable, permanently sealed results.
Detailed operating instructions and safety warnings can be found inside
this guide. Be sure to read the entire guide carefully before you use your
laminating machine.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with a dry cloth.
7. Do not block any ventilation
openings. Install in accordance
with the manufacturer’s instruc-
tions.
8. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other appa-
ratus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-
type plug. A polarized plug has
two blades with one wider than
the other. A grounding type plug
has two blades and a third
grounding prong. The wide blade
or the third prong are provided
for your safety. If the provided
© 2006 Lakeshore
XC441
(800) 428-4414
www.lakeshorelearning.com
Printed in China
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead
within a triangle is intended to tell the
user that parts inside the product are a
risk of electric shock to persons.
The exclamation point within a triangle
is intended to tell the user that impor-
tant operating and servicing instructions
are in the papers with the product.