LAMAX BEAT Pax X-1 Quick Start Manual - Pairing
Pairing
Make sure the earphones are turned on so that they can be
paired with your device (phone, computer or music player).
When the green LED flashes rapidly, enable Bluetooth on
your device and search for new Bluetooth devices. Select
“X-1 by LAMAX Beat“ from the list of found devices. If requi-
red, enter the password “0000“ into your device.
Operation / Playback
To turn on the earphones, press and hold the centre button
on the controller for 4 seconds. After they have turned on,
you will hear a tone and the green LED will light up. To turn
off the earphones, press and hold the centre button on the
controller for 4 seconds. You will also hear a tone when the
earphones turn off. Press and hold to skip to the next
track, or press repeatedly to increase the volume. Press and
hold to go to the previous track, or press repeatedly to
decrease the volume. Signal tones when reaching the maxi-
mum or minimum volume, and also when changing tracks.
Mobile phone call controls
To answer or end a call, press the middle button on the con-
troller. Hold for 2 seconds to reject an incoming call. Press
the button twice to redial the last number.
Charging
To charge the earphones, plug one end of the cable
into the micro USB port on the underside of the cont-
roller and the other end of the cable into a USB power