Summary of Rose-63CL
Page 1
2014.05 rev.1 instruction manual.
Page 2: Table of Contents
1 table of contents preface thank you for purchasing our 【 】 . This instruction manual (document) includes details for safe use of this product. Please read this document thoroughly before using the product. Also, carefully store this document for immediate use whenever necessary. ■ preface p 1 ┗ ta...
Page 3: Meaning of Symbols
2 meaning of symbols precautions before use this document uses symbols to explain the degree of harm and damage caused by incorrect use of the product and to prevent harm on customers and others or damage on properties. Warning if this symbol is neglected and the product is handled incorrectly, seri...
Page 4: Precautions For Handling
3 precautions for handling warning power cable included in the product must be used. Do not use power supply not indicated on the product. Do not place heavy objects on power cable, place cables nearby heating devices, or complex wiring. Do not process power cable or use damaged power cable. Accurat...
Page 5: Place For Installation
4 more than 1000mm more than 500mm more than 500mm more than 500mm place for installation this device shall be installed in the following places. ● horizontal and stable place use as slanted or in unstable state may result in adverse effects such as paper return. Also, unexpected accidents can occur...
Page 6: Characteristics
5 instruction manual （this document） hex wrench foot switch stand（assembly type） assembly type film shaft １prevents set rose-63cl main body characteristics ● large diameter roller ● speed of laminate processing can be adjusted steplessly ● shaft with scale which easily adjust center of processing ma...
Page 7: Stand Assembly Method
6 attach to the left side of the body. Attach to the right side of the body. Attach the underfilm shaft unit in the front part of the machine. Each shaft holder has different shape. Attach them to the machine correctly, and attach the shaft correctly.Scale of the shaft is in the front part. Underfil...
Page 8: Operation Panel
7 ※if displayed password requirement, press the set button. This mode is used for maintenance. ①cold led led is lit up during cold laminating ②heater led led is lit up during heater is on ③prepare led led is lit up when heater temperature reaches set temperature ④lcd display panel （displayed when he...
Page 9: About Laminate Film
8 about laminate film before processing laminating there are two types of laminate film including 「 roll type 」 and 「 pouch type 」 . This product uses 「 cold roll film 」 type. ※ 「 pouch type 」 and 「 hot roll film 」 cannot be used. Thickness ( μ ) thickness of the laminate film is selected according ...
Page 10
9 paper core of release paper laminate film install the laminate film same as underfilm, and adjust center of it by referring to the scale of shaft. 【２】install the laminate film and paper core of release paper insert the underfilm to the underfilm shaft and set the shaft to the machine. 【１】install t...
Page 11
10 ①turn on the power switch in the back of the machine. ②turn the handle to the left side and pull down the laminate roller. ③insert the test scripts toward the laminate roller for test laminating processing. Adjust the wanted speed using speed control dial. If wrinkles are formed in the processing...
Page 12: Maintenance
11 maintenance this product is composed of many rollers, and they must be cleaned according to usage. The laminate can be maintained in desirable state by cleaning the rollers. Clean each roller since rollers have paper scraps and dusts attached. Cleanly wipe the paper tube holder using soft and dry...
Page 13: Troubleshooting
12 troubleshooting the following measures are taken for troubleshooting. Insert outlet plug and check power switch this product is used at ac 240v . Make sure that the outlet plug is correctly connected. Check that the power switch on the back of the main body is turned on. If power cable is disconn...
Page 14: Product Specification
13 ※ details in this document can be changed without notice to make improvements on the product. Max.Laminating width max.Substrate thickness paper tube size max.Laminating speed heating system processing temperature roller clearance power requirement/consumption size（w×d×h） weight 1520 mm 23 mm 3 i...