Sealing strip.
11.
Remove hob and apply adhesive seal inside and up to the marked line * note please cut hole accurately applying sealing strip place the hob into the aperture mark the perimeter of the hob with a pencil _15.
1 _ user manual lam1005 elbow installation the pipework shall be À tted in such a way that it cannot come into contact with a moveable part of the housing unit (e.G a drawer) and does not pass through any space where it may become crushed or kinked or damaged in any way. To prevent any potential dam...
_ 17 table on p.20. For some models a conic link is furnished e r e h w s e ir t n u o c e h t n i n o it a ll a ts n i e h t r o f this type of this link is obligatory: in the image below it is pointed out how to recognise the different links (cy= cylindrical, co= conic). In every case the cylindri...
18_.
Registered gas safe installer who will comply with all relevant gas, iec and local regulations. _ 19 your hob is.
20_ general gas power 7kw g 20/20 mbar (methane) 666 i / h g 30/28-30 mbar (lpg) 509 g/h installation class 3 voltage/ frequency v / hz 220-240 v / 50hz electrical input power 15w electric ignition yes product dimension 585 x 510mm electrical flex size / type 0.75mm 2 3 core h05v2v2 gas type g20 gas...
_ 21.
22_.
5hyb& issue v5 140317.
