Summary of LAM1006
Page 1
Gas hob lam1006 lam1007 user guide www.Howdens.Com/appliance-registration.
Page 2
See back page for product serial number.
Page 3
_ 03 user manual lam1006 / lam1007 dear customer, congratulations on your choice of hob. The user manual will help you use your product quickly and safely. • please read this user manual before installing and using the hob. • always follow the safety instructions. • keep this user manual within easy...
Page 4
04_ lamona appliances index index 01 - before using the hob 02 - safety general fire safety advice if a pan catches fi re deep fat frying safety working with gas what to do if you smell gas 03 - using the hob hob layout controls burner caps 04 - cleaning and maintenance how to clean your hob 05 - in...
Page 5
_ 05 user manual lam1006 / lam1007 before using the hob • make sure that you have removed all packaging, wrappings, stickers and fi lms from the hob surface. • it is recommended that you clean and wash the hob surface before using for the fi rst time (see p10). 01 - before using the hob general 02 -...
Page 6
06_ lamona appliances safety warning : accessible parts may become hot during use. To avoid burns, children less than 8 years of age should be kept away unless continuously supervised.This appliance can be used by children aged 8 years and above, persons with reduced physical, sensory or mental capa...
Page 7
_ 07 user manual lam1006 / lam1007 • do not move it as it’s likely to be extremely hot. • turn off the heat if it’s safe to do so, but never lean over a pan to reach the controls. • use fire blanket or a damp tea-towel to cover the pan. • if you have put the fire out, leave the pan to cool com- plet...
Page 8
_ 08 user manual lam1006 / lam1007 what to do if you smell gas • any works on gas equip- ment and systems may only be carried out by authorised qualified persons who are gas safe registered. • prior to the installation, ensure that local distribution conditions (nature of gas and gas pressure) and t...
Page 9
09_ lamona appliances 03 - using the hob hob layout controls 1. Spark plug 2. Burner plate 3. Pan support 4. Semi-rapid burner 5. Gas burner knob 6. Auxilary burner 7. Rapid burner 8. Base cover 1 1 1 1 3 2 5 4 4 6 7 8 maximum position ingnite the burners warning! Be careful when you use open fl ame...
Page 10
_ 10 user manual lam1006 / lam1007 if the burner accidentally goes out, turn the control knob to the off position and try to light the burner again after minimum 1 minute. The spark generator can start automatically when you switch on the mains, after installation or a power cut. It is normal. Turni...
Page 11
11_ lamona appliances 1. Burner cap 2. Burner crown 3. Ignition candle 4. Thermocouple 3 4 2 1 incorrect burner cap not central incorrect angled correct parallel burner cap burner head burner caps caution: any cleaning agent used incorrectly may damage the hob. Always let the hob cool before cleanin...
Page 12
_ 12 user manual lam1006 / lam1007 04 - cleaning & maintenance how to clean your hob • switch plates off and let cool. If necessary, treat plates with a cleaning agent (cleaner/ conditioner available in selected stores). • dry by switching on for a few minutes. • the hob can be cleaned using a clean...
Page 13
13_ lamona appliances protecting the hob cut-out the types of chipboard used for work surfaces swell relatively quickly in contact with humidity. Apply a special varnish or adhesive to the cut edges to seal and protect it from moisture ingress. Positioning the hob is designed to be built into a work...
Page 14
_ 14 user manual lam1006 / lam1007 ** minimum distance between cabinets must be equal to overall width of all hobs * minimum height to extractor as recommended in extractor instruction manual no shelf or overhang of combustible material should be closer than 650mm directly above the hob. There must ...
Page 15
15_ lamona appliances installation installation above an oven if the appliance is installed with an oven underneath, please leave at least 15mm of ventilation, unless otherwise stated in your oven installation guidelines. Installation in the worktop 30mm hob worktop screw 40mm hob worktop screw 20mm...
Page 16
_ 16 user manual lam1006 / lam1007 elbow installation the pipework shall be fi tted in such a way that it cannot come into contact with a moveable part of the housing unit (e.G a drawer) and does not pass through any space where it may become crushed or kinked or damaged in any way. To prevent any p...
Page 17
17_ lamona appliances gas connection , l e n n o s r e p d e if il a u q r o f e r a s n o it c u rt s n i e s e h t installation of equipment must be in line with relevant national standard. (for u.K only: by law the gas installation\commissing must be carried out by a “gas safe” installer). All wo...
Page 18
_ 18 user manual lam1006 / lam1007 regulating the minimum fl ame after lighting the burners, turn the control knob to the minimum setting then remove the knob (this can easily be removed by applying gentle pressure). Using a small «terminal» type screwdriver the regulating screw can be adjusted as i...
Page 19
19_ lamona appliances electrical connections important: ensure that the electricity supply is switched off before connecting. Your hob is intended for permanent installation. Your appliance must be connected to fi xed wiring via the use of a double pole switched fused spur outlet with at least 3mm c...
Page 20
_ 20 user manual lam1006 / lam1007 general gas power 7.9kw g 20/20 mbar (natural gas) 752 lt/h g 30/28-30 mbar (lpg) 574 g/h installation class 1 voltage/ frequency v / hz 220-240 v / 50hz electrical input power 1w electric ignition yes product dimension 580 x 510mm electrical flex size / type 0.75m...
Page 21
21_ lamona appliances if there is a fault, fi rst try and fi nd a solution to the problem yourself. If you cannot fi nd a solution to the problem yourself, speak to your local depot. If you operated the appliance incorrectly, or the installation was not carried out by a registered engineer, the visi...
Page 22
06 - your guarantee product guarantee details (uk only) your appliance has the bene fi t of a comprehensive manufacturer’s guarantee which covers the cost of breakdown repairs. (details of which are shown on your proof of purchase document). • any claim during the period of the guarantee (must be ac...
Page 24
185.9291.01/r.Aa/25.01.2017 product serial number (place sticker here) issue v6 140317.