Lamona LAM1741 User's Installation Manual - page 12
12_
LAMONA Appliances
05 - Trouble shooting
If you encounter a problem, it is often something minor, please read some of the suggested tips below.
The hob is not working
Check the fuse/circuit breakers to see if you are experiencing a power
failure
The hob has turned itself off
Check that the main on/off switch has not been touched or covered
accidentally, remove any objects on the hob and try turning it back
on again.
Repairs
Repairs are to be carried out by trained service technicians.
Display F and letters
If “F” and letters appear on the display, your unit has detected a
fault, the following table lists actions you should take to correct the
problems
Error codes
Hob Status
Codes
Fault Description
Action
H
Residual Heat
“ H” will switch off when
glass surface drops below 60oC
Hob Status
Codes
Fault Description
Action
F0
Touch Control Error
Switch the power off and on, The system will reset and the hob should
now be working correctly
FA
Touch Control Error
Switch the power off and on,The system will reset and the hob should
now be working correctly
FU
Touch Control Error
Switch the power off and on, The system will reset and the hob should
now be working correctly
FJ
Touch Control Error
Switch the power off and on, The system will reset and the hob should
now be working correctly
FC
Touch Control Error
Switch the power off and on, The system will reset and the hob should
now be working correctly
Fr
Touch Control Error
Switch the power off and on, The system will reset and the hob should
now be working correctly
Fc or F
Overheat / Temperature Problem
Allow hob to cool then Switch the power off and on, The system will
reset and the hob should now be working correctly
FE
Overheat / Temperature Problem
Allow hob to cool then Switch the power off and on, The system will
reset and the hob should now be working correctly
Ft
Overheat / Temperature Problem
Allow hob to cool then Switch the power off and on, The system will
reset and the hob should now be working correctly
FL
Poor Ambient Light Conditions
Switch off lighting in area, Clean hob surface, Switch the power off and
on, The system will reset and the hob should now be working correctly
If any of the above problems persist please contact the customer service line for further assistance,
Trouble shooting