Lamona LAM1742 User's Installation Manual

Summary of LAM1742

  • Page 1

    User & installation guide lam1742 ceramic domino touch control hob.

  • Page 2

    02_ lamona appliances dear customer, congratulations on your choice of hob which has been designed to give you excellent service. The user manual will help you use your product quickly and safely. • please read this user manual before installing and using the hob. • always follow the safety instruct...

  • Page 3

    _ 03 user manual lam1742 index index 01 - before using the hob 04 02 - safety 04 general 04 fire safety advice 05 if a pan catches fire 05 deep fat frying 05 if you have an electrical fire 05 03 - using your hob 06 pans 06 controls 06 heat settings 06 hob layout 08 04 - cleaning and maintenance 09 c...

  • Page 4

    04_ lamona appliances before using the hob • make sure that you have removed all packaging, wrappings, stickers and films from the hob surface. • it is recommended that you clean and wash the hob surface before using for the first time. • apply a thin coat of ceramic hob cleaner to the hob to help m...

  • Page 5

    _ 05 user manual lam1742 • never use the hob surface as a chopping board or food preparation area, as this may lead to it becoming damaged. • never put metal cooking utensils, cutlery, knives or other metal objects on the hob. They could become hot if they are near a cooking area which is in use. • ...

  • Page 6

    06_ lamona appliances do not use the ceramic hob if the glass surface is cracked, as electrical parts are directly beneath. Switch off the appliance at the supply to prevent electric shock and contact your supplier. The hob surface remains hot after use. Do not touch. The appliance is not intended t...

  • Page 7

    _ 07 user manual lam1742 if the hob is turned off with the lock function still active, the setting remains memorised and the display shows the symbol upon the subsequent re-use. Deactivate the key function to modify the hob settings. Heat up (rapid heating): the “heat up” function can be used to set...

  • Page 8

    08_ lamona appliances hob layout a. B. Using the hob a. Rear zone (180mm 1800w) suitable for 7” or 18cm diameter saucepan b. Front zone (145mm 1200w) suitable for 6” or 15cm diameter saucepan.

  • Page 9

    _ 09 user manual lam1742 04 - cleaning & maintenance ceramic glass hobs • the ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper. Do not use a used dishcloth or sponge as they can leave a film of detergent on the surface which can lead to discolouration. Please ensure that the...

  • Page 10

    10_ lamona appliances installation clearances and dimensions requirements 270mm 50mm in 150mm min between hob and rear wall (158mm min to cut out aperture) 400mm min 490mm minimum distance between carcasses must be equal to overall width of all hobs * minimum height to extractor as recommend in extr...

  • Page 11

    _ 11 user manual lam1742 30mm hob worktop screw 40mm hob worktop screw worktop 25mm oven or partition hob 5mm place the hob in the aperture, checking the hob glass is covering the worktop along all four sides. Set the front edge of the appliance parallel with the front of the worktop. Secure the hob...

  • Page 12

    12_ lamona appliances installation technical data outer dimentions width 290mm depth 510mm height 45mm cutout dimentions width 270mm depth 490mm cook zones hob wattage-front Ø145-1200w hob wattage-rear Ø180-1800w total electric power 3000w supply voltage 230v~50hz fuse protection 13 a min cable type...

  • Page 13

    _ 13 user manual lam1742 06 - your guarantee product guarantee details (uk only) your appliance has the benefit of a comprehensive manufacturer’s guarantee which covers the cost of breakdown repairs. (details of which are shown on your proof of purchase document). • any claim during the period of th...

  • Page 14

    14_ lamona appliances notes.

  • Page 15

    _ 15 user manual lam1742 notes.

  • Page 16

    If supplied, please stick your self adhesive product rating plate here, or make a note of the product serial number below in the box below for future reference. Serial number : ........................................................................................... Issue draft 1.