Lamona LAM2403 User's Installation Manual - page 11
Exclusive to Howdens Joinery.co
Page _ 11
User manual LAM2403
Decorative
Chimney
Fitting
•
Connect the extractor to the electricity supply (see electrical connections page). We recommend an
isolation switch that is accessible after installation.
•
The vent adaptor ‘4’ and outlet reducer ‘5’ maybe required depending on your chosen ducting method.
•
Fit the Appropriate ducting kit if venting externally.
•
Rest the chimney sections on the main extractor body and secure in position with bracket ‘7’
•
Next,extendtheuppersectiontotheceilingandmark-upthepositionfortheupperfixingbracket‘6’.
•
lowertheuppersection,drillandfixtheupperfixingbracket‘6’intoposition.
•
Secure the upper chimney section to bracket ‘6’ using the screws ‘9’ provided.
•
Finallyre-fitthegreasefilters.
DO NOT: Operate the extractor without the grease filters in position.
75
130
150
244
400
Y
137
550
(**)
Please use rawl plugs and
screws appropriate to the type of
wall.
700 mm Minimum distance to worktop
750 mm Recommended distance to worktop
10.**
10.**
10.**
10.**
10.**
10.**
8.
8.
8.
8.
9.
9.
6.
7.
8.
9.
9.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
2.
3.
4.
5.
1.
1.
3.
5.
4.
6.
2.
7.
Ducting kit
Supplied Separately
Vent through external
wall or ceiling
Filtered air
recirculated
1
2