Lamona LAM8800 Use & Installation Manual - Installation
- Any packaging that is removed from the machine should
be kept away from children.
DO NOT - use a two-way adaptor, or extension lead. The
dryer must be connected to its own socket.
DO NOT - block the air inlets at the front and back of your
dryer.
DO NOT - exceed the recommended maximum load.
DO NOT - place articles in the dryer if anything other than
a water solution has been used in the cleaning process.
DO NOT - dry unwashed items in the tumble dryer.
DO NOT - attempt to dry dripping wet articles.
DO NOT - use the tumble dryer if you suspect that it is
damaged in any way
WARNING: The appliance must not be supplied through
an external switching device, such as a timer, or connected
.
INSTALLATION
The tumble dryer is fully compatible with any 600mm deep kitchen units and complies with
stringent EEC regulations.
Your dryer is provided with a vent hose which will extend to approx 2.4m (8ft). We strongly recommend that
this is vented through the wall with the attachment provided. The position of the hole (100mm diameter) for
the vent directly behind the tumble dryer is shown in the diagram.
If the through the wall vent is to be positioned other than behind the dryer, the vent hose should be
h adjacent side panel to relevant position. The plinth must be cut-out to
accommodate the air vent grill at the bottom front of the tumble dryer.
postitioned