LaMotte duo-soft 1022 User Manual

Summary of duo-soft 1022

  • Page 1

    Duo-soft tm water softener code 1022 introduction the duosoft water softener is designed to produce high quality treated water. Each unit has a faucet adapter that easily connects to any standard faucet. The two chambers may be filled with the media of choice for specific problem water. Water passes...

  • Page 3: Addition

    Rocedure a - addition and removal of resin allow excess water to drain from outlet hose. 4. Clean threaded area completely and replace the black plug in the top of column. 5. To replace resin, remove black plug from the top of dispenser. 1. By adding more water to the 3. Column and shaking, the rema...

  • Page 4: 10.

    Procedure b - instructions for use adjust flow to maintain the 1" layer of water over resin. 7. Let effluent run to waste 6. For about 3 minutes to wash out residue from the previous sample. 3 minutes 3. Slowly turn on faucet and adjust the flow of water into softener until the stream of water is ab...

  • Page 5

    Procedure c - regeneration of resin in top chamber follow manufacturers’ insstructions for regeneration of media. Cation exchange resin may be regenerated in the following manner. Note: due to build up of air pressure, it is not possible to regenerate both chambers at the same time. Follow steps 1-8...

  • Page 6

    Procedure d - regeneration of resin in bottom chamber follow manufacturers’ instructions for regeneration of media. Cation exchange resin may be regenerated in the following manner. At this point the resin in the bottom chamber should be completely regenerated. 9. Clean threaded area completely and ...

  • Page 8: Lamotte Company

    Lamotte company helping people solve analytical challenges ® po box 329 • chestertown • maryland • 21620 • usa 800-344-3100 • 410-778-3100 (outside u.S.A.) • fax 410-778-6394 visit us on the web at www.Lamotte.Com 61022-07.05.