- DL manuals
- Lampert
- Welding System
- optiwelder T1
- Operating Instructions Manual
Lampert optiwelder T1 Operating Instructions Manual
Summary of optiwelder T1
Page 1
Operating instructions precision welding device “optiwelder t1” and puk - optic device lampert werktechnik gmbh 230v.
Page 2: Opti-Welder T1
1 opti-welder t1 operations manual dear customer, this manual is intended to assist you in operating and maintaining your „opti-welder t1“. It is in your best interest to read this manual thoroughly, and to follow the instructions conscientiously. You will avoid malfunctioning as a result of operati...
Page 3
2 table of contents section 1 – field of application 2 section 2 – introduction 2 section 3 – safety rules 3 3-1. General safety rules 3 3-2. Personal body protection and dangers 4 section 4 – installation 4 4-1. Set-up rules 4 4-2. Operations elements front side 4 4-3. Operations elements rear side...
Page 4
3 section 3 – safety rules 3-1.General safety rules • only a professional may open the device. Remove the power plug and make certain that the device is completely unplugged. . Discharge the components in the device, which store electricity. • if you have any doubts, please contact a professional. O...
Page 5
4 4-2. Description of the operating elements front side (illus. 1) charge light (1) glows orange during charging operation light (2) glows yellow when ready for welding weld power dial (3) 6 level adjustable welding power impulse length switch (4) connector jack for hand piece (5) jacks (6) for conn...
Page 6
5 illus. 3) 12 13 14 15 4-4. Starting up • set up the device on a level and stable as well as insulated surface, such as a workbench. • insert the hand piece connector as straight as possible into the jack (5) and carefully turn per hand towards the right to secure. • insert the connector of the cla...
Page 7
6 5-2. In general and pointers please note! Always work with sharpened electrodes! This is the best way to achieve maximum results. Make sure the work piece has enough contact to the clamp. If contact problems occur, make certain the clamp is in contact with a metallic blank location. Never weld „ha...
Page 8
7 section 6 – technical data 6-1. Technical data • device is suitable for spot and precision welding in dry environments • main voltage ~230 v / 50-60 hz +/-15% • mains fuse t 2,5 a • power input 500 va • operating voltage: 20 – 38 v • no l- load voltage 38 v • max. Charging time 3 sec • inert gas: ...
Page 9
8 section 7 – trouble shooting error cause solution 1. No welding power main power switch on, ready for operation lamp does not light up power connection interrupted check power connection and main voltage 2. No welding power power main switch on. Ready for operation lamp lights up (yellow) welding ...
Page 10
9 section 8 – replacement parts list 100 150 151 152 hand piece: 100 100 complete hand piece 100 150 valve 100 151 spread pliers 100 152 nut electrodes: 284315 electrodes 10 pcs. In display can (thorium dioxide - free) soldering tweezer: 284310 soldering tweezer with 900 mm cable clamp: 284317 elect...
Page 11
10
Page 12: Puk
Puk optic unit operations manual dear customer, this manual is intended to help you operate your puk – safety welding shield. It is in your best interest to read this manual thoroughly, and to follow the instructions conscientiously. You will avoid malfunction as a result of operating errors. The de...
Page 13
2 index intended use 2 introduction 2 general safety rules 2 personal body protection 3 start up and instructions 3 description of operating elements 3 care and maintenance 4 technical data 4 the intended use for the puk-welding shield: observation of welding procedures through the view window of th...
Page 14
Start up and instructions insert the welding shield into the lamp holder (3) install the illumination bulb (max. 9w) into the provided socket plug in the lamp’s connector plug (4) into the outlet (5) on the rear side of the welding device and fasten by carefully turning per hand towards the right. P...
Page 15
4 care and maintenance the welding shield needs under ordinary circumstances a minimum of care and maintenance. It is essential though, you pay attention to a few points to guarantee proper function and to ensure you will have this device ready for operation for years to come. Regularly check the po...