1. DL manuals
  2. Lampo
  3. Flood Light
  4. SHOP 150
  5. User Manual

Lampo SHOP 150 User Manual - Tech@lamposrl.It

Manual is about: CYM continuous colour changer wash luminaire

Summary of SHOP 150

  • Page 1

    Shop 150 & 250 cym continuous colour changer wash luminaire user’ s manual release 1.0 this manual must be considered an integral part of the projector..

  • Page 2: Tech@lamposrl.It

    1 before connecting and using the projector, it is important to read carefully all the instructions in this manual. Qualified personnel only, in compliance with all the security laws, can do the installation, the maintenance and the utilisation of this projector. Before connecting the projector, mak...

  • Page 3

    2 general description as shown in figure, the shop is made up of the following parts: 1. Rear panel 2. Auxiliary support 3. Cooling fan 4. Anchoring bracket 5. Projector body 6. Front panel 7. Barn doors kit (optional) 8. Fixing screws features and dimensions shop 250 shop 150 voltage rating 230 v 2...

  • Page 4

    3 description of parts and controls rear panel as shown below, the following elements can be seen on the rear panel: exemple shop 250 1. Power supply 2. 5a or 6,3a fuse 3. Lamp access 4. Lamp adjust 5. Dmx in 6. Dmx out 7. Dmx master 8. Auxiliary suspension system adjustment of projector body angle ...

  • Page 5

    4 handling the projector, with or without packing, must be handled with care. Lifting and handling must be carried out with special equipment. Do not expose the projector, with or without its packing, to brusque accelerated or decelerated movements, knocks, dragging, or other stress caused by unsuit...

  • Page 6

    5 connections power supply use the cable provided inside the special junction box. The power line must be protected by a differential magneto thermal circuit breaker, while metal parts that might be electrically charged through the projector must be grounded. Shop 150 absorbs 460w at 230 v while sho...

  • Page 7

    6 channel 1 = cyan percent values decimal values 0 % >>> open =0 >>> 100% cyan =255 channel 2 = yellow percent values decimal values 0 % >>> open =0 >>> 100% yellow =255 channel 3 = magenta percent values decimal values 0 % >>> open =0 >>> 100% magenta =255 channel 4 = special functions dmx decimal ...

  • Page 8

    7 stand-alone functions shop projectors can work in stand-alone both single and in banks, that means without the need of a control unit, in master/slave function, since any luminaries can be master of a bank, it becomes able to control synchronously all the other shop fixtures and to manage a menu f...

  • Page 9

    8 examples light colours fading (white-cyan-yellow-magenta) the total value in binary code is 1+2+8+32=43 (fading colours from colour 1 to colour 4) light and dark colours fading (white-cyan-yellow-magenta-deep green-deep blue-deep red) the total value is 2+8+32+128=170 (fading colours from colour 2...

  • Page 10

    9 m1 - lamp replacement the lamp must be replaced with the same type of lamp and according to the same frequency. A less efficient lamp jeopardizes projector performance. Replace the lamp as follows: - when the projector is cold, turn off the on/off switch to cut the electricity and follow the instr...

  • Page 11

    10 troubleshooting problem possible cause solution shop will not turn on no mains power no power to the projector burned-out fuse make sure the mains power is on and the circuit breaker hasn’t been triggered make sure the switch on the back of the projector is on. Make sure the top lid is tightly cl...

  • Page 12

    11 optional and beam angle barn doors kit the barn doors mounting kit is supplied if requested as a optional for shop 150 and 250. The mounting process is very easy: 1- unscrew the 4 ph screws from the front panel. 2- insert the 4 spacers you will find in the barn door kit and firmly tight. 3- posit...