Lanaform Mixy Manual - page 4
EN
• Do not add any substance other than distilled or demineralised water to the tank at a temperature below 40°C.
• Never switch on the humidifier if there is no water in the tank.
• Do not shake the appliance. This could cause water to overflow into the base unit and affect its operation.
• Never touch the water and the immersed components when the unit is in operation.
• To prevent any damage to the components, avoid splashing the inside of the base unit.
• Never scratch the transducer.
• In temperatures of below freezing (below 0°C), remove the water from the tank and the base to prevent the risk of
freezing.
• Do not use the humidifier if the air in the room is already humid enough (at least 50% relative humidity). Excess
humidity manifests itself by condensation on cold surfaces or cold walls in the room. To determine the correct humidity
level in the room, use a hygrometer - these are available in most material stores and in hypermarkets.
• The appliance should be used at a temperature of between 5°C and 40°C and a relative humidity of less than 50% RH.
COMPONANTS
(Fig. 1)
1. Base unit
2. Main switch (ON/OFF and Vapour Setting)
3. Warning light
4. Tank
5. Tank handle
6. Water level sensor
7. Transducer
8. Fan
9. Tank plug
10. Spray
11. Cover
12. Filter
13. Transformer
Fig. 1
13
11
10
4
6
3
2
5
9
8
12
7
1
INSTRUCTIONS FOR USE
Characteristics:
• Capacity 2 litres
• Continuous operation for more than 18 hours.
• Easy-fill water tank.
• Integrated safety mechanism which automatically stops the diffuser from working when the water tank is empty.
• High-quality transducer guarantees correct and long-lasting operation.
Functions:
• Increases and adjusts the relative humidity of the room.
• Eliminates electrostatic charges.
• Improves the quality of the air in the room.
4