Model: cbf054_037p vm innovations assembly instructions attention contact md sports customer service do not return to the store * for additional resources and frequently asked questions, please visit us at themdsports.Com.
Www.Themdsports.Com cbf054_037p 1 (continued on the next page.) notice! This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost...
Www.Themdsports.Com cbf054_037p 2 (continued on the next page.) phillips screwdriver - not included standard (flat head screwdriver) - not included wrench - included allen key - included caution! Electric screwdrivers may be helpful during assembly; however, please set a low torque and use extreme c...
Cbf054_037p parts list www.Themdsports.Com cbf054_037p 3 (continued on the next page.) x1 for fig. 1 1 hockey mainframe x1 for fig. 2 2 billiards playfield x2 for fig. 14 3 top rail x2 for fig. 5 4 end apron - a x2 for fig. 6 5 ball shelf x2 for fig. 6 6 end apron - b x2 for fig. 11 7 side leg panel...
Cbf054_037p parts list www.Themdsports.Com cbf054_037p 4 (continued on the next page.) cbf054_037p pre-installed parts x4 for fig. 1 33 corner pocket x2 for fig. 1 34 side pocket x4 for fig. 1 35 plastic strip x2 for fig. 13 36 hockey goal x8 for fig. 12 37 5x28mm zinc bolt x12 for fig. 11 38 5x28mm...
Www.Themdsports.Com cbf054_037p 5 (continued on the next page.) fig. 1 x 1 1 x 4 33 x 2 34 x 4 35 x 8 43 x 12 45 assembly instructions: 1. Find a clean, level place to begin the assembly of your product. 2. Remove all the parts from the box and verify that you have all of the listed parts as shown o...
Www.Themdsports.Com cbf054_037p 6 (continued on the next page.) fig. 2 x 1 2 x 18 44 fig. 3 x 2 13 x 4 14 x 12 41 2 44 1 44 2 1 14 14 14 13 fig. 3a 14 41 13 41 fig. 3b.
X 4 p2 www.Themdsports.Com cbf054_037p 7 (continued on the next page.) fig. 4 x 2 8 x 2 9 x 4 15 fig. 5 x 2 4 x 4 32 x 8 41 15 p2 9 & 8 pin 4 32 41 32 fig. 5a locking pin important: make sure that the pin from the locking pin is in the direction that is shown. Note: be sure that the holes are on the...
Www.Themdsports.Com cbf054_037p 8 (continued on the next page.) fig. 6 x 2 x 2 5 6 x 4 44 44 5 5 6 6 fig. 7 x 4 45 fig. 6 assembly 45 fig. 5 assembly.
Www.Themdsports.Com cbf054_037p 9 (continued on the next page.) fig. 8 fig. 9 46 46 9 8 fig. 7 assembly x 12 46 x 2 x 2 11 12 x 2 16 x 8 49 49 16 11 12.
Www.Themdsports.Com cbf054_037p 10 (continued on the next page.) fig. 10 x 4 x 8 44 49 fig. 9 assembly fig. 8 assembly 44 49 fig. 11 x 2 x 4 7 10 x 12 x 1 31 38 x 12 40 x 12 p3 10 7 10 40 38 fig. 11a p3 10
X 1 31 www.Themdsports.Com cbf054_037p 11 (continued on the next page.) fig. 12 x 8 x 8 37 39 x 8 p3 x 8 p5 fig. 10 assembly fig. 11 assembly p5 p3 39 37 fig. 12a.
Www.Themdsports.Com cbf054_037p 12 (continued on the next page.) fig. 13 x 2 x 4 36 52 x 1 30 top view of correct swivel bolt and washer placement 52 36 36 1 4 47 48 48 50 32 32 fig. 13b fig. 13a fig. 13c fig. 3 assembly fig. 12 assembly note: keep the locking pins (#32) open. Note: close the lockin...
Www.Themdsports.Com cbf054_037p 13 (continued on the next page.) fig. 14 fig. 15 x 2 x 2 3 17 x 2 19 x 8 42 4 42 3 3 19 17 17 note: make sure that the locking pins are closed to secure the mainframe. Note: peel off the felt from the felt pads (#17) and attach to the bottom of the pushers (#19). Fig....
Www.Themdsports.Com cbf054_037p 14 (continued on the next page.) fig. 16 x 1 x 2 27 28 28 27 note: make sure that the locking pins are closed to secure the mainframe. Fig. 17 32 note: open the locking pins. Note: to complete this step, the billiards side must be facing upwards. If not, disengage all...
Fig. 18 x 1 x 1 18 51 www.Themdsports.Com cbf054_037p 15 (the last page) you are now ready to play! Charger in off made in ohina on dc 6v usb power charger in off made in ohina on dc 6v charging in switch 18 51 note: to operate the hover puck (#18), just turn on the switch on the underside of hover ...
