Preinstallation checklist & precautions 1. Inspect your unit. Occasionally, products are damaged during shipment. If the unit is damaged , contact your dealer before using. 2. Carefully read the literature provided to familiarize yourself with specific details regarding installation and use. These m...
Installation installation installation installation the diagram shows the various connections which must be made for proper operation. 1. Location. The pump must be installed using a laundry tray/ tub/ sink to drain water into it. The pump must be installed in a level horizontal position, fully supp...
5. Electrical connections. It is strongly recommended that the pump is plugged into a properly grounded electrical receptacle protected by a ground fault circuit interrupter (gfci) and in accordance with the national electrical code and local codes. If the pump is to be controlled by an on and off s...
Troubleshooting chart pump will not turn a. Blown fuse/tripped breaker or other on. Interruption of power to the pump. Unit runs or hums b. Discharge is restricted. But does not pump. C. Check valve is stuck closed or installed backwards. D. Discharge head exceeds pump capacity. E. Pump impeller is ...
