Lance Lab TC 1 Standard Quick Start Manual

Quick Start Guide: TC 1 Standard

1 m Snake Camera

TM

Reference Description

1

Power Button / Camera Button

2

Video Record Button

3

Rewind Button (menu back)

4

Fast Forward Button (menu forward)

5

ESC Button

6

Ok/ Enter Button

7

Micro SD® Card Slot

8

Speaker (Not in use with TC 1)

9

Microphone (Not supplied with TC 1)

10

Video Feed Connector (AV/ in)

11

Charging Indicator

12

System Status Indicator

13

AV Output (AV/ out)

14

USB Port

15

Mode Switch (“Q” standby / “N” On)

Mini DVR Controls 

Top View

Front View

Side View

LCD Display

To turn on Mini DVR, ensure the mode switch (standby) is set 

to position “N”, the power button must be then be held for 10 

seconds until the blue light illuminates and the screen turns on. 

TC 1 Lance Assembly Guide

Lance Lab Ltd™ ∙ C2 Strangford Business Park ∙ Ards Business Centre

Jubilee Road ∙ Newtownards ∙ County Down ∙ BT23 4YH ∙ United Kingdom

(15.05.15)

TC 1 Mini DVR Setup Guide

To begin a recording simply press the               

record  button  on  the  Mini  DVR  when  the  live              

video feed can be seen. Press ESC to end 

the recording. To take a photograph simply 

press  the  power  button  once  (allow  5  seconds          

between photo’s).

Further guidance on using the Mini 

DVR system correctly is provided in the 

TC  1  operating  manual  and  online  at          

www.lancelab.com.

© 2014 Lance Lab Ltd

™

Please observe the safety information provided in the TC 1 operating 

manual to avoid injury, loss of life and damaged equipment.

DO NOT SUBMERGE THE CAMERA 

HEAD IN LIQUID / WATER.

ENSURE  YOUR  TC  1  IS  STORED        

APPROPRIATELY TO AVOID DAMAGE.