Lancom AirLancer PCI-54pro Quick Installation - 1.3
AirLancer USB-54pro – AirLancer USB-300 – AirLancer PCI-54pro
쮿
Chapter 1: Installation
4
EN
1.3
Installing the AirLancer USB-54pro and AirLancer
USB-300
햲
Plug the AirLancer USB-54pro or AirLancer USB-300 into a free USB
interface while your PC is running.
The USB cable supplied allows you to position the AirLancer USB-
54pro or AirLancer USB-300 further away from your PC so that you
can optimize the wireless signal.
햳
After detecting the hardware, Windows starts the driver installation
automatically. Interrupt this procedure if you wish to carry out the
installation with the Setup Wizard on the supplied CD.
햴
Place the supplied CD into your drive. The Setup Wizard will start
automatically.
If the setup does not start automatically, run AUTORUN.EXE in the
root directory of the supplied CD.
햵
With the Setup Wizard, you first select the entry "AirLancer software",
then the entry for your product. Follow the setup program's instructions.
1.4
Installing the AirLancer PCI-54pro
햲
Switch the PC off.
햳
Briefly touch the computer housing to discharge any static electricity.
Next, disconnect the AC power supply cable from the rear of the PC
housing.
햴
Remove all retaining screws or release the catches for the PC housing and
remove the cover.
햵
A free PCI slot is required for the installation of the AirLancer PCI-54pro.
Before installing the card, remove the blind bracket for the slot you intend
to use.