1. DL manuals
  2. Lancom
  3. Wireless Access Point
  4. OAP-310agn
  5. Manual

Lancom OAP-310agn Manual

Summary of OAP-310agn

  • Page 1

    110754/0909 lancom systems gmbh adenauerstr. 20/b2 52146 würselen germany e-mail: info@lancom.Eu internet www.Lancom.Eu lancom oap-54 wireless lancom oap-310agn wireless lancom o ap-54 wir eless – lancom o ap-310agn wir eless 쮿 handbuch 쮿 manual . . . C o n n e c t i n g y o u r b u s i n e s s 1107...

  • Page 2

    Lancom oap - 54 wireless lancom oap - 310agn wireless.

  • Page 3

    © 2009 lancom systems gmbh, wuerselen (germany). All rights reserved. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. Lancom systems shall be liable only to the degree specified in the terms of sale and delivery. T...

  • Page 4

    Lancom oap - 54 wireless and lancom oap - 310agn wireless preface 3 en preface thank you for placing your trust in this lancom systems product. The lancom oap wireless are designed to offer high-performance wireless lan in tough environments. The housing that conforms with ip66 and the facilities fo...

  • Page 5

    Lancom oap - 54 wireless and lancom oap - 310agn wireless preface 4 en security settings to maximize the security available from your product, we recommend that you undertake all of the security settings (e.G. Firewall, encryption, access protec- tion) that were not already activated when you purcha...

  • Page 6

    Lancom oap - 54 wireless and lancom oap - 310agn wireless preface 5 en further server services (dhcp, dns, charge management) the menu reference guide (also available at www.Lancom.Eu/download or on the cd supplied) describes all of the parameters in lcos, the operating system used by lancom product...

  • Page 7

    Lancom oap - 54 wireless and lancom oap - 310agn wireless content 6 en content 1 introduction 9 1.1 what is a wireless lan? 9 1.1.1 modes of operation of wireless lans and access points 10 1.2 wireless lans in accordance with 802.11n 10 1.2.1 advantages of 802.11n 10 1.2.2 compatibility with other s...

  • Page 8

    Lancom oap - 54 wireless and lancom oap - 310agn wireless content 7 en 4 security settings 47 4.1 security in the wireless lan 47 4.1.1 encrypted data transfer (802.11i/wpa or wep) 47 4.1.2 802.1x / eap 48 4.1.3 lancom enhanced passphrase security 48 4.1.4 access control by mac address 49 4.1.5 ipse...

  • Page 9

    Lancom oap - 54 wireless and lancom oap - 310agn wireless content 8 en 6 setting up internet access 80 6.1 the internet connection wizard 81 6.1.1 instructions for lanconfig 81 6.1.2 instructions for webconfig 81 6.2 the firewall wizard 82 6.2.1 lanconfig wizard 82 6.2.2 configuration under webconfi...

  • Page 10

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 9 en 1 introduction 1.1 what is a wireless lan? The following sections describe the functionality of wireless networks in general. You can see from the table 'what your lancom can do' further below which functions your...

  • Page 11

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 10 en 1.1.1 modes of operation of wireless lans and access points wireless lan technology and access points in wireless lans are used in the following modes of operation: simple, direct connection between terminal devi...

  • Page 12

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 11 en based on 802.11a/g enable physical data rates (gross data rates) of up to 54 mbps, which turn out to be approx. 22 mbps net. Networks based on 802.11n currently achieve a gross data throughput of up to 300 mbps (...

  • Page 13

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 12 en 1.2.3 the physical layer the physical layers describes how data must be transformed in order for them to be transmitted as individual bits over the physical medium. In this process the following steps are perform...

  • Page 14

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 13 en these two features increase the maximum useable bandwidth of 54 mbps for 802.11a/g to 65 mbps for 802.11n. This increase is not exactly spectacular, but it can be further improved by using the following features:...

  • Page 15

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 14 en by the surrounding surfaces causing a broadcast signal to reach the wlan cli- ent's antenna over many different paths; this is also referred to as "multipath propagation". Each of these paths has a different leng...

  • Page 16

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 15 en mimo thus allows the simultaneous transmission of several signals over one shared medium, such as the air. Individual transmitters and receivers must be positioned a minimum distance apart from one another, altho...

  • Page 17

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 16 en signals cannot be uniquely identified, their computation can still be performed with the aid of the third signal. The use of additional antennas does not con- tribute to an increase in data throughput, but it doe...

  • Page 18

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 17 en way that maintains compatibility to ieee 802.11a/g devices. 802.11n trans- mits data over two contiguous channels. One of these assumes the task of a control channel that, among other things, handles the administ...

  • Page 19

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 18 en transmitting data in shorter intervals thus increases the maximum data throughput when using improved ofdm modulation, two parallel data streams and transmission at 40 mhz to 300 mbps. 1.2.4 the mac layer frame a...

  • Page 20

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 19 en all data packets that are to be combined into a single large frame must be available at the sender at the time of aggregation—as a consequence some data packets may have to wait until enough data packets for the ...

  • Page 21

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 20 en 1.3 just what can your lancom wireless router do? The following table provides a comparison of the properties and functions of your device. Lancom oap-54 wireless lancom oap-310agn wireless applications outdoor o...

  • Page 22

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 21 en managed mode for central configuration of wlan mod- ules by a wlan controller ✔ ✔ turbo modus: bandbreitenverdopplung im 2,4 ghz- und 5 ghz-bereich ✔ super ag inkl. Hardware-compression und bursting ✔ multi ssid ...

  • Page 23

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 1: introduction 22 en quality of service (qos) ✔ ✔ vpn gateway with vpn hardware encryption (optional) ✔ power supply power-over-ethernet (poe) ✔ ✔ configuration and firmware configuration with lanconfig or with web browser, additiona...

  • Page 24

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 23 en 2 installation this chapter will assist you to quickly install hardware and software. First, check the package contents and system requirements. The device can be installed and configured quickly and easily if al...

  • Page 25

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 24 en operating system with tcp/ip support, suchas windows, linux, bsd unix, apple mac os, os/2. Access to the lan via the tcp/ip protocol. Wireless lan adapter or lan access (if the access point is to be connected to ...

  • Page 26

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 25 en lancom oap-54 wireless lancom oap-310agn wireless power this led indicates that the device is operational. After the device has been switched on, the led remains lit green. Lan status of the lan port wlan1 (lanco...

  • Page 27

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 26 en the following can be displayed for wlan link: wlan data (lancom oap-310agn wireless only) provides information about the data traffic at the internal wlan module. The following can be displayed for wlan data: wan...

  • Page 28

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 27 en message gives general information about the device. The power led flashes red when a charge limit is reached. 2.4 the device connectors the connections and switches of the lancom oap-54 wireless and lancom oap-31...

  • Page 29

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 28 en lancom oap-54 wireless power lan wlan -1 wlan -2 wan message lancom oap-54 wireless lancom oap-310agn wireless main connector for the first wlan module. Connector for antenna 1. Aux connector for the first wlan m...

  • Page 30

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 29 en power over ethernet – the elegant power supply via lan cabling electricity supply to the lancom oap wireless takes place via power over ethernet. This requires the use of the power injector as included in the sco...

  • Page 31

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 30 en reset button functions the reset button is freely accessible on lancom oap-54 wireless or lancom oap-310agn wireless, hence you cannot reset the device by simply pressing this button. Detach the lan cable from th...

  • Page 32

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 31 en wall mounting pole mounting place the two u-bolts around the pole and use the supplied nuts and washers to fix the mounting plate . The package includes two mounting clamps for poles of different diameters. Pole ...

  • Page 33

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 32 en connecting the lancom oap wireless installation of the lancom oap-54 wireless devices involves the following steps: earth connection (if necessary)—attach the earth cable to the earth screw of the lancom oap wire...

  • Page 34

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 33 en the employment of the airlancer extender sa-5l for internal light- ning protection is essential under all circumstances —the airlancer extender sa-5l is always mounted between the access point and the antenna, pr...

  • Page 35

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 34 en carries out a self-test as shown by the blinking message led. The leds subsequently display the operational status. 2.6 software installation the following section describes the installation of the windows-compat...

  • Page 36

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 2: installation 35 en 2.6.2 which software should i install? Lanconfig is the windows configuration program for all lancom rou- ters and lancom access points. Webconfig can be used alternatively or in addition via a web browser. With ...

  • Page 37

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 36 en 3 basic configuration the basic configuration is conducted with a convenient setup wizard that provides step-by-step guidance through the configuration and that requests any necessary information. Unconfig...

  • Page 38

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 37 en wireless lan details security settings 3.1.1 tcp/ip settings tcp/ip configuration can be performed in two different ways: either fully auto- matically or manually. No user input is required if tcp/ip confi...

  • Page 39

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 38 en for example '10.0.0.1' with a network mask of '255.255.255.0'). If you do this you simultaneously specify the address range that the dhcp server will subsequently use for the other devices in the network (...

  • Page 40

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 39 en in the managed mode the lancom wireless routers and lancom access points automatically receive the same root password as the wlan-controller, assuming that no root password has been set in the device itsel...

  • Page 41

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 40 en if no other access points are operating within the access point's range, any radio channel can be set. Otherwise the channels in the 2.4 ghz band must be selected in such a way that they do not overlap and...

  • Page 42

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 41 en if you choose automatic tcp/ip configuration, you can continue with step . Give the lancom an address from the applicable ip address range. Con- firm with next . In the window that follows, you first set t...

  • Page 43

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 42 en always use the latest version of your browser to ensure maximum security. Accessing the device with webconfig to carry out a configuration with webconfig, you need to know how to con- tact the device. Devi...

  • Page 44

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 43 en if the configuration computer does not retrieve its ip address from the lancom dhcp server, it determines the current ip address of the computer (with start run cmd and command ipconfig at the prompt under...

  • Page 45

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 44 en be reached under name "lancom-", e.G. “lancom- 00a057xxxxxx”. The mac address on a sticker on the base of the device. If there is no dns server in the lan, or if it is not coupled to the dhcp server, the d...

  • Page 46

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 45 en setup wizards the setup wizards allow quick and easy configuration of the most common device settings. Select the wizard and enter the appropriate data on the fol- lowing screens. The settings are not stor...

  • Page 47

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 3: basic configuration 46 en dns server – translates network and computer names into their actual ip addresses. The lancom oap wireless can fulfill the functions of a standard gateway and also of a dns server. It can also operate as a...

  • Page 48

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 47 en 4 security settings your lancom features numerous security functions. This chapter provides you with all of the information you need to optimally protect your device. You can carry out the configuration of s...

  • Page 49

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 48 en the passphrases for 802.11i or wpa do not have to be changed quite so regularly as new keys are generated for each connection anyway. This is not the only reason that the encryption with 802.11i/aes or wpa/t...

  • Page 50

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 49 en third-party products is assured as leps only involves configuration in the access point. An additional security aspect: leps can also be used to secure single point- to-point (p2p) connections with an indivi...

  • Page 51

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 50 en 4.2 tips for the proper treatment of keys and passphra- ses by observing a few vital rules on the treatment of keys you can significantly increase the security of encryption techniques. Keep your keys as sec...

  • Page 52

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 51 en 4.3.1 lanconfig wizard mark your lancom in the selection window. From the command line, select extras setup wizard . In the selection menu, select the setup wizard, check security settings and confirm the se...

  • Page 53

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 52 en 4.3.2 webconfig wizard with webconfig you have the option to launch the check security settings wizard to check and change any settings. The following values are edited: device password the protocols to be a...

  • Page 54

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 53 en with the access control list (acl) you can permit or prevent individual cli- ents accessing your wireless lan. The decision is based on the mac address that is permanently programmed into wireless network ad...

  • Page 55

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 54 en have you activated the firewall? The stateful inspection firewall of lancom devices ensures that you local network cannot be attacked from the outside. Activate the firewall in lanconfig under 'firewall/qos'...

  • Page 56

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 55 en have you excluded certain stations from accessing the device? A special filter list can be used to limit access to the device's internal func- tions via tcp/ip. The phrase "internal functions" refers to conf...

  • Page 57

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 4: security settings 56 en power because the device has been relocated will cause the entire confi- guration to be deleted (for further information see the reference manual)..

  • Page 58

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 57 en 5 advanced wireless lan configuration the configuration of the lancom access points for your wireless lan is con- ducted with the aid of highly convenient installation wizards. The settings...

  • Page 59

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 58 en wlan module operation the wlan modules can be operated in various operating modes: as a base station (access point mode), the device makes the link between wlan clients and the cabled lan. ...

  • Page 60

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 59 en point- to-point settings the configuration of p2p connections involves setting not only the operating mode but also the station name that the access point can connect to. Also, the role as ...

  • Page 61

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 60 en double bandwidth (40 mhz channels) a wireless lan module normally uses a frequency range of 20 mhz in which data to be transmitted is modulated to the carrier signals. 802.11a/ b/g use 48 c...

  • Page 62

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 61 en the spatial multiplexing function allows several separate data streams to be transmitted over separate antennas in order to increase data through- put. When using external antennas, please ...

  • Page 63

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 62 en the mcs selection therefore indicates the type and minimum or maximum number of modulation parameters that should be used for one or two spatial data streams. Within these limits, the appro...

  • Page 64

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 63 en you can find these parameters in webconfig or telnet under lcos menu tree setup interfaces wlan radio settings . You can find 802.11n parameter configuration for individual wireless lan net...

  • Page 65

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 64 en when using access points and appropriately polarized antennas in accor- dance with ieee 802.11n two wireless links can be established simultaneously between the end points of a point-to-poi...

  • Page 66

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 65 en selection of antennas using the lancom antenna calculator you can use the lancom antenna calculator to calculate the output power of the access points as well as the achievable distances an...

  • Page 67

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 66 en positioning the antennas antennas do not broadcast their signals linearly, but within an angle that depends on the model in question. The spherical expansion of the signal waves produces am...

  • Page 68

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 67 en r = 0.5 * √ ( λ * d) the wavelength in the 2.4 ghz band is approx. 0.125 m, in the 5 ghz band approx. 0.05 m. Example: with a separating distance of 4 km between the two antennae, the radiu...

  • Page 69

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 68 en 5.3.2 antenna alignment for p2p operations the precise alignment of the antennas is of considerable importance in esta- blishing p2p connections. The more central the receiving antenna is l...

  • Page 70

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 69 en the display of signal quality on the leds must be activated for the wireless lan interface (lanconfig: wireless lan general physical wlan settings operation ). The faster the led blinks the...

  • Page 71

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 70 en are both antennas approximately aligned? The basic p2p connection has to be working before fine-tuning can be performed with the aid of lanmonitor. Once signal monitoring has commenced, the...

  • Page 72

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 71 en in the 5 -ghz band, the automatic search for vacant wlan channels can lead to several simultaneous test transmissions from multiple access points, with the result that they do not find each...

  • Page 73

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 72 en click on the button physical wlan settings to open the corresponding wlan interface and select the tab for 'point-to-point'. Activate the suitable point-to-point operation mode here and set...

  • Page 74

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 73 en please observe that only the mac addresses of the wlan cards at the other end of the connections are to be entered here! Not the access point's own mac address, and not the mac addresses fr...

  • Page 75

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 74 en in the point-to-point configuration, select the identification by station name and enter the name of the corresponding station. Lanconfig: wireless lan general point to point partners webco...

  • Page 76

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 75 en the use of relay stations each equipped with two wlan modules simultaneously solves the problem of the "hidden station", by which the mac addresses of the wlan clients are not transferred o...

  • Page 77

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 76 en leps for p2p connections a further gain in security can be attained by additionally using lancom enhanced passphrase security (leps) which involves the matching of mac address and passphras...

  • Page 78

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 77 en whereupon they act as conventional wireless lan adapters and not as access points (ap). The use of client mode therefore allows devices fitted with only an ethernet interface, such as pcs a...

  • Page 79

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 78 en to edit the settings for client mode in lanconfig, go to the 'client mode' tab under the physical wlan settings for the desired wlan interface. In 'scan bands', define whether the client st...

  • Page 80

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 5: advanced wireless lan configuration 79 en to enter the key, change to the '802.11i/wep' tab under lanconfig in the 'wireless lan' configuration area. From 'wpa / private wep settings', select the first wlan interface from the list ...

  • Page 81

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 6: setting up internet access 80 en 6 setting up internet access the lancom provides a central point of internet access for all of the compu- ters in the lan. The connection to the internet provider can be established via the wan conn...

  • Page 82

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 6: setting up internet access 81 en 6.1 the internet connection wizard 6.1.1 instructions for lanconfig mark your device in the selection window. From the command line, select extras setup wizard . In the selection menu, select the se...

  • Page 83

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 6: setting up internet access 82 en depending on availability the wizard provides further options for your internet connection. The wizard will inform you as soon as the entries are complete. Close the configuration with finish . 6.2 ...

  • Page 84

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 6: setting up internet access 83 en finally the new rule is given a name, it is activated, and you define whe- ther further rules are to be considered when the rule acts on a data packet. The wizard will inform you as soon as the entr...

  • Page 85

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 7: options and accessories 84 en 7 options and accessories your lancom device has numerous extensibilities and the possibility to use a broad choice of lancom accessories. You find in this chapter information about the available acces...

  • Page 86

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 7: options and accessories 85 en interaction with the reflected radio waves can cause a drop in signal strength, or even cause it to be cancelled out completely. Transmission quality can be improved with so-called "diversity" methods....

  • Page 87

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 7: options and accessories 86 en before mounting external antennas, please observe the information on lightning protection in the lancom outdoor wireless guide (sup- plied or available as a download from www.Lancom.Eu ). Mounting ante...

  • Page 88

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 7: options and accessories 87 en possible to connect all airlancer extender antennas to a wide variety of third-party products. It is also possible to attach an additional antenna to the second wireless module. Relay operation require...

  • Page 89

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 7: options and accessories 88 en with additional functions for authentication and billing for public internet ser- vices. Authentication and billing for individual users is implemented with user- friendly web pages, enabling client pc...

  • Page 90

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 7: options and accessories 89 en 7.3 lancom vpn option lancom oap-54 wireless only the lancom vpn option is an upgrade which advances your device to a vpn gateway with hardware encryption. In combination with the vpn encryption which ...

  • Page 91

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 8: advice & assistance 90 en 8 advice & assistance see this chapter for first-aid assistance if some of the typical problems should occur. 8.1 no wan connection can be established after starting, the router attempts automatically to c...

  • Page 92

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 8: advice & assistance 91 en increasing the tcp/ip window size under windows if the actual transmission speed over a dsl connection is significantly lower than the maximum specified by the dsl provider, there are very few potential er...

  • Page 93

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 9: appendix 92 en 9 appendix 9.1 performance data and specifications lancom oap-54 wireless lancom oap-310agn wireless frequency band two wlan modules with 2400 - 2483,5 mhz (ism) or 5150 - 5750 mhz each wlan module with 2400 - 2483,5...

  • Page 94

    Lancom oap - 54 wireless and lancom oap - 310agn wireless chapter 9: appendix 93 en 9.2 connector wiring 9.2.1 ethernet interface 10/100base-tx, dsl interface 8-pin rj45 sockets (iso 8877, en 60603-7) 9.3 ce-declarations of conformity lancom systems herewith declares that the devices of the type des...

  • Page 95

    Lancom oap - 54 wireless and lancom oap - 310agn wireless index 94 en index numerics 100-mbit network 28 802.11i 21 , 47 , 48 , 51 , 52 802.11i/ 48 802.1x 21 , 47 , 48 a access point mode 9 , 24 access-control list 49 acl 48 , 49 aes 47 antenna calculator 65 antenna power 67 autosensing 28 c charge ...

  • Page 96

    Lancom oap - 54 wireless and lancom oap - 310agn wireless index 95 en lancom enhanced passphrase security 47 lancom public spot option 87 lanconfig 35 , 40 starting the wizards 81 lanmonitor 35 lantools system requirements 24 leds see status displays 24 leps 21 , 48 m mac address filter 21 managed m...

  • Page 97

    Lancom oap - 54 wireless and lancom oap - 310agn wireless index 96 en v vpn 20 w webconfig 41 https 41 system requirements 24 wep 21 , 47 , 50 , 51 , 52 wireless lans operating modes 10 wlan bands scanned 78 client mode 77 wpa 21 , 47 , 48 , 51 , 52.