Land Pride 310-254S Assembly Instructions

1

© Copyright 2005

Printed

Before You Start

Your Front Roller Kit is exclusively designed for your

Land Pride groming mower. Please read these

installation instructions and your groming mower

Operator’s Manual thoroughly before beginning.

Especially read information relating to safety concerns.

Also included in the Operator’s Manual is important

information on operation, adjustment, troubleshooting,

and maintenance for this attachment (some manual

sections do not apply to all accessories).

A separate Parts Manual for replacement parts can be

purchased from your dealer or available free of charge at

www.landpride.com. Have model and serial numbers

handy when placing an order.

Manual Part Numbers:

• Operator’s Manual . . . . . . . . . . . . . . . . . 310-262M

• Parts Manual . . . . . . . . . . . . . . . . . . . . . 310-069P

General Information

These assembly instructions apply to the

Front Roller

option listed

 below:

310-254S

FRONT ROLLER ASSEMBLY

Tools required:

•

Safety Glasses

•

Work Gloves

•

Two 3/4" wrenches

•

Two 9/16" wrenches

When you see this symbol, the subsequent

instructions and warnings are serious - follow

without exception. Your life and the lives of

others depend on it!

!

IMPORTANT: Before you begin, read these

instructions and check to be sure all parts and tools

are accounted for. Please retain these installation

instructions for future reference and parts ordering

information.

Assembly Instructions

A detailed listing of parts for each accessory kit is

provided on page 2. Use the list that is for your groming

mower as a checklist to inventory parts received. Please

contact your local Land Pride dealer for any missing

hardware.

Front Roller Assembly

Refer to Figure 1:

1.

Remove the front two 1/2”-13 x 1 1/2” GR5 hex flange

serrated screws (#9) and reinsert from the bottom as

shown. Secure with existing 1/2” whiz nuts (#10).

Tighten nuts to 76 ft-lbs of torque.

2.

Assemble brackets (#2) and (#3) to deck with

carriage bolts (#4) and flange nuts (#5).

3.

Insert roller (#8) between brackets and install pin

(#1) through brackets and roller. Secure with washer

(#6) and cotter pin (#7).

FDr2560, FDR2572 & FDR2572 Front Roller Assembly

Figure 1

17713

FDR2560, FDR2572 & FDR2584 Models

Front Roller Kit

Assembly Instructions

9/29/06

Manual No. 310-324M