Land Pride 55 Series User Manual

1

© Copyright 2007

Printed

Before You Start

Your Shredder Kit is exclusively designed for your Land

Pride 55 and 65 Series Rotary Cutter. Please read these

installation instructions and your Rotary Cutter

Operator’s Manual thoroughly before beginning.

Especially read information relating to safety concerns.

Also included in the Operator’s Manual is important

information on operation, adjustment, troubleshooting,

and maintenance for this attachment (some manual

sections do not apply to all accessories).

A separate Rotary Cutter Parts Manual is available free

of charge at www.landpride.com or can be purchased

from your nearest Land Pride dealer. Have the model

and serial numbers of your cutter handy when placing an

order.

Manual Part Numbers:

• Operator’s Manual . . . . . . . . . . . . . . . . . 318-721M

• Parts Manual . . . . . . . . . . . . . . . . . . . . . 318-721P

General Information

These assembly instructions apply to the Shredder Kit

listed below:

330-094A

RC(M)5515 & RC(M)6515 SHREDDER KIT

When you see this symbol, the subsequent

instructions and warnings are serious - follow

without exception. Your life and the lives of

others depend on it!

!

IMPORTANT: Before you begin, read these

instructions and check to be sure all parts and tools

are accounted for. Please retain these installation

instructions for future reference and parts ordering

information.

NOTE: Land Pride recommends safety glasses and

work gloves be worn while working on the Rotary

Cutter.

Further Assistance

Your dealer wants you to be satisfied with your new

Shredder Kit. If for any reason you do not understand any

part of this manual or are not satisfied with the service

received, the following actions are suggested:

1.

Discuss the matter with your dealership service

manager making sure he is aware of any problems

you may have and that he has had the opportunity to

assist you.

2.

If you are still not satisfied, seek out the owner or

general manager of the dealership, explain the

problem and request assistance.

3.

For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

Safety Information

!

WARNING

Never work under equipment supported by hydraulics.

Hydraulics can drop equipment if controls are actuated or if

hydraulic lines burst. Either situation can drop the cutter

instantly even when power to the hydraulics is shut off.

!

DANGER

Always disconnect main driveline from tractor PTO before

servicing the cutter deck. Cutter can be engaged if tractor is

started resulting in damage to the cutter, bodily injury and/or

death.

Shredder Assembly Instructions

A detailed listing of parts for this accessory kit is provided

on page 4. Use the list as a checklist to inventory parts

received. Please contact your local Land Pride dealer for

any missing hardware.

Refer to Figure 2 on page 2:

1.

Remove all three existing blade carrier assemblies

from the gearbox output shafts. Keep flat washers

(D), slotted hex nuts (E) and cotter pins (F) for reuse.

IMPORTANT: Read “Safety Information” above

before installing the shredder blades.

For RC(M)5515 & RC(M)6515 Rotary Cutters

Shredder Kit

8/20/07

Manual No. 330-094M