Land Pride DH3512 Specifications & Capacities
33
Disc Harrows
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
DH35 Series
Description
DH3510
DH3512
Drawbar horsepower requirement
45-75 hp
55-80 hp
Hitch type
Pull-type w/clevis & hole for 1 1/4" pin
Hitch frame construction
3"x 3" x 1/4" Wall tubing w/hose carrier and jack mount
Transport width
10’ -10" Base unit
12’-4" Base unit
Max. cultivation width
10’- 6" Approx.
12’-0" Approx.
Mainframe Width
93"
Approx weight load on each blade
with 7.5" spacing
79 to 84 lbs
76 to 82 lbs
Approx weight load on each blade
Blade with 9" spacing
87 to 93 lbs
81 to 86 lbs
Disc blade sizes and types
20" or 22" Notched or smooth
Disc blade spacing
7.5" or 9"
Disc bearing type
Greaseable & triple sealed ball bearings
Number of bearings
12 For all ten foot disc configurations
12 For 9" disc spacing
16 For 7.5" disc spacing
Forward gang angle adjustment
Single pin adjustment to 15, 16 1/2, 18, 19 1/2 or 21 degrees
Rear gang angle adjustment
Single pin adjustment to 12, 13 1/2, 15, 16 1/2 or 18 degrees
Side mainframe construction
3" x 4" x 3/16" Wall tubing
with gusset reinforcements
3" x 4" x 3/16" Wall tubing
with gusset reinforcements
Mainframe front tube
5"x 3" x 1/4" Wall tubing
Center gang beam construction
4"x 3" x 1/4" Wall tubing
Gang swing arm
4"x 3" x 1/4" Wall tubing
Gang axle construction
1 1/8" Square hi-strength steel
Front to rear leveling system
Manual crank adjustment
Depth control
Cylinder
stroke control spacers
Hydraulic cylinder
for depth/lift control
3"x 8" Hydraulic cylinder with hoses and fittings
Transport tires & rims
Two 9.5L x 15 tires mounted on 15" x 6" 5-bolt rims
Disc scrapers
Optional
Center sweep kit
Optional
20" Rear furrow filler pair
Optional
18" Rear furrow filler pair
Optional
Tongue jack
Optional
Dual wheel transport kit
Optional
322-251S continued on next page
6/09/10