Land Pride HD35 Specifications & Capacities
65
Post Hole Diggers Hydraulic Drive
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
HD25 and HD35 Models
HD25
(3-Point)
HD25
(Bucket Mount)
HD35
(3- Point)
HD35
(Bucket Mount)
Hydraulic Hoses
Standard
Optional
Standard
Optional
Maximum Auger RPM
109 RPM
105 RPM
109 RPM
105 RPM
Gallons Per Minute Rating
5 -12 GPM @ 1500 to 3000 PSI
10 -25 GPM @ 1500 to 3000 PSI
Max torque @ 2500 PSI
700 ft. lbs.
1605 ft. lbs.
Weight with 6” Auger
235 lbs.
185 lbs.
235 lbs.
189 lbs.
Auger Length
48”
Auger Flighting Thickness
1/4”
Auger Pipe
2 1/2” dia.
Auger Teeth
Forged, Individually Replaceable
40 Degree Angle Installed on Flat Side
50 Degree Angle Installed on Angled Side
Number of Teeth
(6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth)
Pilot
Cast steel, 3 drill points
Auger Drive
Hydraulic
Gearbox
3.18:1 Ratio
Gearbox oil capacity & Type
4.7 Pints of Gear Lube 80-90W EP
Output Shaft on Gearbox
2” O.D. Round
Hitch
Cat I or II
Bucket Mount
Cat I or II
Bucket Mount
Yoke
2 7/8” Tubing
Not Applicable
2 7/8” Tubing
Not Applicable
Boom
Reinforced Tubing
Not Applicable
Reinforced Tubing
Not Applicable
Options and Accessories
Auger Sizes
6”, 9”, 12”, 15”, 18” or 24”
Hydraulic Hoses
Not Applicable
(2)-24 ft. long hoses
Not Applicable
(2)-24 ft. long hoses
Hydraulic
Down Pressure Kit
Available
Not Applicable
Available
Not Applicable
Storage Stand
Available
Not Applicable
Available
Not Applicable
Auger Extensions
7” and 14” Extensions Available
317-076S continued on next page
6/24/11
Hydraulic Drive