1. DL manuals
  2. Land Pride
  3. Lawn Mower
  4. RC5020 Series
  5. Operator's Manual

Land Pride RC5020 Series Operator's Manual

Other manuals for RC5020 Series: Specifications & Capacities, Specifications & Capacities
Manual is about: Land Pride Rotary Cutter Operator's Manual

Summary of RC5020 Series

  • Page 1

    Table of contents cover photo may show optional equipment not supplied with standard unit. Read the operator’s manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! ! © copyright 201...

  • Page 2

    Table of contents rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 © copyright 2012 all rights reserved land pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manu...

  • Page 3

    1 important safety information 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents important safety information these are common practices that may or may not be applicable to the products described in this manual. Safety at all times thoroughly read and underst...

  • Page 4

    2 important safety information rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents transport machinery safely ▲ comply with state and local laws. ▲ maximum transport speed for implement is 20 mph. Do not exceed. Never travel at a speed which does not allow adequ...

  • Page 5

    3 important safety information 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents prepare for emergencies ▲ be prepared if a fire starts. ▲ keep a first aid kit and fire extinguisher handy. ▲ keep emergency numbers for doctor, ambulance, hospital and fire depar...

  • Page 6

    4 important safety information rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents 23595 818-045c pinch point warning 27523 818-130c caution! Use 540 rpm pto only 818-240c caution! Use 1000 rpm pto only safety labels your cutter comes equipped with all safety la...

  • Page 7

    5 important safety information 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents 23595 27523 23594 23571 818-552c danger! Rotating driveline entanglement hazard rotating driveline keep away!.

  • Page 8

    6 important safety information rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents 23571 23594 27523 23595 818-543c danger! Guard missing - do not operate 818-540c danger! Shield missing - do not operate.

  • Page 9

    7 important safety information 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents 27523 27523 27523 27523 818-276c warning! Rotating blade hazard tractor must have safety guarding 818-840c danger: rollover hazard 818-561c warning! Moving parts hazard located on...

  • Page 10

    8 important safety information rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents 838-588c warning: folding cutter speed warning 838-094c warning: high pressure 23594 23594 23594 23594 818-556c danger! Thrown object hazard located on left wing & right wing 818-...

  • Page 11

    9 important safety information 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents 23595 23595 818-229c amber reflector located on left wing & right wing 818-230c red reflector located on left wing & right wing.

  • Page 12

    10 introduction rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents introduction if customer service or repair parts are required contact a land pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the cutter. The parts on y...

  • Page 13

    11 section 1: assembly and set-up 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents section 1: assembly and set-up tractor requirements horsepower tractor horsepower should be within the range noted below. Tractors outside the horsepower range must not be used...

  • Page 14

    12 section 1: assembly and set-up rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents hitch types refer to figure 1-2: the cutter is factory supplied with a standard clevis hitch. Other optional hitches are available. They are the double swivel clevis hitch, bar...

  • Page 15: Warning

    13 section 1: assembly and set-up 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents hitch assembly refer to figure 1-3: 1. Install clevis rod (#1) to the deck center lug using 3/4" x 1 1/2" clevis pin (#6), 3/4" flat washer (#4) and 5/32" x 1 1/4" cotter pin (...

  • Page 16: Danger

    14 section 1: assembly and set-up rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents standard clevis hitch hook-up ! Danger a crushing hazard exists when hooking-up equipment to a tractor. Do not allow anyone to stand between tractor and implement while backing...

  • Page 17: Danger

    15 section 1: assembly and set-up 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents tractor hookup to swivel clevis hitch figure 1-7 attach swivel clevis hitch to rotary cutter ! Danger a crushing hazard exists when hooking-up equipment to a tractor. Do not al...

  • Page 18: Danger

    16 section 1: assembly and set-up rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents tractor hookup to bar-tite hitch figure 1-9 attach tractor to rotary cutter ! Danger a crushing hazard exists when hooking-up equipment to a tractor. Do not allow anyone to sta...

  • Page 19: Danger

    17 section 1: assembly and set-up 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents refer to figure 1-9 on page 16: 5. Secure chains (#6) on driveline (#5) around hitch clevis rod to restrict driveline outer shield from rotating. Re-latch safety chain to drive...

  • Page 20: Danger

    18 section 1: assembly and set-up 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents refer to figure 1-9 on page 16: 1. Route cylinder hoses (#7) through hose support loop and connect to tractor remote outlets. If the tractor has a float option on one of the ou...

  • Page 21

    19 section 2: adjustments 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents leveling center deck & wings these adjustments should be made with your cutter hooked up to the same tractor that will be used for field operations or one having the same drawbar heigh...

  • Page 22: Caution

    20 section 2: adjustments rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents wing deck leveling refer to figure 2-3: each wing section will need adjusting if wing top is not level with center deck top when wings are unfolded. 1. With tractor hydraulics, lower w...

  • Page 23: Danger

    21 section 3: operating instructions 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents pre-start checklist hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training involved in the operation, transport, main...

  • Page 24

    22 section 3: operating instructions rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents 4. Initial start-up vibration is normal and should stop after a few revolutions. Stop pto rotation immediately if vibration continues. 5. Once cutter is running smoothly, in...

  • Page 25: Danger

    23 section 3: operating instructions 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents safety information ! Danger do not operate cutter with one or both wings folded up. This can cause the driveline to break apart and throw objects at the operator or a bystan...

  • Page 26: Caution

    24 section 3: operating instructions rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents ! Caution do not exceed the rated cutting capacity! See specifications & capacities for specified cutting capacity. Using this cutter for any other type of work can damage d...

  • Page 27

    25 section 3: operating instructions 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents set wing lift lever in float position use the float position of your tractor’s hydraulic system to provide automatic floating of the wings for varying terrain conditions. Th...

  • Page 28

    26 section 3: operating instructions rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents general operating instructions be sure to read entire manual before proceeding with these operating instructions. Now that you have familiarized yourself with the operator’s...

  • Page 29: Danger

    27 section 4: options & accessories 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents safety guard options ! Danger rotary cutters have the ability to discharge objects at high speeds; therefore, the use of front and rear safety guards is strongly recommended ...

  • Page 30

    28 section 4: options & accessories rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents hydraulic accessories land pride offers three different kits for raising the deck wings independently to clear small obstacles in the field without maneuvering around them. H...

  • Page 31

    29 section 4: options & accessories 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents shredder and baffle options refer to figure 4-4: the double stacked blade configuration t (#1) is ideal for cutting residue into smaller pieces. A baffle kit (#2) can be adde...

  • Page 32: Danger

    30 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents general maintenance information proper servicing and adjustment is the key to the long life of any implement. With careful inspection and routine maintenance, you can avo...

  • Page 33

    31 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents refer to figure 5-2: 3. Remove wing nuts (#12), lock washers (#11), flat washer (#10)and access cover (#7). Rotate blade bolt (#1) until in alignment with access hole (a)...

  • Page 34: Caution

    32 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents skid shoe maintenance ! Caution excessive wear on skid shoes may cause inadequate operation of cutter and create a safety hazard! There are two skid shoes mounted on eith...

  • Page 35: Warning

    33 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents drivelines with slip clutches ! Warning always disengage pto, place tractor in park or set park brake, shut tractor engine off, remove switch key, and wait for blades to ...

  • Page 36: Caution

    34 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents refer to figure 5-8: disassembly of clutch is simply a matter of first removing spring retainer nuts (#1), springs (#2) and bolts (#3) from the assembly. Each friction di...

  • Page 37

    35 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents step 2 tighten the four hex nuts uniformly until the clutch pack and hub are loose. Step 3 bend all four retaining lugs out on edge of clutch housing. Step 4 remove thrus...

  • Page 38: Warning

    36 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents tire maintenance ! Warning tire changing can be dangerous and should be preformed by trained personnel using correct tools and equipment. When removing and installing whe...

  • Page 39

    37 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents ordering replacement parts land pride offers equipment in factory standard beige with black highlights. Equipment may also be purchased in green, red or orange. Special a...

  • Page 40

    38 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents adjustable turnbuckle type of lubrication: multi-purpose grease quantity = as required lubrication points 50 hrs multi-purpose spray lube multi-purpose grease lube multi-...

  • Page 41

    39 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents gearbox method 1: unscrew top vented dipstick (#1). Wipe oil from dipstick and screw dipstick in without tightening. Unscrew dipstick and check oil on dipstick. If below ...

  • Page 42

    40 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents conventional driveline profile tubes type of lubrication: multi-purpose grease quantity = coat generously 20 hrs drivelines with external profile tube grease point drivel...

  • Page 43

    41 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents constant velocity driveline joints & shields type of lubrication: multi-purpose grease • the constant velocity joint should be greased in a straight position forcing grea...

  • Page 44

    42 section 5: maintenance & lubrication rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents wing driveline profile tubes type of lubrication: multi-purpose grease quantity = coat generously 20 hrs wing driveline joints & shields type of lubrication: multi-purpos...

  • Page 45

    43 section 5: maintenance & lubrication 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents intermediate driveline joints type of lubrication: multi-purpose grease 8 hrs double swivel clevis hitch 1-zerk type of lubrication: multi-purpose grease 50 hours bar-tit...

  • Page 46

    44 section 7: specifications & capacities rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents section 7: specifications & capacities rc5020 & rcm5020 models min. Pto horse power 70 gear box horsepower 250 hp splitter 210 hp center & wing gear box lubrication & c...

  • Page 47

    45 section 7: specifications & capacities 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents 26843 26841 20'-9 1/2" 19'-3" 3'-6 1/8" 9'-9 3/4" 8'-9" 10'-9" transport width with wing axles disconnected at the turnbuckles and wheels folded back (see figure 1-4 on...

  • Page 48

    46 section 8: features and benefits rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents section 8: features and benefits * years 6 & 7 parts only rc5020 & rcm5020 models features benefits surpassed rugged industry standards all land pride cutters have been desig...

  • Page 49

    47 section 6: troubleshooting 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents section 6: troubleshooting troubleshooting chart problem solution oil seal leaking drain to level full hole. Replace seals. Clean off wrapped material and check seal areas daily. D...

  • Page 50

    48 section 9: torque & tire inflation charts rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m 4/25/12 table of contents section 9: torque & tire inflation charts torque values chart for common bolt sizes in-tpi 1 n · m ft-lb 3 n · m ft-lb n · m ft-lb mm x pitch n · m ft-lb n · m ft-lb...

  • Page 51

    49 section 10: warranty 4/25/12 rc5020 (540 rpm) and rcm5020 (1000 rpm) rotary cutters 318-474m table of contents warranty land pride warrants to the original purchaser that this land pride product will be free from defects in material and workmanship beginning on the date of purchase by the end use...

  • Page 52

    Corporate office: p.O. Box 5060 salina, kansas 67402-5060 usa.