Land Pride RCRM2510 Series Specifications & Capacities
104
Rotary Cutters Single Deck
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RCR25 Series
RCR2596 (540 RPM)
RCR2510 (540 RPM)
RCRM2510 (1000 RPM)
Machine Weight (With Front and
Rear Chain Shields)
Lift-Type 1,380 lbs.
Pull-type 1,665 lbs.
Lift-Type 1,750 lbs
Pull-Type 2,035 lbs.
Hitch
Lift-Type Category 1 & 2
Quick hitch adaptable
Pull-Type - w/Dual Level Rods
Lift-Type Category 2 & 3
Quick-Hitch adaptable
Pull-Type - w/Dual Level Rods
Cutting Width
94”
118”
Overall Width
99 3/4”
123 1/2”
Overall Length
Lift-Type: 106”
Pull-Type: 140 3/4”
Lift-Type: 112”
Pull-Type: 150”
Deck Height
9 5/8”
Cutting Height
2” - 12”
Cutting Capacity
1 1/2”
1"
Tractor H.P. Rating (PTO)
Lift-Type: 50 - 110
Pull-Type: 40 - 110
Lift-Type: 60 - 110
Pull-Type: 50 - 110
PTO Speed
Gearbox Rating H.P.
Center - 100 HP Outboard 60 HP
Gearbox
(Speed up beveled gears)
540 rpm or 1000 rpm PTO Driven Gearbox
Cast Iron Housing, Beveled Gears
Gearbox Lubrication
80-90W EP
Gearbox Oil Capacity
End Boxes
T-Box
2.5 Pints
4.5 Pints
2.5 Pints
4.5 Pints
Gear box Input/ Output Shaft Size
Input Shaft = 1 3/4” - 20 Spline
Output Shaft = 2” Dia.
Deck Material Thickness
10 gauge
Deck Side Skirt Thickness
Skids
Replaceable
Stump Jumper
Round Pan 3/16”
Blades (2)
1/2” x 4" Heat Treated
Free-Swinging Suction Blades
Blade Bolts
Keyed with Harden Flat Washer and Lock Nut
Blade Tip Speed
540 RPM 14,592 fpm
540 RPM 17,749 fpm
1000 RPM 18,035 fpm
Driveline
Cat 4, w/Equal Angle U-Joint
Cat 4 w/Equal Angle U-Joint or
Constant Velocity U-Joint
Driveline Protection
540 rpm - 4 plate slip clutch
1000 rpm - 2 plate slip clutch
Tailwheel
Lift-Type: 2 ea. 4” x 8” x 15 1/4” Laminated
Pull-Type: 2 ea. 6” x 9” x 21” Laminated or 24” Aircraft tires or 15” Automotive Rims
Optional Safety Shields
Front & Rear Chain/ Front & Rear Rubber
312-753S continues on next two pages
3/05/12