Landa SEA3-1100 Operator's Manual - Sea Series Pressure Washer
SEA SERIES PRESSURE WASHER
OPERATOR’S MANUAL
3
LANDA SEA • Rev. 4/02
INTRODUCTION
Thank you for purchasing a Landa Pressure Washer.
This manual covers the operation and maintenance of
the SEA3-11021D, SEA4-20021A, SEA4-20021B,
SEA4-20021C, SEA4-20021F, SEA4-20021G,
SEA4-20021H, SEA4-30021B, SEA4-30021C,
SEA4-30021F, and SEA4-30021H washers. All informa-
tion in this manual is based on the latest product infor-
mation available at the time of printing.
Landa, Inc. reserves the right to make changes at any
time without incurring any obligation.
The SEA Series was designed for maximum
use of 8 hours per day, 5 days per week.
Owner/User Responsibility:
The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this Landa pressure washer. Warning infor-
mation should be emphasized and understood. If the op-
erator is not fluent in English, the manufacturer’s instruc-
tions and warnings shall be read to and discussed with
the operator in the operator’s native language by the pur-
chaser/owner, making sure that the operator compre-
hends its contents.
Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.
This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.
When ordering parts, please specify model and
serial number.
IMPORTANT SAFETY
INFORMATION
CAUTION: To reduce the risk of
injury, read operating instruc-
tions carefully before using.
1. Read the owner's manual thor-
oughly. Failure to follow instruc-
tions could cause malfunction
of the machine and result in
death, serious bodily injury and/
or property damage.
2. Know how to stop the machine and bleed pressure
quickly. Be thoroughly familiar with the controls.
3. Stay alert -- watch what you are doing.
4. All installations must comply with local codes. Con-
tact your electrician, plumber, utility company or the
selling distributor for specific details.
To comply with the National Electrical code (NFPA
70) and provide additional protection from risk of elec-
tric shock, these pressure washers are equipped with
a UL approved ground fault circuit interrupter (GFCI)
power cord.
WARNING: Flammable liquids
can create fumes which can ignite
causing property damage or se-
vere injury.
WARNING: Risk of explosion —
do not spray flammable liquids.
5. Risk of explosion — do not
spray flammable liquids or op-
erate in an explosive location.
WARNING: Keep water spray
away from electrical wiring or fa-
tal electric shock may result.
6. To protect the operator from
electrical shock, the machine
must be electrically grounded.
It is the responsibility of the
owner to connect this machine
to a UL grounded receptacle of
proper voltage and amperage ratings. Do not spray
water on or near electrical components. Do not touch
machine with wet hands or while standing in water.
Always disconnect power before servicing.
7. Grip cleaning wand securely with both hands before
star ting. Failure to do this could result in injury from
a whipping wand.
WARNING: High pressure stream
of fluid that this equipment can
produce can pierce skin and its un-
derlying tissues, leading to serious
injury and possible amputation.
8. High pressure developed by
these machines will cause
personal injury or equipment
damage. Use caution when op-
erating. Do not direct discharge stream at people, or
severe injury or death will result.
9. Never make adjustments on machine while in op-
eration.
WARNING: High pressure spray
can cause paint chips or other
particles to become airborne and
fly at high speeds.
10. Eye safety devices and foot
protection must be worn when
using this equipment.
WARNING
RISK OF EXPLOSION:
DO NOT USE WITH
FLAMMABLE
LIQUIDS.
WARNING
USE PROTECTIVE
EYEWEAR
WHEN OPERATING
EQUIPMENT.
WARNING
HIGH PRESSURE
STREAM CAN
PIERCE SKIN AND
TISSUES.
WARNING
KEEP WATER SPRAY
AWAY FROM
ELECTRICAL WIRING.
WARNING
READ OPERATOR’S
MANUAL
THOROUGHLY
PRIOR TO USE.
CAUTION