Landa SLT6-32624E Operator's Manual

Manual is about: Kubota Diesel engines

Summary of SLT6-32624E

  • Page 1

    Operator’s manual for technical assistance or the dealer nearest you, consult our web page at www.Landa.Com slt/slx kubota diesel engine 9.807-540.0 slt6-32624e 1.110-065.0 slt8-32824e 1.110-066.0 slx10-32624e 1.110-067.0 9.8 01- 427 .0 of f glst do not ove rload ge ner ato r units equipp ed w ith o...

  • Page 2: Symbols

    Identification of operational label symbols hour meter temperature when the light is on, it means the engine is overheating. Turn machine off and perform maintenance. Glow plug when the light is on, the engine is being pre-heated. When the light turns off, the engine can be started. Low oil when the...

  • Page 3: Contents

    3 model number ______________________________ serial number ______________________________ date of purchase ____________________________ the model and serial numbers will be found on a decal attached to the pressure washer. You should record both serial number and date of purchase and keep in a safe...

  • Page 4: Important Safety

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 4 introduction & important safety information thank you for purchasing this pressure washer. We reserve the right to make changes at any time without incurring any obligation. Owner/user respon...

  • Page 5: Important Safety Information

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 5 pressure w asher opera tor’s manu al 15. Be certain all quick coupler fittings are secured before using pressure washer. Risk of injection or severe injury to persons. Keep clear of nozzle. Warning warning: high pressure devel- ...

  • Page 6: Important Safety Information

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 6 important safety information 21. Do not allow acids, caustic or abrasive fluids to pass through the pump. 22. Never run pump dry or leave spray gun closed longer than 1-2 minutes. 23. Machine...

  • Page 7: Component Identification

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 7 pressure w asher opera tor’s manu al component identification pump — delivers a specific gpm to the high pressure nozzle which develops pressure. Spray gun — controls the application of water and detergent onto cleaning surface ...

  • Page 8: Assembly Instructions

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 8 98075400-5 98075400-6 98075400-8 assembly instructions step 1: attach a 5/8" water supply hose to inlet connector. Minimum flow should be 10 gpm depending on model of machine. Step 3: attach ...

  • Page 9: Operating Instructions

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 9 pressure w asher opera tor’s manu al 9.801-427. 0 of f glst do not overload genera tor units e quipped with op tional gene rator should not exc eed 1000 wa tts resi stive load. See se rvic e manual for details . Ca utio n on 980...

  • Page 10: Thermal Pump

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 10 warning: some detergents may be harmful if inhaled or ingested, causing severe nau- sea, fainting or poisoning. The harmful elements may cause property damage or severe injury. Step 1: use d...

  • Page 11: Shut Down and Clean-Up

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 11 pressure w asher opera tor’s manu al shut down and clean-up caution: always store your pressure washer in a location where the temperature will not fall below 32°f (0°c). The pump in this machine is susceptible to permanent dam...

  • Page 12: Troubleshooting

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 pressure w asher tr oub leshooting guide 12 troubleshooting problem possible cause solution low operating pressure faulty pressure gauge install new gauge. Insufficient water supply use larger supply hose; clean filter at water in...

  • Page 13: Troubleshooting

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 13 pressure w asher tr oub leshooting guide troubleshooting problem possible cause solution burner will not light (continued from previous page) flex coupling slipping on fuel pump shaft or burner motor shaft replace if needed. On...

  • Page 14: Troubleshooting

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 pressure w asher tr oub leshooting guide 14 troubleshooting problem possible cause solution low water temperature improper fuel or water in fuel replace with clean and proper fuel. Low fuel pressure increase fuel pressure. Weak fu...

  • Page 15: Troubleshooting

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 15 pressure w asher opera tor’s manu al troubleshooting problem possible cause solution oil dripping oil seal worn check and replace if necessary. Excessive vibration in delivery line irregular functioning of the valves check and ...

  • Page 16: Engine Troubleshooting

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 16 possible causes symptom low fuel level x x x fuel supply/return lines clogged x x x x clogged fuel tank vent x x fuel pump faulty x x x fuel entrained with air x x x x unit injector(s) fault...

  • Page 17: Maintenance & Service

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 17 pressure w asher opera tor’s manu al maintenance & service 1. Check to see that water pump is properly lubricated. 2. Follow winterizing instructions to prevent freeze damage to pump and coils. 3. Always neutralize and flush de...

  • Page 18: Maintenance & Service

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 18 maintenance & service removal of soot and heating coil: in the heating process, fuel residue in the form of soot deposits may develop between the heating coil pipe and block air flow which w...

  • Page 19: Maintenance & Service

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 19 pressure w asher opera tor’s manu al maintenance & service fuel grade/type comments jp 8 turbine fuel 5-12% reduction in power and up to 30% reduction in fuel system component and cylinder life. Jp 5 turbine fuel refer to jp 8 ...

  • Page 20: Maintenance & Service

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 opera tor’s manu al pressure w asher 20 6. Remove top tank wrap, bend back insulation tabs and fold back blanket. 7. Remove bolts that hold down coil to bottom wrap. 8. Remove coil. 9. Replace or repair any insulation found to be ...

  • Page 21: Preventative Maintenance

    Landa slt/slx kubota diesel operator manual • 9.807-540.0 • rev. 6/13 21 pressure w asher opera tor’s manu al preventative maintenance oil change record check pump oil level before first use of your new power washer. Change pump oil after first 50 hours and every 3 months or 500 hours thereafter. Us...

  • Page 22

    Landa limited new product warranty pressure washers what this warranty covers all landa pressure washers are warranted by landa to the original purchaser to be free from defects in materials and workmanship under normal use, for the periods specified below. This limited warranty is subject to the ex...

  • Page 24

    Form #9.807-540.0 • revised 6/13 • printed in u.S.A..