1. DL manuals
  2. LandCell
  3. Modem
  4. SMC-CDMA Series
  5. User manual

LandCell SMC-CDMA Series User manual

Manual is about: SMC Embedded Wi reless Modem CDMA 1XRTT Universal Socket

Summary of SMC-CDMA Series

  • Page 1

    S s m m c c - - c c d d m m a a - - x x x x x x l a n d c e l l s m c e m b e d d e d w i r e l e s s m o d e m c d m a 1 x r t t u n i v e r s a l s o c k e t user manual 001-0004-819 rev01; november 2011.

  • Page 2

    Revision history rev00 released 01/2010 rev01 minor corrections added appendix for dun connection 11/2011.

  • Page 3

    Table of contents section 1 - preface ........................................................................................... 5 copyright notice ................................................................................................... 5 modem design considerations ........................

  • Page 4

    Table of contents section 10 - at command reference .............................................................. 35 at command types ............................................................................................ 35 command line syntax ....................................................

  • Page 5

    001-0004-819 rev01 page 5 of 62 s s e e c c t t i i o o n n 1 1 - - p p r r e e f f a a c c e e copyright notice ©2010 calamp. All rights reserved. This manual covers the operation of the calamp smc-cdma embedded wireless modem. Specifications described are typical only and are subject to normal man...

  • Page 6

    001-0004-819 rev01 page 6 of 62 modem use the smc-cdma modem is designed and intended for use in fixed and mobile applications. ―fixed‖ assumes the device is physically secured at one location and not easily moved to another location. Please keep the cellular antenna of the smc-cdma at a safe distan...

  • Page 7

    001-0004-819 rev01 page 7 of 62 s s e e c c t t i i o o n n 2 2 - - a a b b b b r r e e v v i i a a t t i i o o n n s s abbreviation description apn access point name cdma code division multiple access csd circuit switched data cts clear to send dcd data carrier detect dce data communication equipme...

  • Page 8

    001-0004-819 rev01 page 8 of 62 s s e e c c t t i i o o n n 3 3 - - p p r r o o d d u u c c t t o o v v e e r r v v i i e e w w module identification label information the label contains the calamp part number, serial number, fcc id, and the meid number. Meid: the mobile equipment identifier of the ...

  • Page 9

    001-0004-819 rev01 page 9 of 62 smc-cdma module description top side reference fig. 2.1 smc-cdma top side smc-cdma top side components: 1. Power: green led indicating cell module power on. 2. Cdma: red led indicating cdma connection status. 3. Rf (antenna): mmcx socket, primary antenna connection. 4...

  • Page 10

    001-0004-819 rev01 page 10 of 62 bottom side reference fig. 2.2 smc-cdma bottom side smc-cdma bottom side socket pins: 1. Vcc/gnd pins 2. –reset/gnd pins 3. Primary serial uart pins figure 2.3 smc pins, top view 1 2 3 63 61 41 40 39 38 37 36 35 34 33 24 26 gnd vcc antenna -reset gnd gnd -dtr -dcd -c...

  • Page 11

    001-0004-819 rev01 page 11 of 62 pin descriptions pin # pin name i/o type description 24 -reset input this signal can be used to turn the c24 module on or off. If the unit is on, asserting a low for a minimum of 2 seconds will shut the c24 module off. Asserting a low for not more than 0.5 seconds wi...

  • Page 12

    001-0004-819 rev01 page 12 of 62 s s e e c c t t i i o o n n 4 4 - - d d e e v v e e l l o o p p m m e e n n t t / / t t e e s s t t b b o o a a r r d d i i n n t t e e r r f f a a c c e e development/test board the development/test board can be used to interface the scm-cdma modem to a standard rs2...

  • Page 13

    001-0004-819 rev01 page 13 of 62 smc-cdma test board components: 1. Smc-cdma modem 2. Mmcx to sma rf cable: provides connection to external antenna. 3. Rs-232 port: standard d-sub, 9 pin, female connector. 4. Power connector: molex 4-pos 3mm receptacle (lower left: gnd, lower right: +vdc). 5. Blue l...

  • Page 14

    001-0004-819 rev01 page 14 of 62 s s e e c c t t i i o o n n 5 5 - - g g e e t t t t i i n n g g s s t t a a r r t t e e d d u u s s i i n n g g t t h h e e s s m m c c t t e e s s t t b b o o a a r r d d this section describes the use of the smc test board to communicate with the smc modem for prov...

  • Page 15

    001-0004-819 rev01 page 15 of 62 verify smc modem connectivity power on the smc test board (+12vdc typical), then start hyperterminal. Figure 5.2 hyperterminal screen responses the ati command prints the cell module product information. If you get an error or no communication, verify the modem is co...

  • Page 16

    001-0004-819 rev01 page 16 of 62 s s e e c c t t i i o o n n 6 6 - - s s m m c c - - c c d d m m a a p p r r o o v v i i s s i i o o n n i i n n g g oma-dm sprint sprint provides customer functionality and miscellaneous services that will utilize "server-initiated" oma dm sessions. These services in...

  • Page 17

    001-0004-819 rev01 page 17 of 62 verify activation using hyperterminal with the provisioned smc-cdma modem installed, power on the smc test board (+12vdc typical) and start hyperterminal as described in section 5. Type the at+mipcall=1 command to start a ppp connection with the carrier network. If t...

  • Page 18

    001-0004-819 rev01 page 18 of 62 verify activation using a dial-up-network connection a windows dial-up network connection can be used to verify carrier activation on the network. Create a dial-up network connection using a standard modem set to 115200 bps. Go to the network connections screen and d...

  • Page 19

    001-0004-819 rev01 page 19 of 62 the modem will attempt to connect to the provider network. If the configured baud rate for the com port, the modem, and the dun do not match, the dun will not be able to talk to the modem properly and you will get a hardware error message. Otherwise the dun will cont...

  • Page 20

    001-0004-819 rev01 page 20 of 62 right click on the connected dial-up connection icon and select the details tab. The status of the connection will be displayed, including the ip address assigned by the carrier network..

  • Page 21

    001-0004-819 rev01 page 21 of 62 s s e e c c t t i i o o n n 7 7 - - s s m m c c - - c c d d m m a a o o p p e e r r a a t t i i o o n n a a l l f f e e a a t t u u r r e e s s this section provides information on various features and call scienerios using the smc-cdma modem with the smc development...

  • Page 22

    001-0004-819 rev01 page 22 of 62 circuit switched data (csd) data transfer over circuit switched data (csd) is possible. Once the connection is established, data can be transferred to and from the remote side. Csd operation enables the terminal to perform a data transfer over a circuit switched link...

  • Page 23

    001-0004-819 rev01 page 23 of 62 short message service (sms) the sms feature provides means for sms messages handling and the reporting of sms reception events. The smc modem sms implementation is based on the 3gpp 23.040 specification. The sms, as defined within the gsm 800/1900 digital mobile phon...

  • Page 24

    001-0004-819 rev01 page 24 of 62 fax the smc modem supports fax service class 2.0. A service class 2.0 facsimile provides a level of services necessary to support group 3 facsimile operation. This requires support from the facsimile terminal to implement the recommended t.30/t.32 procedures for docu...

  • Page 25

    001-0004-819 rev01 page 25 of 62 internet services the modem has an embedded tcp/ip stack that is driven by at commands and enables the host application to easily access the internet. The advantage of this solution is that it eliminates the need for the application manufacturer to implement their ow...

  • Page 26

    001-0004-819 rev01 page 26 of 62 3. After connecting to the cdma 1x network, the "server" sends its ip address to the smc modem using an alternative connection (for example, csd, sms and so on). 4. The server application listens on a known port, waiting for smc modem to connect. 5. The smc modem con...

  • Page 27

    001-0004-819 rev01 page 27 of 62 5. Sending (accumulating) data is done using the +mipsend command. 6. Actual send is done using the +mippush command, by specifying the ip address and port number of the destination. Note: every +mippush sets the destination ip address and destination port number for...

  • Page 28

    001-0004-819 rev01 page 28 of 62 each socket, opened in online data mode, allocates an accumulating buffer whose size is 1372 bytes. When the user sends amount of data, less then the buffer size, the data is being sent to network after a spooling timeout (200 ms), otherwise the data is being sent to...

  • Page 29

    001-0004-819 rev01 page 29 of 62 ftp connection smc modem implements ftp connection feature, based on rfc959 standard, and operates as a ftp client. When connected to a remote ftp server, smc modem is able to receive information about remote file system, manage it and perform files transfer operatio...

  • Page 30

    001-0004-819 rev01 page 30 of 62 the file transfer operation allows the user to transfer a file over an established ftp connection. To avoid end-of-file detection problem for user in download case and for smc modem in upload case, smc modem implements a special format of transferred files over ftp c...

  • Page 31

    001-0004-819 rev01 page 31 of 62 mux operation the smc modem cell module is supplied with an internal 3gpp 27.10 protocol stack, also referred to as a multiplexer or mux. The smc modem with multiplexer support utility provides the following capabilities: provides the terminal with up to five virtual...

  • Page 32

    001-0004-819 rev01 page 32 of 62 s s e e c c t t i i o o n n 8 8 - - s s m m c c m m o o d d e e m m m m o o d d u u l l e e p p r r o o f f i i l l e e s s in addition to the default profile, you can store an individual one with at&w. To alternate between the two profiles enter either atz (loads us...

  • Page 33

    001-0004-819 rev01 page 33 of 62 s s e e c c t t i i o o n n 9 9 - - c c o o r r e e a a t t c c o o m m m m a a n n d d r r e e f f e e r r e e n n c c e e g g u u i i d d e e the smc modem responds to limited commands set when the phone is locked. These commands are referred to as the "core at com...

  • Page 34

    001-0004-819 rev01 page 34 of 62 command description at+gmm this command displays the model identification. At+gmr this command displays the revision identification. At+goi device identification. At+gsn this command requests the product serial number identification in hex format. At+icf this command...

  • Page 35

    001-0004-819 rev01 page 35 of 62 s s e e c c t t i i o o n n 1 1 0 0 - - a a t t c c o o m m m m a a n n d d r r e e f f e e r r e e n n c c e e all modem functions are controlled using the same industry-standard at commands that are used to control landline modems. A knowledge of all these commands...

  • Page 36

    001-0004-819 rev01 page 36 of 62 result codes after issuing a command, a result code will typically be displayed on the screen to inform you if the command was successful, unsuccessful, improperly formatted, etc. When in the command mode, thirteen possible result codes may be returned. The result co...

  • Page 37

    001-0004-819 rev01 page 37 of 62 hardware information commands the at commands described in this section allow the external application to obtain various hardware information from the modems cellular module. Table 10.4: hardware information commands command description at+gcap this command displays ...

  • Page 38

    001-0004-819 rev01 page 38 of 62 table 10.6: nam programming commands commands description at+mnam this command gets or sets the nam parameters (parameters 1-12 out of 35). At+mnam2 this command gets or sets the nam parameters (parameters 13-22 out of 35). At+mnam3 this command gets or sets the nam ...

  • Page 39

    001-0004-819 rev01 page 39 of 62 prl and pri commands the preferred roaming list (prl) is a database residing in a wireless (primarily cdma) device, such as a cellphone, that contains information used during the system selection and acquisition process. In the case of ruim-based cdma devices, the pr...

  • Page 40

    001-0004-819 rev01 page 40 of 62 call control commands the at commands described in this section are related to mobile originated (moc, i.E. Outgoing) calls and mobile terminated (mtc, i.E. Incoming) calls. Table 10.12: call control commands command description atd this command places a voice call o...

  • Page 41

    001-0004-819 rev01 page 41 of 62 short message service (sms) commands the at commands described in this section allow an external application to use the short message service with the modem. Table 10.13: sms command reference command description at+csms this command handles the selection of the sms ...

  • Page 42

    001-0004-819 rev01 page 42 of 62 network related & user interface commands the at commands in this section aply to various network and user interface functions and parameters. For futher information, refer to the motorola c24 at command set document available from motorola [1]. Table 10.14: network ...

  • Page 43

    001-0004-819 rev01 page 43 of 62 tcp/udp ip commands a brief description of the tcp/udp ip commands. For futher information, refer to the motorola c24 at command set document available from motorola [1]. Table 10.16: tcp/udp ip commands command description at+mipcall this command creates a wireless ...

  • Page 44

    001-0004-819 rev01 page 44 of 62 ftp commands a brief description of the ftp (file transfer protocal) commands. For futher information, refer to the motorola c24 at command set document available from motorola [1]. Table 10.17: ftp commands command description at+ftpopen this command causes smc mode...

  • Page 45

    001-0004-819 rev01 page 45 of 62 gps - lbs commands a brief description of the gps commands. Commands in this section may require the use of the second serial uart test pins. For futher information, refer to the motorola c24 at command set document available from motorola [1]. Table 10.18: motorola ...

  • Page 46

    001-0004-819 rev01 page 46 of 62 fota commands a brief description of the fota (firmware update over the air) commands. For futher information, refer to the motorola c24 at command set document available from motorola [1]. Table 10.20: fota commands command description at+mfotacnfg this command enab...

  • Page 47

    001-0004-819 rev01 page 47 of 62 s s e e c c t t i i o o n n 1 1 1 1 - - s s p p e e c c i i f f i i c c a a t t i i o o n n s s product specifications are subject to change without notice. General specifications interface connectors: universal socket connectivity led indicators: power & cdma connec...

  • Page 48

    001-0004-819 rev01 page 48 of 62 mechanical specifications the following section describes in detail the exterior dimensions of the smc-cdma. All of the drawings below are the approximate actual size. The drawings may be used as layout reference, but it is advised that a physical comparison be made ...

  • Page 49

    001-0004-819 rev01 page 49 of 62 s s e e c c t t i i o o n n 1 1 2 2 - - s s e e r r v v i i c c e e a a n n d d s s u u p p p p o o r r t t product warranty, rma and contact information calamp guarantees that every smc-cdma cellular modem will be free from physical defects in material and workmansh...

  • Page 50

    001-0004-819 rev01 page 50 of 62 a a p p p p e e n n d d i i x x a a – – c c r r e e a a t t i i n n g g a a d d i i a a l l - - u u p p n n e e t t w w o o r r k k i i n n g g c c o o n n n n e e c c t t i i o o n n windows xp add standard windows modem.

  • Page 51

    001-0004-819 rev01 page 51 of 62.

  • Page 52

    001-0004-819 rev01 page 52 of 62.

  • Page 53

    001-0004-819 rev01 page 53 of 62.

  • Page 54

    001-0004-819 rev01 page 54 of 62 configuring the modem.

  • Page 55

    001-0004-819 rev01 page 55 of 62 create a dial-up networking (dun) connection.

  • Page 56

    001-0004-819 rev01 page 56 of 62.

  • Page 57

    001-0004-819 rev01 page 57 of 62.

  • Page 58

    001-0004-819 rev01 page 58 of 62.

  • Page 59

    001-0004-819 rev01 page 59 of 62.

  • Page 60

    001-0004-819 rev01 page 60 of 62.

  • Page 61

    001-0004-819 rev01 page 61 of 62.

  • Page 62

    001-0004-819 rev01 page 62 of 62 a a p p p p e e n n d d i i x x b b – – w w a a r r r r a a n n t t y y s s t t a a t t e e m m e e n n t t calamp warrants to the original purchaser for use ("buyer") that data telemetry products manufactured by drl ("products") are free from defects in material and...