1. DL manuals
  2. Landis & Gyr
  3. Measuring Instruments
  4. E350 Series 2
  5. User manual

Landis & Gyr E350 Series 2 User manual

Manual is about: Electricity Meter 1-phase

Summary of E350 Series 2

  • Page 1

    Electricity meters iec/mid residential zcf100ax/cx e350 series 2, 1-phase user manual [status] - date: 20.12.2012 - file name: d000030875 e350 zcf100ax cx 1-ph series 2 user manual en p.Docx - © landis+gyr d000030875 en q.

  • Page 2: Revision History

    2/52 [status] revision history © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual revision history version date comments a - 19.01.2010 - first edition. - b - 05.05.2010 - new display list items, combined sum integrated in channel configuration (section 1.6); sw-version ...

  • Page 3: Table Of Contents

    Table of contents 3/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr table of contents revision history ................................................................................................................................... 2 table of contents .............

  • Page 4

    4/52 [status] table of contents © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5.2.11 energy efficiency items in the meter display ................................................................... 36 5.3 optical test output ............................................

  • Page 5: Introduction

    Description of unit 5/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr introduction the present manual applies to the following meter versions: single-phase two-wire network zcf100ac and zcf100ab for active energy (import and export) zcf100cc and zcf100cb for active...

  • Page 6: Description Of Unit

    6/52 description of unit © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 1 description of unit 1.1 general view fig. 1.1 general view of meter 1.2 purpose of use restrictions for meters with software versions m51 to m52: the meters may not be used in networks with sig...

  • Page 7

    Description of unit 7/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr with an amr module, the meters can also be used to record counting pulses of other physical media (e. G. Water or gas volumes) or to directly transmit values recorded by other measuring devices. ...

  • Page 8

    8/52 description of unit © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 1.4 characteristics the meters have the following characteristics: recording of active and reactive energy in all 4 quadrants (zcf100cx) or recording of active energy imported and exported (zcf10...

  • Page 9

    Description of unit 9/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 1.5 type designation 1 phase 2 wire network network type connection type zcf 1 additional functionality c a zcf meter with communication interface direct connection 1 accuracy class active energy...

  • Page 10

    10/52 description of unit © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 1.6 measuring principle 1.6.1 overview the main meter inputs are: phase connection (l1) and neutral for - energy measurement - power supply of the meter - plc communication with communication mo...

  • Page 11

    Description of unit 11/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 1.6.3 signal processing the meter records active and reactive energy and can distinguish between energy import and export in up to 6 rates (depending on configuration). Calibration data is store...

  • Page 12

    12/52 description of unit © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual a measured quantity can be assigned by parameterisation to each of the 8 available channels. The following table shows some of the most common measured quantities used: value obis direction quad...

  • Page 13

    Description of unit 13/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 1.9 disconnector the zxc100xb version of the e350 meter is equipped with a disconnector which is controlled via the communication module. Various functions can be implemented: disconnection if c...

  • Page 14: Safety

    14/52 safety © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 2 safety this section describes the safety information used in this manual, outlines the responsibilities and lists the safety instructions to be observed. 2.1 safety information attention is drawn to danger...

  • Page 15

    Safety 15/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 2.3 safety instructions the following safety instructions must be observed at all times: the meter connections must not be under voltage during installation or when opening. Contact with live parts is danger...

  • Page 16: Mechanical Description

    16/52 mechanical description © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 3 mechanical description 3.1 housing the internal construction of the meter will not be described here, as the meter is sealed after calibration and verification. 5 2 4 3 1 7 8 9 10 11 6 fig....

  • Page 17

    Mechanical description 17/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 3.2 faceplate the faceplate (laser marking on front cover) shows customer-specific meter information. Fig. 3.2 basic layout of faceplate 1 meter data 2 approval symbol, ce conformity symbol 3...

  • Page 18

    18/52 mechanical description © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 3.4 dimensions the meter is only available with an extended terminal cover (see fig. 3.5). Fig. 3.5 meter dimensions the extended terminal cover offers increased safety since the phase and ne...

  • Page 19

    Mechanical description 19/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr terminals are available with an opening diameter of 8.5 mm and 9.5 mm. Terminals with opening diameter of 8.5 mm and 9.5 mm have the same position on the terminal block. Fig. 3.7 terminal lay...

  • Page 20: Installation/uninstallation

    20/52 installation/uninstallation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 4 installation/uninstallation 4.1 mounting the meter the meter should be mounted as follows on the meter board or similar device provided for this purpose (see also section 3.4 "dimensio...

  • Page 21

    Installation/uninstallation 21/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 4.2 connecting the meter remove main fuses before connecting the connecting wires at the place of installation must not be live when fitting the meter. Touching live parts is dangerous t...

  • Page 22

    22/52 installation/uninstallation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual insufficiently tightened screws insufficiently tightened screws of the connections can lead to increased power losses at the terminals and therefore to undesirable heating. A contact res...

  • Page 23

    Installation/uninstallation 23/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 4.5 disconnecting the meter remove main fuses before disconnecting the connecting wires at the place of installation must not be live when removing the meter. Touching live parts is dang...

  • Page 24: Operation

    24/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5 operation 5.1 control elements e350 meters have a display button on the front cover and a disconnector button on the terminal cover, if the meter is equipped with a disconnector. Data acquisition is eit...

  • Page 25: Va K

    Operation 25/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 5.2 liquid crystal display (lcd) 5.2.1 basic layout the basic layout shows all indication possibilities of the lcd. 1 2 3 2 4 3 5 6 7 8 9 10 11 12 +q +p -q -p l 1 va k arh gj mj m 3 fig. 5.3 basic layout ...

  • Page 26

    26/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual +q positive reactive energy direction - -q negative reactive energy direction indicates in which quadrant the present measurement is made: +q +p 1 st quadrant -q -p 3 rd quadrant +q -p - 2 nd quadrant - +...

  • Page 27

    Operation 27/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr the 6 arrow symbols indicate the active rate as marked on the faceplate. It can be parameterised whether the arrow symbol for the active rate is on or flashing. Up to 5-digit indices that define the value...

  • Page 28

    28/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5.2.4 display definitions the meter can show various displays. Here are some examples. Note the number of digits and decimal places displayed can be parameterised (also whether leading zeros are to be dis...

  • Page 29

    Operation 29/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 5.2.5 display sequence the previous section showed in detail the possible displays. The display sequences shown on any specific customer’s product are set through parameterisation at the factory. There ar...

  • Page 30

    30/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual during power up the type and software version of the meter is displayed for 10 seconds. The display contains: in the main field, "100" and the characters to define whether it is an active or a combimeter ...

  • Page 31

    Operation 31/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr exiting the service mode depends on how you entered: long button press – exit at the end of list. Terminal cover removal – exit when the cover replaced. Power up – exit after a time period. The number of ...

  • Page 32

    32/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual +p +q l 1 k h +p +q l 1 k arh -p +p -q +q l 1 l 2 l 3 v k gj mj m 3 a arh +p +q l 1 k h +p +q l 1 k arh etc. The meter first shows the total active energy import register as 00123.4 kwh, followed by the r...

  • Page 33

    Operation 33/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 5.2.8 text messages on display it is possible for the module to show information on the meter display. Pos- sible items include ids of connected devices, time. For this, the value and the index fields can...

  • Page 34

    34/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5.2.9 meter display list – available items with obis codes index value (obis code) item meter software version f.F - error code (always first in the list) - c.1.0 - meter identification (8 character strin...

  • Page 35

    Operation 35/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr index value (obis code) item meter software version - 6.8.0 - reactive energy q2 - 7.8.0 - reactive energy q3 - 8.8.0 - reactive energy q4 - 9.8.0 - apparent energy {+kvah} (q1+q4) - 10.8.0 - apparent ene...

  • Page 36

    36/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5.2.11 energy efficiency items in the meter display if configured appropriately the display can list 4 new (software ≥ m52) items intended to allow the consumer to easily monitor energy flow: item display...

  • Page 37

    Operation 37/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 5.3 optical test output the test diode is used for meter testing. It transmits visible red pulses equi- valent to the currently measured value. The switching between active and reactive mode in combimeter...

  • Page 38

    38/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5.5 data readout the power supplier can read the meter data, particularly the energy con- sumption, locally in two ways: reading the meter’s lcd. Only the data shown in the display list can be recorded. A...

  • Page 39

    Operation 39/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr valid for readout with e35c modules! For other modules, other codes may be delivered, e.G. Equal to error display values . 5.5.3 readout status code (c.5.0) the e350 devices feature along with universal d...

  • Page 40

    40/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual the status register is available to be read via communication (public or optical) or displayed on lcd in hexadecimal form. Some meter configurations also contain a special code, which is 4 bytes long. All...

  • Page 41

    Operation 41/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 5.5.5 data readout procedure via optical interface or amr module 1. Start the amr module (according to the associated user manuals). 2. Connect the cable of the reader head to the hand held terminal. 3. P...

  • Page 42

    42/52 operation © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 5.5.6 addressability of meter the meter monitors every communication request received over the optical port or the amr-interface. The amr-interface can be controlled by various inputs from the module (e.G...

  • Page 43: Service

    Service 43/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 6 service 6.1 operating faults if the lcd is not readable or the data readout does not work, the following points should be checked first: 1. Is the mains voltage present (main fuse intact)? 2. Is the maxim...

  • Page 44

    44/52 service © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual example: two errors are shown as: f.F 00002001 another two errors occur: - f.F 00028000 - the displayed error code reads: - f.F 0002a001 error code 1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8 1 ...

  • Page 45

    Service 45/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr byte bit valency error code error code description - 3 - 0 1 - – - not used - 1 2 - 00 02 00 00 - error accessing eeprom - 2 4 - – - not used - 3 8 - 00 08 00 00 - reserved - 4 1 - – - not used - 5 2 - 00 2...

  • Page 46: Maintenance

    46/52 maintenance © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 7 maintenance the meter is maintenance-free. The following points should be regularly checked: is the meter dry and clean (particularly display and optical interface)? Is the meter in operation and serv...

  • Page 47

    Maintenance 47/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr for meters with software version m54: if the so called register test (test of the meter constant or the gear transmission error) is carried out not at a constant load point, but with a constant injected...

  • Page 48

    48/52 maintenance © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 3. After testing, remove the cable (voltage-free!) from the terminal cover. The spring closes the contact and the voltage is connected again. Insert the access lock sliding piece again, if necessary, an...

  • Page 49

    Decommissioning and disposal 49/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr 8 decommissioning and disposal this section explains the disconnection of the meter from the system and its correct disposal. 8.1 decommissioning the procedure for disconnecting and rem...

  • Page 50

    50/52 annex: declaration of conformity © landis+gyr d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual 9 annex: declaration of conformity.

  • Page 51

    Annex: declaration of conformity 51/52 d000030875 en q – e350 series 2, 1-phase zcf100ax/cx – user manual © landis+gyr.

  • Page 52

    Contact: landis+gyr ag theilerstrasse 1 ch-6301 zug switzerland phone: +41 41 935 6000 www.Landisgyr.Com.