Landmann 28254 Assembly Instructions - Pawn Chiminea
Assembly Instructions:
You will need these tools for assembly:
Medium phillips or flathead screw driver, pliers or small adjustable wrench.
Step 1
Place fire bowl (H) on its side and attach the three legs (L) with
six M6 x 28 bolts, lock washers and nuts. Tighten bolts
securely.
Step 2
Attach three connector plates (G) to the fire bowl bottom with
three M6 x 20 bolts, lock washers and nuts.
Step 3
Attach the top (F) to the fire bowl and connector plates with
three M6 x 20 bolts, lock washers and nuts.
Step 4
Attach poker hanger (D) on the right side of the top using a lock
washer and nut.
Step 5
Assemble chimney (C) to the top using three M6 x 20 bolts,
lock washers and nuts.
Step 6
Insert grate (J) inside the fire bowl.
Step 7
Place the spark arrestor (B) and cap (A) on the chimney.
Step 8
Attach the door hook (M) using one M6 x 20 bolt, lock washer
and nut. Place the spark screen (K) on the hook.
Step 9
Make sure all bolts are securely tighened.
Step 10 Enjoy!
Maintenance:
The Pawn Chiminea may be cleaned with water and mild detergent.
Periodic maintenance is required to return painted cast iron surfaces to
original appearance. Remove any rust with sandpaper or steel brush.
Repaint with grill paint for high temperature surfaces. Follow paint
manufacturerʼs instructions.
Parts and Quantities:
PAGE 2
PAWN CHIMINEA
Model 28254
®
If you have any questions or need
assistance, please contact us at:
1-800-321-3473 or at
customerservice@landmann-usa.com
PART DESCRIPTION
QTY
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
CAP
SPARK ARRESTOR
CHIMNEY
POKER HANGER
POKER
TOP
CONNECTOR PLATES
FIRE BOWL
GRATE
SPARK SCREEN
LEGS
DOOR HOOK
M6 x 20 BOLT
M6 x 28 BOLT
LOCK WASHER
WASHER
M6 NUT
1
1
1
1
1
1
3
1
1
1
3
1
10
6
16
16
17
1
2
3
4
5
6
7
8