Landmann 28925 Assembly Instructions

Summary of 28925

  • Page 1

    Please read all rules for safe operation before assembly and helpful hints before use. Assembly instructions congratulations on your purchase of the ball 'o fire! At landmann usa, we strive to provide you with an easy to use, easy to assemble product. However, in the unlikely event your package shou...

  • Page 2: Ball 'O Fire

    Parts list: when unpacking the ball 'o fire from the carton, make sure you find and become familiar with all the pieces listed below: ver. 1, 8/22/07 c (3) legs p (28) 13mm bolts (1) cover (1) center ring e f g a b (3) bottom screen sections (3) bottom screen sections (1) left fixed top section (1) ...

  • Page 3: Ball 'O Fire

    Step 2 assemble (1) pc screen section [a] to the screens using (2) 13mm bolts, (1) 25mm bolt and (3) hexnuts as shown. Assemble the 25mm bolt where shown. Only finger tighten at this time. Step 4 assemble the (3) legs [d] to the screen bowl using (6) hexnuts. Securely tighten the bolts. Step 3 follo...

  • Page 4: Ball 'O Fire

    • adding sand to the bottom of firebowl helps protect against the corrosive nature of the ashes and will extend the life of the firebowl. • if you are not going to use the ball 'o fire for a long period of time, store away out of the weather or use the cover to keep dry. • do not let firebowl fill w...