Assembler / installer: leave these instructions with the consumer. Consumer / user: this instruction manual contains important information necessary for the proper assembly and safe use of this appliance. Read and follow all warnings and instructions before assembling and using this appliance. Follo...
Statement of commitment congratulations and thank you for your purchase of our great outdoors smoky mountain smoker. We are pleased tht you have recognized the value of the design, function and quality of components used in the product. We are committed to producing quality products that your family...
Do not use this smoker in a manner other than its intended purpose. It is not intended for commercial use. It is not intended to be installed or used in or on a recreational vehicle and/or boats. The smoker is not be used as a heater. Keep a fire extinguisher accessible at all times. The use of alco...
Use caution when operating the door while in operation. Keep hands, face and body safe from hot steam or flare ups. Do not wear loose clothing while operating the smoker. Tie back long hair while operating the smoker. Always wear fully-covering shoes while operating the smoker. Allow the smoker and ...
Assembly step 1 - identifying the parts check your contents for these parts. If you are missing any parts or if any parts are damaged, please call our toll-free customer service line to order parts: 1-800-321-3473 do not return your smoker to the retailer. Please call us first. 5 az002118 door panel...
6 assembly step 1 - continued check your contents for these parts. If you are missing any parts or if any parts are damaged, please call our toll-free customer service line to order parts: 1-800-321-3473 do not return your smoker to the retailer. Please call us first. 3815gla/3895gla/3875glac/3875gl...
7 3815gwla/3895gwla/3875gwlac/3875gwlacr vertical gas smoker az002122 side handle az002129 damper vent with plastic tip guard az002053 burner assembly wood chip box az002123/az002124 wood chip box with lid assembly step 1 - identifying the parts check your contents for these parts. If you are missin...
8 assembly step 1 - continued check your contents for these parts. If you are missing any parts or if any parts are damaged, please call our toll-free customer service line to order parts: 1-800-321-3473 do not return your smoker to the retailer. Please call us first. 3815gwla/3895gwla/3875gwlac/387...
9 #8 wrench vent damper plate with plastic tab guard 5.5mm lock washer 2 required m5x15 bolt 2 required m5 nut 2 required assembly step 2 phillips head screwdriver note that the metal tab that goes inside the “butterfly” holes is specifically designed to keep these vent partially open at all times. ...
10 . 1. For each leg, line up the holes and insert the bolts. Nuts are pre-welded to the cabinet. The back legs bolts should be inserted and securely tightened. For the front leg bolts, insert and adjust 1 bolts per leg (as shown) 1/2 way. Important: there are two legs that contains an extra hole mu...
11 m5x10 bolt 2 required m6x15 bolt 2 remaining bolts from step 2 assembly step 4 phillips head screwdriver hardware bag b 1. Place the control panel assembly between the front legs as shown. Insert the two (2) remaining bolts 1/2 way. Do not tighten them until the next step has been finished. 2. Al...
12 m6x12 bolt 3 required proper igniter wire connection assembly step 5 phillips head screwdriver proper fit between burner and brass valve stem 1. Set the burner assembly onto the cabinet as shown. Important: the burner tube must slide properly onto the brass valve stem as shown below. An improper ...
Phillips head screwdriver meat hanger adjustable chimney cabinet top assembly step 6 meat hanger 1. Turn the smoker upright. Ideally, it needs 2 people to lift the smoker up. Carefully tilt the cabinet on the side legs, grasp the empty hole for the adjustable chimney and pull up gently until smoker ...
14 hardware bag f 1. Align the side carry handle with the corresponding holes on the side of the cabinet. Then handles must be positioned upright with the bolt holes on the bottom. 2. Insert the bolts from the outside and the thread the lock washers and nuts from the inside of the cabinet. 3. Secure...
15 water pan drawer with nylon plastic handle wood chip box drawer with nylon plastic handle 1. Align the drawer handle bracket holes to match the holes in the front panel of the drawers. 2. Insert the bolts from the outside and the thread to the lock washers and nuts from the inside of the drawers....
Cooking racks assembly step 9 note: no tools or hardware are required for this step. 1. Insert cooking grids into available rack positions and grease pan as shown. 2. Place lid on the wood chip box and position complete wood chip box on drawer frame as shown. Slide wood chip box drawer into cabinet....
17 hardware bag h 1. Align the door handle with the corresponding holes on the front of the cabinet door. 2. Insert the bolt through hole in door handle bracket and then thread the lock washers and nuts from the inside of the door.. 3. Securely tighten the nuts using both screwdriver and wrench. Ass...
18 hardware box i name-plate temperature gauge note: no tools or hardware are required for this step. 1. Insert the temperture gauge mounting pins through the mounting holes in the front of the door panel. 2. From the inside of the door, securely attach flat washer and wingnut to each mounting pin. ...
19 hardware bag j assembly step 12 insert the r-hook into the pre-threaded mount on the front legs as shown. And firmly tighten it. Using the zip tie, secure the hose to the front leg as shown. Do not pull the zip tie tight - leave it just lose enought so the hose can be adjusted if needed. Tying th...
The instructions stated on the lp cylin- ders have to be followed whe filling and transporting cylinders. Failure to do so could result in problems relating to overfill- ing, excessive venting of gas and to regula- tor freezing. (a) do not store tanks under or near the smoker. (b) never fill cylinde...
Valve/pressure regulators are factory set to the correct operating pressures. No attempts should be made to adjust these settings. Connecting the lp gas cylinder: 1. The valve on the lp cylinder must be closed. See that the knob is turned clockwise to a full stop. 2. Check that the control knob on t...
Pre-use procedures: before you cook food in our smoker, it is important to “season” your smoker. Seasoning seals the paint and interior of your smoker to enhance flavoring, durability and overall peformance. This is also referred to as the “break-in” process. If your smoker requires any touch-up pai...
To add wood chips before smoking, fill the wood chip box with your choice of flavoring hardwood chips. The amount and type of wood you use is entirely up to you. One full filling of the wood chip box is typically enough for several hours of smoking. Once the wood chip box is filled, place the lid on...
24 lighting procedures: igniter lighting system: 1. Check all connections for leaks using the “soapy water” test as explained on page 21. 2. Open the smoker cabinet door. 3. Check for any blockage to the venturi tube or burner. Remove any foreign objects or matter. 4. Be sure the burner control knob...
25 cooking instructions: important: before each use, clean and inspect the hose and the connection to the lp cylinder. If there is evidence fo abrasion, wear, cuts or leaks, the hose must be replaced before the smoker is used. Refer to the “leak test instructions” in the lp cylinder portion on this ...
Here is a chart for measuring properly cooked meat temperature: (usda standard) the below temperatures are measured with a meat probe thermometer. The heat indicator on the door of the smoker should not be used as an accurate meat temperature reading. Cauton ground meats & meat mixtures: turkey 165°...
Use caution when lifting or moving the smoker to avoid strains or back injury. Two (2) people are recommended to lift or move the smoker. Do not place cover on smoker if the smoker is still hot. Do not store the smoker near gasoline or other combustible liquids or where combustible vapors may be pre...
After use care and maintenance caution: all care and maintenance procedures are to be performed only while the smoker is turned off and completely cooled. To clean, remove the water pan, wood chip box and cooking racks from the smoker. Clean with hot, soapy water and rinse and dry thoroughly. You ma...
29.
