Summary of CD640
Page 1
Laney series mixer amps user manual model : cd640 cd850s.
Page 2
Important safety instructions warning: when using electric products, basic cautions should always be followed, including the following. 1. Read all safety and operating instructions before using this product 2. All safety and operating instructions should be retained for future reference 3. Obey all...
Page 3
Concept cd640 cd850s manual we at laney are extremely pleased that you have decided to select a concept product for your sound requirements and we wish to reinforce your judgement by ensuring you get off to a flying start by including this comprehensive user manual to assist you in getting to know y...
Page 4
Front panel features: concept cd850s line line line line1 footswitch line2 line vocal large hall small hall on digital effects level level level pad pad pad pad level level fx out fx fx fx fx fx mon mon mon mon mon bass bass bass bass bass mid mid mid mid mid treb treb treb treb treb mic mic mic mic...
Page 5
3 4 5 9 2 1 line level pad fx mon bass mid treb mic 2 2 4 4 4 4 2 2 1 1 1 1 5 5 3 3 3 3 5 5 - 0 + - 0 + 2 2 4 4 4 4 2 2 1 1 1 1 5 5 3 3 3 3 5 5 - 0 + - 0 + 2 2 4 4 4 4 2 2 1 1 1 1 5 5 3 3 3 3 5 5 - 0 + - 0 + 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 ...
Page 6
Concept line level fx mon bass mid treb mic 2 2 4 4 4 4 2 2 1 1 1 1 5 5 3 3 3 3 5 5 - 0 + - 0 + 2 2 4 4 4 4 2 2 1 1 1 1 5 5 3 3 3 3 5 5 - 0 + - 0 + 2 2 4 4 4 4 2 2 1 1 1 1 5 5 3 3 3 3 5 5 - 0 + - 0 + 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 7 7 1 1 ...
Page 7
Cd640 features - dsp footswitch vocal large hall small hall on digital effects fx out fx out fx fx 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 11 12 17 13 14 15 16 vocal: selects the vocal effect from the onboard dsp. To any channel with an fx setting of more than zero. Overall level of vocal dsp ...
Page 8
Fx return aux in tape in master volume aux in main out rec out tape in 60hz 60hz 160hz 160hz 400hz 400hz 1khz 1khz 6khz 6khz 2.5khz 2.5khz 16khz 16khz 0db 0db -15 -15 +15 +15 0db 0 0 -5 -5 -10 -10 -18 -18 +3 +3 power phantom 48v power amp mode on main main bridged limiter active main off main monito...
Page 9
Monitor eq: 7 band graphic equalizer, for the ‘monitor/main’ section of the amplifier. This also acts as eq for the line level ‘monitor’ output socket. Fx return: controls the overall effects level of the on board dsp present in the monitor signal. Main eq: 7 band graphic equalizer, for the ‘main’ s...
Page 10
Power switch: activates the unit. Monitor out: this socket should be used to connect an unpowered monitor when the amp mode switch is set to main/monitor. Total monitor impedance must not be lower than 4 ohms. Bridged: socket for connecting speakers when the amp mode switch is set to bridged mode. T...
Page 11
Features cd850s 3 4 5 33 2 1 concept cd850s features - channels 1 - 6 treble: adjusts the high frequency response of the individual channel. Mid: adjusts the mid range frequency response of the individual channel. Bass: adjusts the low frequency response of the individual channel. Mon: controls the ...
Page 12
Features cd850s 3 4 5 35 2 1 concept cd850s features - channels 7/8 - 9/10 treble: adjusts the high frequency response of the individual channel. Mid: adjusts the mid range frequency response of the individual channel. Bass: adjusts the low frequency response of the individual channel. Mon: controls...
Page 13: Cd850S P
Concept left send right send monitor left return right return aux in (stereo) left master right master 60hz 160hz 400hz 1khz 6khz 2.5khz 16khz 0db +15 0db +15 right eq 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 7 7 1 1 9 9 3 3 4 4 6 6 0 0 8 8 2 2 10 10 5 5 -15 -15 60hz 160hz 400hz 1khz 6khz 2.5kh...
Page 14
Features cd850s 42 43 concept left return: socket provided for connecting the return signal from an external device connected to the left send. Aux in: stereo aux socket. Monitor out: line level signal provided for connecting to an external powered monitor or connecting to an external power amplier ...
Page 15
51 tape in: dual phono, line level input sockets, ideal for connecting an external tape machine, cd player, etc. To the amplifier. Tape out:dual phono, line level output sockets, ideal for connecting an external recording device. Fx return: stereo socket for output of external effects processing dev...
Page 16
Phantom power switch: activates phantom power. Mains socket: connects unit to mains power supply. Left speaker outs: jack sockets for conecting speaker cabinets. Multiple cabinets maybe connected to each side of the mixer amplifer but the minimum impedance must not be lower than 4 ohms. Left speakon...
Page 17
Blt industries ltd., newlyn road, cradley heath, west midlands. B64 6be. Tel: (0044) (0)1384 633821 fax: (0044) (0)1384 639186 web site: http://www.Laney.Co.Uk in the interest of continued product development blt industries ltd. Reserves the right to amend product specification without prior notific...