Laney CM10 User Manual - page 7
BLT Industries Ltd.,
Newlyn Road,
Cradley Heath,
West Midlands.
B64 6BE.
Tel: (0044) (0)1384 633821
Fax: (0044) (0)1384 639186
Web site: http://www.laney.co.uk
In the interest of continued product development BLT Industries Ltd. Reserves the
right to amend product specification without prior notification.
The Laney range of unpowered monitors, the CM10,CM12 & CM15 are designed to compliment
the CP range of products. Each CP monitor is capable of powering an unpowered monitor for
maximum power output and sound covereage.
Each CM monitor is supplied with an input jack and a link out jack. The input jack should be used
to recieve the signal from the External Speaker Socket on a CP10, CP12 or CP15, whilst the link out
jack should be used only when the monitors are being powered by a dedictaed monitor power
amplifier, for example when the mixing desk is sending a monitor signal to an additional power
amplifier.
Depending upon the specification of the power amplifier it may be possible to link together a
number of unpowered monitors to achieve the desired monitor spread. The impedance of each
unpowered monitor is 8 Ohms.
Concept
6
Unpowered Monitors