Laney HCM15B User Manual - page 3

Care of your Laney amplifier will prolong it's life.....and yours!. 

After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug.  

Before plugging into the power supply ensure you are connecting to a grounded earth outlet.

If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to 

the country where the amplifier is to be used is strictly conformed to.  As an example in the United Kingdom 

the cable colour code for connections are as follows

.

EARTH

OR

GROUND

-

GREEN/YELLOW

NEUTRAL

-

BLUE

LIVE

-

BROWN

Congratulations on your decision to purchase a Laney amplifier.

Laney products are designed with ease of operation as a primary objective, however to ensure you 

derive the best from your new amplifier, it is important you take time to read this user manual and to 

familiarise yourself with the control functions and facilities available

INTRODUCTION

BEFORE

SWITCHING ON

This manual has been written for easy access of information.  The front and rear panels of each unit 

are graphically illustrated, with each control and feature numbered.  For a description of the function of 

each control feature, simply check the number with the explanations adjacent to each panel.

Your Laney amplifier has undergone a thorough two stage, pre-delivery inspection, involving actual 

play testing, as well as burn in. 

When you first receive your Laney amp, follow these simple procedures:

 (I) Ensure that the amplifier is set at the correct voltage for the country it is to be used in.

(ii) Connect your instrument with a high quality instrument cable.  Use of cheap cables will compromise 

the sound of your instrument and your amplifier.

If there is a problem with your Laney amplifier                                                                  

DON'T

DO

PHONE YOUR DEALER!

Laney

1.

1