Langer No.7 Operating Instructions Manual - page 5
© langer audio
5
Setup and preparation the drive for use:
The assembly step by step:
1. Place the housing (A) at the space, where it should be used.
2. The stands of the drive are adjustable in height. Just turn the corresponding
stand clock/counterclock wise, to adjust for a non-flat surface.
3. Unlock the 3 integrated transport locks as follows:
Attention: The platter can only be installed, when the transport locks are
inactive!
4. Place Platter (C) carefully on motor axle and motor platter. The platter is not
fixed with screws. It lies just with its own weight on the motor platter.
Attention: The complete drive must not be moved with the platter
installed! The heavy platter can destroy the motor bearing in case of
shock during transport.
5. Place platter mat (D) on to the platter.
6. For installing a tonearm, refer to instructions of the tonearm manufacturer. As
an option, langer audio offers adaptor plates (G) for a huge variety of tonearm
brands. There are also raw adaptor plates available for adapting exotic
tonearm types.
GB