Instructions for outdoor hanging lantern, model lpt-1006 page 1.
Thank you for purchasing this langport lighting outdoor hanging lantern. This product has been manufactured with the highest standards of safety and quality. Features: • easy to install • solid cast aluminum resists elements. • for energy savings this fixture has been engineered to safely use a self...
Parts: remove fixture and mounting package from box and make sure that parts are are not missing by referencing illustrations below. (parts are not to scale.) mounting bracket mounting screws (2) nipple hex nuts (2) main fixture body screw collar loop canopy wire nuts (3) threaded ring ( ) chain (3 ...
Caution: • all electrical connections must be in accordance with local and national electrical code (n.E.C.) standards. If you are unfamiliar with proper electrical practices, obtain services of a qualified electrician. • turn off the main power at circuit breaker before installing fixture in order ...
3. Raise the chain and the main fixture body up to the outlet box to determine the desired length needed for installation. Identify the chain link that needs to be opened to remove the excess chain. Using two pair of pliers, open the chain link. R d di d th h i k th opened chain link (fig 2) assembl...
Outlet assembly and installation (cont.): mounting box mounting bracket mounting screws hex nut fig. 3 nipple screw collar loop nipple 7. Place the canopy over the outlet box and check if the midpoint of the outer threads of the screw collar loop aligns with the bottom surface of the canopy. Outlet ...
Chain assembly and installation (cont.): chain canopy fig. 5 threaded ring top loop 10. Hook the previously opened chain link onto the top link of the chain. Raise the opened chain link along with the chain and the main fixture body up to the g p ceiling and hook it onto the screw collar loop. Using...
Assembly and installation (cont.): 11. Feed the cord and fixture ground wire into the center hole of the screw collar loop, in through the nipple and out to its top end, then out of the outlet box. Continue feeding the cord and fixture ground wire, until th i l k i i (fig 7 & 8) there is no slack re...
Black (hot) assembly and installation (cont.): black (hot) supply wire wire supply ground wre ribbed wire smooth wire nut fixture ground ground screw 13. Slide the canopy up the chain, toward the outlet box, up against the ceiling surface slide the threaded ring up the chain and thread it onto the s...
Assembly and installation (cont.): 14. Install an incandescent light bulb or a listed sbcfl (self-ballasted compact fluorescent lamp [not provided]) into the socket of the main fixture body. Do not exceed a 100 watt incandescent light bulb, or a 26 watt sbcfl. (fig. 11) main fixture bocy fig. 11 lig...
Troubleshooting: 1. Power is off. 1. Make sure power supply is on. Lights will not turn on. Symptom possible cause corrective action 2. Faulty switch. 2. Test or replace switch. 3. Faulty wire connection. 3. Check wiring. Fuse blows or circuit breaker trips when light is turned on 1. Crossed wires o...
Page 12.
