1. DL manuals
  2. Lanner Electronics
  3. Firewall
  4. FW-7890 Series
  5. User Manual

Lanner Electronics FW-7890 Series User Manual

Manual is about: 19” 2U Intel Dual Xeron Rackmount Network Security Platform

Summary of FW-7890 Series

  • Page 1

    Fw-7890 series 19” 2u intel dual xeron rackmount network security platform user’s manual.

  • Page 2: Copyright and Disclaimers

    Ii copyright and disclaimers © copyright 2004 - lanner electronics inc. All rights reserved the contents in this publication have been thoroughly checked and considered accurate. The publisher and manufacturer of this product, lanner electronics, is not responsible for any violation of patents or ot...

  • Page 3

    Iii federal communications commission (fcc) statement this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is o...

  • Page 4: Safety Instructions

    Iv safety instructions the following information relates to the safety of installation and maintenance personnel. Read all instructions before attempting to unpack, install or operate this equipment, especially before connecting the power adapter. Please keep the following in mind as you unpack and ...

  • Page 5: About This Manual

    V getting technical assistance should you encounter questions or problems with your fw-7890, lanner electronics is ready to assist you within the guidelines of our product support programs. First, check the electronic product documentation for assistance. If you still cannot find the solution to you...

  • Page 6: Table of Contents

    Vi table of contents copyright and disclaimers....................................................................................................Ii trademark acknowledgments...............................................................................................Ii radio frequency emissions no...

  • Page 7

    Vii lcd module and key pad for fw-7890...........................................................................44 a p p e n d i x e...................................................................................................................44 lan bypass function ................................

  • Page 8: C H A P T E R  1

    1 c h a p t e r 1 getting started 1.1 introduction figure 1 – fw-7890 outlook the fw-7890 is a 2u rackmount network security solution targeting the enterprise market. The fw-7890 supports dual socket 604 for intel xeon processor with 800mhz fsb. It is designed with an intel e7520 as its northbridge ...

  • Page 9: 1.2 Technical

    2 1.2 technical specifications model name fw-7890a fw-7890b sbc sbc mb-x77a mb-x77b cpu dual intel ® xeon processor, up to 3.6g with 1m l2, 800 fsb, and hyper-threading technology with 64-bit extended memory chipset intel e7520 / intel 6300esb / winbond w83627hf security processor cavium cn1010 n/a ...

  • Page 10: 1.3 Packing

    3 1.3 packing contents carefully unpack your package and make sure that you have the following items. „ fw-7890 network security platform x 1 pcs „ console cable(rj-45) x 1 pcs „ 1.8 meters long cross-over ethernet cable x 1 pcs „ 1.8 meters long straight-through ethernet cable x 1 pcs „ face panel ...

  • Page 11: 1.4 Mb-X77

    4 1.4 mb-x77 system board mb-x77 is the system board bundled with the fw-7890 network security platform. The succeeding sections list all mb-x77 related jumper settings and connector pin assignments. 1.4.1 board layout figure 3 – mb-x77 jumpers and connectors pcixa1 fan3 fan1,2 pme1 cf1 ideb1 usbf1 ...

  • Page 12

    5 1.4.2 jumper settings and i/o connector the onboard jumper settings and i/o connector of mb-x77 are custom-tailored to fit the fw-7890 functionality. Changing the jumper settings may result in system malfunction or unforeseen damages. Jumper settings and i/o connector summary for mb-x77 jumper fun...

  • Page 13

    6 plrs1:power led,hd led,reset,speaker connector(11 pin 2.54mm) pin no. Description 1 power led + 2 power led + 3 gnd 4 hdd led + 5 hdd led - 6 reset sw + 7 reset sw – (gnd) 8 external speaker - 9 internal buzzer - 10 nc 11 external speaker + pkmb1:ps/2 keyboard & mouse connector (2x4 header 2.54mm ...

  • Page 14

    7 5 data 6 6 data 9 7 data 5 8 data 10 9 data 4 10 data 11 11 data 3 12 data 12 13 data 2 14 data 13 15 data 1 16 data 14 17 data 0 18 data 15 19 ground 20 key 21 dma req# 22 ground 23 iow # 24 ground 25 ior # 26 ground 27 iochrdy 28 ground 29 dma ack # 30 ground 31 interrupt 32 nc 33 sa1 34 pd80p /...

  • Page 15

    8 fan4~6 : 3 pin fan connector pin no. Description 1 ground 2 +12v 3 fan status cf1:compact flash connector pin description pin description 1 gnd 26 cd1- 2 data3 27 data11 3 data4 28 data12 4 data5 29 data13 5 data6 30 data14 6 data7 31 data15 7 ce1# 32 ce2# 8 a10 33 vs1# 9 oe# 34 ior# 10 a9 35 iow#...

  • Page 16

    9 comb1: serial port #2 connector ( header ) description pin no rs-232 1 data carrier detect (dcdb #) 2 data set ready (dsrb #) 3 receive data (rxdb) 4 request to send (rtsb #) 5 transmit data (txdb) 6 clear to send (ctsb #) 7 data terminal ready (dtrb #) 8 ring indicator (rib #) 9 ground 10 key lpt...

  • Page 17

    10 pin no. Description pin no. Description 1 +3.3v 13 +3.3v 2 +3.3v 14 -12v 3 ground 15 ground 4 +5v 16 pson- 5 ground 17 ground 6 +5v 18 ground 7 ground 19 ground 8 power good 20 nc 9 stand-by 5v 21 +5v 10 +12v 22 +5v 11 +12v 23 +5v 12 +3.3v 24 ground pcib1:124 pin mini pci socket pin no. Descripti...

  • Page 18

    11 25 clk 26 rst 27 ground 28 +3.3v 29 reo 30 gnt 31 +3.3v 32 ground 33 ad31 34 pme 35 ad29 36 reserved 37 ground 38 ad30 39 ad27 40 +3.3v 41 ad25 42 ad28 43 reserved 44 ad26 45 c_be-3 46 ad24 47 ad23 48 idsel 49 ground 50 ground 51 ad21 52 ad22 53 ad19 54 ad20 55 ground 56 par 57 ad17 58 ad18 59 c_...

  • Page 19

    12 91 ad5 92 ad4 93 reserved 94 ad2 95 ad3 96 ad0 97 +5v 98 reserved-wip 99 ad1 100 reserved-wip 101 ground 102 ground 103 ac_sync 104 m66en 105 ac_sdata_in 106 ac_sdata_out 107 ac_bit_clk 108 ac_codec_id0 109 ac_codec_id1 110 ac_reset 111 mod_audio_m 112 reserved 113 audio_gnd 114 ground 115 sys_au...

  • Page 20

    13 pcixa1: 184 pin 3v pcix socket pin side b side a comments 1 -12v trst# 32-bit connector start 2 tck +12v 3 ground tms 4 tdo tdi 5 +5v +5v 6 +5v inta# 7 intb# intc# 8 intd# +5v 9 prsnt1# reserved 10 reserved +3.3v（i/o） 11 prsnt2# reserved 12 connector key 3.3 volt key 13 connector key 3.3 volt key...

  • Page 21

    14 30 ad﹝19﹞ ground 31 +3.3v ad﹝18﹞ 32 ad﹝17﹞ ad﹝16﹞ 33 c/be﹝2﹞# +3.3v 34 ground frame# 35 irdy# ground 36 +3.3v trdy# 37 devsel# ground 38 ground stop# 39 lock# +3.3v 40 perr# reserved* 41 +3.3v reserved* 42 serr# ground 43 +3.3v par 44 c/be﹝1﹞# ad﹝15﹞ 45 ad﹝14﹞ +3.3v 46 ground ad﹝13﹞ 47 ad﹝12﹞ ad﹝...

  • Page 22

    15 connector key 64-bit spacer 63 reserved ground 64-bit spacer 64 ground c/be﹝7﹞# 65 c/be﹝6﹞# c/be﹝5﹞# 66 c/be﹝4﹞# +3.3v（i/o） 67 ground par64 68 ad﹝63﹞ ad﹝62﹞ 69 ad﹝61﹞ ground 70 +3.3v（i/o） ad﹝60﹞ 71 ad﹝59﹞ ad﹝58﹞ 72 ad﹝57﹞ ground 73 ground ad﹝56﹞ 74 ad﹝55﹞ ad﹝54﹞ 75 ad﹝53﹞ +3.3v（i/o） 76 ground ad﹝...

  • Page 23

    16 ps4s1~2:4-pin power connector (small-4p ) pin no. Description 1 5v 2 ground 3 ground 4 12v ps8p1:8-pin power connector (xeon-8p male ) pin no. Description pin no. Description 1 ground 5 +12v 2 ground 6 +12v 3 ground 7 +12v 4 ground 8 +12v satab1 : 180º sata connector pin no. Description 1 gnd 2 t...

  • Page 24

    17 pme1:one pme1 connector supports wake-on-lan pin description 1 3vstb 2 pme- 3 gnd lusbcom1 ： box_header_2x20_2.00_dip pin no. Description pin no. Description 1 com_gnd 2 com_gnd 3 ndsr1 4 ndcd1 5 nrts1 6 nrxd1 7 ncts1 8 ntxd1 9 nri1 10 ndtr1 11 gensts- 12 redsts- 13 hdled- 14 hdled+ 15 gnd 16 prl...

  • Page 25

    18 1 12v 2 vcc3 3 12v 4 vcc3 5 12v 6 vcc3 7 relay_c 8 vcc3 9 vcc3aux 10 vcc3 11 vcc 12 vcc 13 wake 14 tck 15 prsnt1 16 smclk 17 trst 18 smdat 19 tdo 20 tdi 21 btx3- 22 tms 23 btx3+ 24 brx3- 25 gnd 26 brx3+ 27 btx2- 28 gnd 29 btx2+ 30 brx2- 31 gnd 32 brx2+ 33 btx1- 34 gnd 35 btx1+ 36 brx1- 37 gnd 38 ...

  • Page 26

    19 55 atx2- 56 arx3+ 57 atx2+ 58 gnd 59 gnd 60 arx2- 61 atx1- 62 arx2+ 63 atx1+ 64 gnd 65 gnd 66 arx1- 67 atx0- 68 arx1+ 69 atx0+ 70 gnd 71 gnd 72 arx0- 73 gnd 74 arx0+ 75 aclk- 76 gnd 77 aclk+ 78 gnd 79 gnd 80 pwrgd usbf1 ： usb port #1 & #2 connector 2x5 pin 2.54mm pin description pin description 1...

  • Page 27: 1.5

    20 1.5 fw-7890 19” 2u rackmount firewall mechanisms this section of the manual describes the mechanical and device nomenclature of fw-7890. 1.5.1 face panel figure 5 – fw-7890 face panel face panel led status and behavior the following table lists and explains the behavior of each led on the fw-7890...

  • Page 28: 1.5.3 Rear View

    21 1.5.3 rear view figure 6 – fw-7890 rear view „ power switch: click the power switch , and the system will be power on. „ power mute switch: when there is a power supply failure, the system will be alarm. Only click the power mute switch and the system will stop to alarm. Faulty or improper use of...

  • Page 29: C H A P T E R  2

    C h a p t e r 2 fw-7890 hardware installation guide 2.1 hardware installation guide - cpu installation if you plug in single cpu in fw-7890, be notes to put in cpu1. - system memory step 1: the dimm slot has a notch, the dimm memory module only fit in one direction. Step 2: align the memory notch to...

  • Page 30

    - installing compact flash card step 1: insert the compact flash card into the slot carefully as shown in the picture. - installing the mini-pci card step 1: insert the pci expansion card into the mini-pci slot at 45 degree. Step 2: push down the pci expansion card and the pci expansion card is clic...

  • Page 31: Chapter 3

    Chapter 3 award bios setup 3.1 bios setup award‘s rom bios provides a built-in setup program that allows users to modify the basic system configuration and settings. The modified data will be stored in a battery-backed cmos ram so that this data will be retained even when the power is turned off. In...

  • Page 32: Getting Help

    Main menu - quit and not save changes into cmos status page setup menu and option page setup menu - exit current page and return to main menu increase the numeric value or make changes decrease the numeric value or make changes general help, only for status page setup menu and option page setup menu...

  • Page 33

    Note that a brief description of each highlighted selection appears at the bottom of the screen. Standard cmos features use this menu for basic system configuration. Advanced bios features use this menu to set the advanced features available on your system. Advanced chipset features use this menu to...

  • Page 34

    3.3 standard cmos features the items in standard cmos setup menu are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Item options description date mont...

  • Page 35

    Master detailed options ide channel 0 slave options are in its sub menu press to enter the sub menu of detailed options ide channel 1 master options are in its sub menu press to enter the sub menu of detailed options ide channel 2 master options are in its sub menu press to enter the sub menu of det...

  • Page 36

    Access mode chs lba large auto choose the access mode for this hard disk cylinder min = 0 max = 65535 set the number of cylinders for this hard disk. Head min = 0 max = 255 set the number of read/write heads precomp min = 0 max = 65535 **** warning: setting a value of 65535 means no hard disk landin...

  • Page 37

    Processors mode supported. Disabled disables cpu hyper threading feature. Quick power on self test : the default setting is “enabled”. This speeds up the power on self test (post) by skipping some items that are normally checked during the full post. If your system is functioning normally, you can c...

  • Page 38

    Agent after boot : keep agent after os boot.Configuration options: enabled / disabled shadow areas : these categories determine whether option roms will be copied to ram, enabled optional shadow is enabled disabled optional shadow is disabled full screen logo show: show full screen logo during bios ...

  • Page 39

    Memory hole at 15m-16m: you can reserve this area of system memory for isa adapter rom. When this area is reserved, it cannot be cached. The user information of peripherals that need to use this area of system memory usually discusses their memory requirements. Delay prior to thermal : the delay pri...

  • Page 40

    On-chip (primary/secondary) pci ide : the intel 82c440bx chipset contains a pci ide interface with support for two ide channels. Select enabled to activate the primary and/or secondary ide interface. Select disabled to deactivate this interface, if you install a primary and/or secondary add-in ide i...

  • Page 41

    Usb mouse support: select enabled if you need to use a usb inferfaced mouse in the operating system superio device : scroll to this item and press to view the following screen: watch dog : enable / disable the watch dog function. By pass function : enable / disable the lan by pass function lpt/lcm c...

  • Page 42

    3.7 power management setup the power management setup allows you to configure you system to most effectively save energy while operating in a manner consistent with your own style of computer use. Acpi function : this item allows you to enable or disable the advanced configuration and power manageme...

  • Page 43

    V/h sync+blank this selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. Blank screen this option only writes blanks to the video buffer. Dpms initial display power management signaling. Suspend type select the suspend ty...

  • Page 44: 3.8   Pnp/pci Configuration

    3.8 pnp/pci configuration this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed the cpu itself uses when communicating with its own special components. This section covers some very t...

  • Page 45: 3.9   Pc Health Status

    3.9 pc health status cpu temperature detect cpu temperature automatically. System temperature detect system temperature automatically. Fan 1 / fan 2 / fan 3 detect fan1 / fan2 speed status automatically . Vcore / +1.5v / +3.3v / +5v / +12v / -12v / -5v / +2.6v / vbat detect system' s voltage status ...

  • Page 46

    3.10 load optimized defaults when you press on this item you get a confirmation dialog box with a message similar to: l o a d o p t i m i z e d d e f a u l t s ( y / n ) ? N 3.11 supervisor/user password setting you can set either supervisor or user password, or both of then. The differences between...

  • Page 47: 3.12   Save and Exit Setup

    3.12 save and exit setup pressing on this item asks for confirmation: save to cmos and exit (y/n)? Y pressing “y” stores the selections made in the menus in cmos – a special section of memory that stays on after you turn your system off. The next time you boot your computer, the bios configures your...

  • Page 48: Power Supply

    Appendix a power supply power supply specification ac input spec : voltage 90 ~ 264 vac full range output specifications output voltage output current min. Output current max. Output current peak regulation load regulation line output ripple & noise max.[p-p] 5v 2 30.00 ± 5% ± 1% 50mv 12v 2 32.00 ± ...

  • Page 49: Watchdog Timer

    Appendix b watchdog timer introduction most systems need to be self-reliant. It's not usually possible to wait for someone to reboot them if there are some component wrong. Some system designs, such as space probes, are simply not accessible to human operators. If the system ever hangs, such systems...

  • Page 50: A P P E N D I X  C

    A p p e n d i x c console redirection console redirection allows you to maintain a system from a remote location by re-directing keyboard input and text output through the serial port. This section will tell you how to use console redirection. 1. Please insert console cable between on fw-7890 and re...

  • Page 51: A P P E N D I X  D

    A p p e n d i x d lcd module and key pad for fw-7890 purpose the purpose of this document is to provide installation information for the lcd module and key pad installed in the fw-7890. Specification overview the lcd module is designed to provide real-time operating status and configuration informat...

  • Page 52

    2.Read_keypad(); =>this function get the keypad number if user pressed key. =>direct write function to your program. Ex. Int a; a=read_keypad(); return value: "1"=>the upper key "2"=>the down key "3"=>the enter key "4"=>the esc key 3.Show_data(int dp_type1,int dp_type2,int dp_type3,int dp_type4, cha...

  • Page 53: A P P E N D I X  E

    A p p e n d i x e lan bypass function introduction the bypass function is used to link (or short) two indepent ehernet ports when the system crash or power off. That means if there are some condition in your system, with lan bypass function, it will not interrupt you network traffic. There are two c...

  • Page 54: Terms and Conditions

    Terms and conditions date:2004.07.08 warranty policy 1. All products are warranted against defects in materials and workmanship for a period of two years from the date of your purchase. 2. The buyer will bear the return freight charges for goods returned for repair within the warranty period; wherea...

  • Page 55: Rma Service Request Form

    Rma service request form when requesting rma service, please fill out this rma service request form. Without this form your rma will be rejected!!! Rma no: reasons to return: □ repair(please include failure details) □ testing purpose company: contact person: phone no. Purchased date: fax no.: applie...

  • Page 56

    Pexnsd01-040709 version 1.0 printed and published in taiwan.