1. DL manuals
  2. Lanner
  3. Firewall
  4. FW-7571
  5. User Manual

Lanner FW-7571 User Manual

Manual is about: Network Security Platform

Summary of FW-7571

  • Page 1

    >> network application platforms hardware platforms for next generation networking infrastructure fw-7571 v0.1 preliminary user's manual publication date:2014-03-12.

  • Page 2: About

    I about about network application platforms overview icon descriptions the icons are used in the manual to serve as an indication of interest topics or important messages. Below is a description of these icons: note: this check mark indicates that there is a note of interest and is something that yo...

  • Page 3: About

    Ii about about network application platforms lithium battery caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions operating safety electrical equipment generates heat. Ambient air temperature may not be adequate to cool equip...

  • Page 4: About

    Iii about about network application platforms sécurité de fonctionnement l’équipement électrique génère de la chaleur. La • température ambiante peut ne pas être adéquate pour refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée. Vérifiez que votre site prop...

  • Page 5: Ttat

    Ttat table of contents beable of contents iv chapter 1: introduction 1 system specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 package contents...

  • Page 6: Introduction

    1 introduction network application platforms chapter 1 chapter 1: introduction thank you for choosing the fw-7571. This system integrates the newest intel® atom processor c2000 series processor, codenamed rangeley, with the intel quickassist technology to provide a robust and high- performance commu...

  • Page 7: Introduction

    2 introduction network application platforms chapter 1 package contents your package contains the following items: fw-7571 network security platform • power cable • 1 console cable • serial-ata hard drive cable • 1 threaded screw set • 1 ear bracket set • drivers and user’s manual cd. • optional acc...

  • Page 8: Introduction

    3 introduction network application platforms chapter 1 front panel features f1 power/status/hdd led power: if the led is on it indicates that the system is powered on. If it is off, it indicates that the system is powered off. Status: this led is programmable. You could program it to display the ope...

  • Page 9: Introduction

    4 introduction network application platforms chapter 1 rear panel features r2 r1 r3 r1 reserved for pcie expansion slot r2 cpu fan this fan has smart fan feature which can be turned on automatically when the temperature exceeds the set threshold. R3 power-on switch it is a switch to turn on or off t...

  • Page 10: Hardware Setup

    5 hardware setup chapter 2 network application platforms chapter 2: hardware setup preparing the hardware installation to access some components and perform certain service procedures, you must perform the following procedures first. Warning: to reduce the risk of personal injury, electric shock, or...

  • Page 11: Hardware Setup

    6 hardware setup chapter 2 network application platforms . 2.5” hdd installation follow these steps to install a hard disk to the fw-7571: place hard disk on the hard disk tray and align the holes 1. Of the hard disk with the mounting holes on the tray. Secure the hard disk with 4 mounting screws on...

  • Page 12: Hardware Setup

    7 hardware setup chapter 2 network application platforms installing the compactflash card fw-7571 provides one compactflash slot. Follow the procedures bellow for installing a compactflash card. Align compactflash card and the card slot with the 1. Arrow pointing toward the connector. The card fits ...

  • Page 13: Motherboard Information

    8 motherboard information network application platforms chapter 3 chapter 3: motherboard information block diagram the block diagram depicts the relationships among the interfaces or modules on the motherboard. Please refer to the following figure for your motherboard’s layout design. 2-8 intel® ato...

  • Page 14: Motherboard Information

    9 motherboard information network application platforms chapter 3 motherboard layout the motherboard layout shows the connectors and jumpers on the board. Refer to the following picture as a reference of the pin assignments and the internal connectors. Sata6g_1 pcie1 sata6g_2 conn2 spirom1 atx1 fan2...

  • Page 15: Motherboard Information

    10 motherboard information network application platforms chapter 3 jumper settings fan connectors(fan2 ): the 5-pin connector is for connecting the cpu fan. It comes with the smart fan feature by which the fan could be monitored and turned on when the temperature exceed the set threshold. Note : fan...

  • Page 16: Motherboard Information

    11 motherboard information network application platforms chapter 3 serial interface connectors(comb1): it is for connecting the rs-232 serial port (com2) interface cable. Lan 1~4: lan connector(rj-45, provided by intel marvell 88e1543) lan 5~6 connector (rj-45, provided by intel ethernet i210at) com...

  • Page 17: Motherboard Information

    12 motherboard information network application platforms chapter 3 4-pin sata power connector (ps4p1, ps4p2) at mode power button connector (conn1) it is for connecting the power switch in at mode reset switch (sw2) and reset button connector (conn2) hardware or software reset jumper (j5): the jumpe...

  • Page 18: Motherboard Information

    13 motherboard information network application platforms chapter 3 digital gpio (gpio1) connector spi-rom update connector (spi-rom1): it is for updating the spi flash soldered on board for service and repair purposes. Lpc i/o bus (it can also be called port 80) (lpc1): it is a proprietary connector...

  • Page 19: Motherboard Information

    14 motherboard information network application platforms chapter 3 case open (open1): case opening detection pin header pin no. Description 1 gnd 2 sio_caseopen# 2 1.

  • Page 20: Bios Settings

    15 bios settings chapter 4 network application platforms chapter 4: bios settings accessing the bios menu when you are installing a motherboard or when the system prompts “run setup” during start-up, you will use the bios setup program to configure the system, . This section explains how to configur...

  • Page 21: Bios Settings

    16 bios settings chapter 4 network application platforms the main menu the main bios setup menu is the first screen that you can navigate. Each main bios setup menu option is described in this chapter. The main bios setup menu screen has two main frames. The left frame displays all the options that ...

  • Page 22: Bios Settings

    17 bios settings chapter 4 network application platforms advanced settings select the advanced tab from the setup screen to enter the advanced bios setup screen. You can select any of the items in the left frame of the screen, such as superio configuration, to go to the sub menu for that item. You c...

  • Page 23: Bios Settings

    18 bios settings chapter 4 network application platforms super io configuration serial port 0/1 configuration item selection serial port enable or disable this serial port device settings shows the serial port base address and irq port parallel port configuration item selection parallel port enable ...

  • Page 24: Bios Settings

    19 bios settings chapter 4 network application platforms pc health status this menu shows the hardware monitor configuration settings. Select an item then press to display the configuration options. Sys/cpu temperature the onboard hardware monitor automatically detects and displays the cpu and mothe...

  • Page 25: Bios Settings

    20 bios settings chapter 4 network application platforms console redirection use this menu to set the settings for bios remote access feature. Item selection console redirection enable or disable bios through remote access console redirection set- tings enter to view more options com0 console redire...

  • Page 26: Bios Settings

    21 bios settings chapter 4 network application platforms lanner generation 2 lan bypass configuration in this screen, you can configure the lan bypass functionality. The system can accommodate one lan module. Lan bypass for ethernet expansion module you can activate or deactivate the lan bypass port...

  • Page 27: Bios Settings

    22 bios settings chapter 4 network application platforms usb configuration setting you can use this screen to select options for the usb configuration. Use the up and down keys to select an item. Use the and keys to change the value of the selected option. The settings are described on the following...

  • Page 28: Bios Settings

    23 bios settings chapter 4 network application platforms usb mass storage driv in this option, you can enable or disable the attached usb drive to be used as the system’s hard drive. Usb hardware delays a the menu sets delay time for usb operations. Item description usb transfer time-out set transfe...

  • Page 29: Bios Settings

    24 bios settings chapter 4 network application platforms intel rcsetup you can use this screen to view the capabilities and of your cpu. You can also use this menu to enable/disable certain functions of your cpu. Use the up and down keys to select an item. Use the and keys to change the value of the...

  • Page 30: Bios Settings

    25 bios settings chapter 4 network application platforms north/south bridge the chipset menu will let you further configure your intel cpu and pch capabilities: smbus controller select to enable or disable the smbus controller. Be cautious that communications or devices that use this controller will...

  • Page 31: Bios Settings

    26 bios settings chapter 4 network application platforms sata controllers configuration settings while entering setup, the bios automatically detects the presence of sata devices. The sata port items show “empty” if no sata device is installed to the corresponding sata port. Sata mode selection the ...

  • Page 32: Bios Settings

    27 bios settings chapter 4 network application platforms security settings select security setup from the setup main bios setup menu. All security setup options, such as password protection and virus protection, are described in this section. To access the sub menu for the following items, select th...

  • Page 33: Bios Settings

    28 bios settings chapter 4 network application platforms boot configuration in this screen, you will be able to configure the boot procedures and the related elements. Items options setup prompt timeout specify the number of seconds for the boot setup prompt to wait for user’s intervention during th...

  • Page 34: Bios Settings

    29 bios settings chapter 4 network application platforms save & exit save and exit select the exit tab from the setup screen to enter the exit bios setup screen. You can display an exit bios setup option by highlighting it using the keys. The following table lists the options in this menu. Item opti...

  • Page 35: Bios Settings

    30 bios settings chapter 4 network application platforms item options boot override this section of the boot menu allows booting from a specific device immediately. Therefore you should see an entry for all bootable devices. Launch efi shell from filesystem device this option allows you to attempt t...

  • Page 36: Programming Watchdog Timer

    31 programming watchdog timer network application platforms appendix a appendix a: programming watchdog timer a watchdog timer is a piece of hardware that can be used to automatically detect system anomalies and reset the processor in case there are any problems. Generally speaking, a watchdog timer...

  • Page 37: Programming Lan Bypass

    32 programming lan bypass appendix b network application platforms appendix b: programming generation 3 lan bypass lanner generation 3 bypass the bypass function is used to link two independent ethernet ports when the system crashes or powers off. This means if your system is equipped with a lan byp...

  • Page 38: Appendix C

    33 setting up console redirection appendix c network application platforms appendix c: setting up console redirections console redirection lets you monitor and configure a system from a remote terminal computer by re-directing keyboard input and text output through the serial port. This following st...

  • Page 39: Programming The Lcm

    34 programming the lcm appendix d network application platforms appendix d: programming the lcm the lcd panel module (lcm) is designed to provide real- time operating status and configuration information for the system. For sample lcm code, see lcm foler in the driver and manual cd. The driver and t...

  • Page 40: Appendix E

    35 appendix e network application platforms intel® quickassist technology appendix e: installing intel quickassist software for linux the fw-7573 platform incorporates intel quickassist technology, which includes acceleration modules that are accessed via intel quickassist software. The intel quicka...

  • Page 41: Terms and  Conditions

    36 terms and conditions appendix f embedded and industrial computing appendix f: terms and conditions warranty policy all products are under warranty against defects in 1. Materials and workmanship for a period of one year from the date of purchase. The buyer will bear the return freight charges for...

  • Page 42: Terms and  Conditions

    37 terms and conditions appendix f embedded and industrial computing rma service request form when requesting rma service, please fill out the following form. Without this form enclosed, your rma cannot be processed. Rma no: reasons to return: Ŀ repair(please include failure details) Ŀ testing purpo...