- DL manuals
- Lanner
- Desktop
- LEC-6021A
- User Manual
Lanner LEC-6021A User Manual
Summary of LEC-6021A
Page 1
Version: 1.3 date of release: 2017/06/13 lec-6021a user manual industrial communications.
Page 2: Icon Descriptions
Chapter one: introduction 2 icon descriptions the icons are used in the manual to serve as an indication of interest topics or important messages. Below is a description of these icons: note: this check mark indicates that there is a note of interest and is something that you should pay special atte...
Page 3: Safety Guidelines
Lec-6021a user manual 3 compliances and certification ce certification this product has passed the ce test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by esd (el...
Page 4
Chapter one: introduction 4 operating safety electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment to acceptable operating temperatures without adequate circulation. Be sure that the room in which you choose to operate your system has adequate air circula...
Page 5: Revision History
Lec-6021a user manual 5 revision history version date (yyyy/mm/dd) description 0.1 2014/12/26 preliminary 1.0 2015/05/26 official release 1.1 2016/04/19 updated motherboard added gnd and reset button on side panels modified installation images 1.2 2017/04/07 update operating temperature 1.3 2017/06/...
Page 6: Table Of Contents
Chapter one: introduction 6 table of contents package contents 7 system specifications 8 system drawing 9 block diagram 10 front components 11 side components 12 rear components 13 connectors & jumpers locations 14 connectors and jumpers list 15 jumper settings 16 connector pinouts 17 preparing the ...
Page 7: Package Contents
Lec-6021a user manual 7 thank you for choosing lanner lec-6021a rugged industrial system. This box pc is an industrial cyber security appliance featuring esd-protected serial communication and lan ports. Lec-6012a is compliant with iec 61850-3 for power substation automation and suitable for harsh e...
Page 8: System Specifications
Chapter one: introduction 8 system specifications processor options intel® atom™ n2600 1.6 ghz chipset intel nm10 bios ami spi flash rom system memory sockets 1 x 204-pin ddr3 sodimm socket max. Capacity 2 gb usb usb 2.0 compliant hosts x 2, type a connector operating system support linux 2.6, windo...
Page 9: System Drawing
Lec-6021a user manual 9 system drawing mechanical dimensions of lec-6021a unit: mm.
Page 10: Block Diagram
Chapter two: system components 10 block diagram the block diagram depicts the relationships among the interfaces and modules on the motherboard..
Page 11: Front Components
Lec-6021a user manual 11 front components component description f1 serial ports com serial ports com with rs-232 the upper one is tx (data transmitting in yellow), and the lower one is rx (data receiving in yellow) for serial port status. F2 two sfp ports the two fiber ports are enabled by intel i21...
Page 12: Side Components
Chapter two: system components 12 side components component description s1 dc-in (power) 1x6 pin phoenix contact connector with power failure relay dual 18~48vdc power input through 6xpin phoenix contact connector power failure relay is supplied. S2 reset reset button.
Page 13: Rear Components
Lec-6021a user manual 13 rear components as the rear panel is dedicated for din rail installation, there are no i/o components on it..
Page 14
Chapter three: motherboard information 14 connectors & jumpers locations the following picture highlights the location of system jumper settings and connectors of the mainboard. Please refer to connectors and jumpers list for more details. Cn2 (2x usb ports).
Page 15: Connectors and Jumpers List
Lec-6021a user manual 15 connectors and jumpers list the table below lists the function of each of the board jumpers and connectors by labels shown in the above section. The next section in this chapter gives pin definitions and instructions on setting jumpers. List of connectors on mainboard: label...
Page 16: Jumper Settings
Jumper settings pwr1: power button connector in 2-pin male pin header rst2: reset button rst1: hw/sw reset select clr1: clear cmos via 2-pin male pin header pin description short pin1-2 power on/off system nc (non-connected, default) normal pin description short pin1-2 software reset short pin 2-3 (...
Page 17: Connector Pinouts
Chapter three: motherboard information 17 connector pinouts vga1: vga connector com1: serial port 1 pin header connector kbms1: keyboard & mouse connector pin description pin description 1 con_red 2 crt_on 3 con_green 4 gnd_vga 5 con_blue 6 gnd_vga 7 con_hsync 8 gnd_vga 9 con_vsync 10 gnd_vga 11 con...
Page 18
Lec-6021a user manual 18 con1: sata power connector sata1: sata signal connector cn2: double-stacked usb connectors rj2 connector: double-stacked rj-45 lan ports pin description pin description 1 nc 2 gnd 3 gnd 4 p5vs pin description pin description 1 gnd 2 sata_tx1_c_dp 3 sata_tx1_c_dn 4 gnd 5 sata...
Page 19
Chapter three: motherboard information 19 rj1 connector: double-stacked rj-45 lan ports with lan bypass sfp1,sfp2 connectors rj3 connector: rj45 lan port w/transformer 10/100/1000 base-t w/o led pin description pin description a1 mdi0+_3 b1 mdi0+_4 a2 mdi0-_3 b2 mdi0-_4 a3 mdi1+_3 b3 mdi1+_4 a4 mdi1...
Page 20
Lec-6021a user manual 20 preparing the hardware installation warning: to reduce the risk of personal injury, electric shock, or damage to the equipment, please make sure the device is totally powered off and without any power source connected. 1. Turn the device around (facing the rear panel) and th...
Page 21
Chapter 4: hardware setup 21 installing the system memory the motherboard comes with one ddr3 so-dimm socket. Please follow the steps below for installation. 1. Align the memory module’s key with the so-dimm socket’s key. 2. Install the so-dimm until firmly seated. 3. Place the heat sink onto the me...
Page 22
Lec-6021a user manual 22 installing a compactflash card the system provides one compactflash slot. Follow the procedures below to install a compactflash card. 1. Align compactflash and the card slot. 2. Insert the compactflash into the connector until firmly seated. Note: the device has an error pro...
Page 23: Installing Heat-Sinks
Chapter 4: hardware setup 23 installing heat-sinks the system comes with heat sink thermal solutions on the internal side of the top compartment. 1. Install the heat sinks onto the circled areas. 2. The heat sinks are provided as thermal solutions for sfp fiber i/o connectors, super i/o chip, cf and...
Page 24: Connecting Power
Lec-6021a user manual 24 connecting power connect the device to an 18~48 vdc power source. The power source comes from the ac/dc adapter through a phoenix contact. This power socket is specially designed to guard against fault in power contact, i.E., the reverse of the electrical polarity will not d...
Page 25: Din Rail Mounting
Chapter 4: hardware setup 25 din rail mounting the system can be mounted via din rail method with included din rail kit. 1. Attach the din rail kit to the rear of the system with 3 screws. 2. Hang the system onto a rail. Aim the hook of the kit into the din rail until it is totally fixed. Note: afte...
Page 26: Wall-Mounting
Lec-6021a user manual 26 wall-mounting the system can be mounted via the provided wall mounting brackets and screws. 1. If the din rail kit is already mounted on rear panel, remove it. 2. On both side panels of the unit, attach the brackets using the provided screws. Please note that there are two t...
Page 27
Appendix a: programming watchdog timer 27 a watchdog timer is a piece of hardware that can be used to automatically detect system anomalies and reset the processor in case there are any problems. Generally speaking, a watchdog timer is based on a counter that counts down from an initial value to zer...
Page 28: Warranty Policy
Lec-6021a user manual 28 warranty policy 1. All products are under warranty against defects in materials and workmanship for a period of one year from the date of purchase. 2. The buyer will bear the return freight charges for goods returned for repair within the warranty period; whereas the manufac...
Page 29
Appendix b: terms and conditions 29.