Lanner LEC-7230 User manual - Front Components
Component
Description
F1 Reset
Reset switch
F2 MIC IN/LINE OUT
Connect the audio devices to these ports. The
Microphone and line out port are provided by
Realtek ALC
886-GR.
F3 USB 3.0 Port
An USB 3.0 type A connector.
F4 Four USB 2.0 Ports
Double-stacked USB 2.0 type A connectors
Two additional USB 2.0 ports by LEK-IOA11. add-
on board
F5 Two 10/100/1000Mbps LAN ports
Two RJ-45 (network) jacks with LED indicators are
as described below.
LINK/ACT (Yellow)
•
On/Flashing: The port is linking and active in
data transmission.
•
Off: The port is not linking.
SPEED (Green/Yellow)
•
Yellow: The connection speed is 1000Mbps.
•
Green: The connection speed is 100Mbps
•
Off: The connection speed is 10Mbps.
F6 HDD (Yellow)
3G Status (Green) and
Power LED (Green)
HDD
•
Blinking: data access activities
•
Off: no data access activities
3G Status
•
Blinking: 3G transmission activities
•
On: 3G expansion card exists
•
Off: no 3G expansion card present
Power
•
On: The computer is on.
•
Off: The computer is off .
F7 Power-on Switch
A power-on switch through the Phoenix
contact for distant power-on/off control
F8 Power Button with dual LED
ATX Power-on button with LEDs: Standby
mode in Red; Power-on mode in Green
Front Components
sPEEd
LINK/ACT
F3
F1
F2
F5
F6
F4
F7
F8