1. DL manuals
  2. LANSCHE AUDIO
  3. Speakers
  4. 5.1
  5. Operating Instructions Manual

LANSCHE AUDIO 5.1 Operating Instructions Manual

Summary of 5.1

  • Page 1

    L a n s c h e a u d i o ● w a l l h a u s e r s t r . 1 2 ● 7 8 4 6 5 - k o n s t a n z ● g e r m a n y ● w w w . L a n s c h e - a u d i o . C o m lansche audio operating instruction loudspeaker no.3.

  • Page 2

    Lansche audio operating instructions no.3 page 1 / 14 operating instructions no.3 1. Unpacking the speakers 3 2. Operating and connecting components 4 2.1. Overview 4 2.2. Positioning the speakers 5 2.2.1 acoustic alignment of the speakers 5 2.2.2. Distance between the speakers 5-6 2.2.3. Spikes/con...

  • Page 3

    Lansche audio operating instructions no.3 page 2 / 14 dear connoisseur of great sound! We sincerely appreciate the trust you have extended to us in purchasing this lansche product, and we would like to congratulate you on your fine selection. In choosing this high-quality speaker system, you have pr...

  • Page 4

    Lansche audio operating instructions no.3 page 3 / 14 1. Unpacking the speakers please exercise care when unpacking lansche audio speakers and accessories. Because of their weight and size, we strongly recommend using the assistance of another person. This will help to avoid damage to the devices or...

  • Page 5

    Lansche audio operating instructions no.3 page 4 / 14 2. Operating and connecting components 2.1. Overview 1 plexiglas cover 2 main power on/off switch 4 bass reflex port 7 logo (front) 6 speaker connection plus (red) 3 c ooling „corona“ (2x) 9 serial number & technical sign (bottom) 5 speaker conne...

  • Page 6

    Lansche audio operating instructions no.3 page 5 / 14 2.2. Positioning the speakers note: the following instructions are intended as guidelines to help you position the speakers in a suitable way. 2.2.1 acoustic alignment of the speakers lansche no.3 speakers should be placed at least 20 cm from the...

  • Page 7

    Lansche audio operating instructions no.3 page 6 / 14 if the speakers are too close, the stereo effect is hampered; if they are too far apart, sound is mainly perceived as coming from either right or left, with an acoustic „gap‟ in the center. It can be helpful to playback a recording whose spatial ...

  • Page 8

    Lansche audio operating instructions no.3 page 7 / 14 when connecting speaker cables, it is absolutely necessary to check for proper polarity: plus to plus and minus to minus. The screw clamps on the loudspeakers as well as the connectors on the amplifier are colour coded and labelled (positive pole...

  • Page 9

    Lansche audio operating instructions no.3 page 8 / 14 3. Corona plasma tweeters 3.1. Information about corona plasma tweeters a. The corona plasma tweeter emits a bright light (plasma ball) during the start up operation. As with any bright light source avoid looking directly at it from a short dista...

  • Page 10

    Lansche audio operating instructions no.3 page 9 / 14 tips on using the no.3 the corona plasma tweeter is able to reproduce the most finest of details which other tweeters such as: diamond, beryllium, electrostatic and ribbon etc. Cannot. The following points should be observed: a. When playing sacd...

  • Page 11

    Lansche audio operating instructions no.3 page 10 / 14 note: please be aware the corona plasma tweeter operates at 100% power even when no music is being played. It is therefore recommended that when you are not listening to music you turn off the tweeter power by the power switch (2) located near t...

  • Page 12

    Lansche audio operating instructions no.3 page 11 / 14 d. Turn the brush clockwise and anticlockwise 5 rotations. You do not have to put much pressure on the brush to clean. E. Remove the brush and blow out the loose deposits on and around the electrode. F. Manipulate the cleaning brush bristles by ...

  • Page 13

    Lansche audio operating instructions no.3 page 12 / 14 4. Miscellaneous instructions 4.1. Warm-up phase to develop its maximum potential output, the speaker requires a warm-up period of about 15–20 operating hours after being transported. During this time, the properties of all mechanical parts shif...

  • Page 14

    Lansche audio operating instructions no.3 page 13 / 14 6. General notes on safety 1) - safety and operating instructions please read all safety and operating instructions carefully before operating the device. Never open the housing. If any damage occurs, please contact an authorized lansche audio d...

  • Page 15

    Lansche audio operating instructions no.3 page 14 / 14 do not apply excessive force on the spikes when positioning the speakers, as this could cause them to be torn off from the bottom plate (9). When lifting the speakers, make sure not to injure yourself on the spikes. When you transport your speak...