Lanta Fireball Par64 Tr Owner's Handbook Manual - page 5
© Lanta Lighting™ 2010. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
Revision 1
Owner Handbook Fireball Par64 Tri™
Colour Intensity (Pr.01 Only)
In this sub-mode the individual intensity of Red, Green & Blue channels can be set. With
the LED Display reading “Pr.01”, press “SETUP” twice until “rxxx” “Gxxx” or “bxxx” is shown.
The “UP” and “DOWN” buttons step between available values of “0” and “255”. Not all
intensities can be set for every option. Valid combinations are;
LED Display Initially Shows
Red Values
Green Values
Blue Values
1--h
0 to 255
Not Applicable
Not Applicable
2-hG
0 to 255
0 to 255
Not Applicable
3--G
Not Applicable
0 to 255
Not Applicable
4-G6
Not Applicable
0 to 255
0 to 255
5--6
Not Applicable
Not Applicable
0 to 255
6-h6
0 to 255
Not Applicable
0 to 255
7hG6
0 to 255
0 to 255
0 to 255
8OOF
Not Applicable
Not Applicable
Not Applicable
All other Effects (Pr.02 to Pr.07)
Speed and Flash settings can be individually tailored for some sub-modes. Ensure that
the LED Display reads between “Pr.01” and “Pr.07”.
Speed Setting
Pressing “SETUP” changes the LED display to “SPFL” (for speed). Speed can be set with the
“UP” and “DOWN” buttons between “SP01” (slowest) and “SP99” (fastest).
Flash Frequency
A second press of the “SETUP” button changes the LED display to “FS00” (for flash
frequency). Speed can be set with the “UP” and “DOWN” buttons between “FS01” (approx
0.5Hz) and “FS99” (approx 40Hz).