Lanta Orion Aspect Owner's Manual - Operating Modes
© Lanta Lighting™ 2010. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
Revision 1.0
Owner Handbook Orion Aspect™
Operating Modes
Distinct operating modes are supported by the unit. To select, use the “MENU” button to
enter the menu. The “ENTER” button selects specific settings for each operating mode
with the “UP” and “DOWN” buttons choosing between the values available.
Entering On-board Program Mode
Power down the unit for at least 30 seconds. Disconnect any DMX control cables. When
power is applied to the unit again, On-board Program mode will automatically be
entered.
Entering DMX Mode
Power down the unit for at least 30 seconds. Connect a DMX control cable. When power
is applied to the unit again, DMX mode will automatically be entered.
Entering Test Mode
Select “Auto Test” on the LCD display. Press “ENTER” and the unit will step sequentially
through Red, Green, Blue and White colour displays on all LEDs until stopped by the user.
Entering Slave Mode
Power down the unit for at least 30 seconds. Connect a DMX control cable. When power
is applied to the unit again, use the “MENU” button to select “SLAVE” on the LCD display.
Entering Static Colour Mode
Select “Show Mode” on the LCD display. Press “ENTER”. Once show mode is selected use
the “UP/DOWN” buttons to select “COLOUR” then Press “ENTER”. (7 Static colours can be
selected.)