Lantech CM-011 User Manual - Technical Specification
14
Technical Specification
Fast Fiber Converter Module technical specification is as following:
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back pressure
Connector
Fiber: Duplex ST/SC/MT-RJ, VF-45, Simplex SC
(WDM single mode)
RJ-45 Socket:
CAT-3/5 (10/100Mbps) Twisted Pair
cable Auto MDI/MDI-X and Auto-Negotiation
Function Support
Switch
architecture
Store and Forward
Fiber parameters
Fiber Core:
Multi-Mode (62.5/125um, 50/125um)
Single-Mode (9/125μm)
Wavelength:
1310nm(Multi-mode)
1310nm(Single-mode)
1550nm(WDM, TX), 1310nm(WDM,
RX)
Fiber Distance:
Multi-Mode Fiber 2KM
Single-Mode Fiber (30 KM)
WDM (Single-Mode) 20KM
Transparent
packet
64 to 1518 Bytes for Non-VLAN Ethernet packet
Link Lost
Forward
UTPÎFiber: If UTP port link down, then converter
will forced fiber to link down.
Fiber Î UTP: If Fiber port link down, the media
converter will force UTP port to link down.
[Multi-Mode] power budget : Min: 9dB , MAX: 19dB.
[Single-Mode] power budget : Min: 19dB , MAX: 26dB.