Lantech GE-800 User Manual

Manual is about: 8 Port 10/100/1000 Base-TX Gigabit Copper Switch

Summary of GE-800

  • Page 1

    Ge-800 gigabit copper switch user guide user guide ge-800 8 port 10/100/1000 base-tx gigabit copper switch rev. 2.0 jan, 2004.

  • Page 2

    User guide 1 1. Introduction in the modern business society, communication and sharing information is essential. Computer networks have proven to be one of the fastest methods of communication… gigabit ethernet over copper technology is a cost effective way for network equipments to be upgraded from...

  • Page 3

    Ge-800 gigabit copper switch user guide •package contents - ge-800,gigabit copper switch - dc power adapter - four rubber feet - user’s guide - ge-800,gigabit copper switch - rubber feet - dc power adapter - user’s guide figure 1-2. Package contents compare the contents of your ge-800 gigabit copper...

  • Page 4

    Ge-800 gigabit copper switch user guide 3 •ethernet switching technology ethernet switching technology dramatically boosted the total bandwidth of a network, eliminated congestion problems inherent with carrier sense multiple access with collision detection ( csma/cd ) protocol, and greatly reduced ...

  • Page 5

    Ge-800 gigabit copper switch user guide 4 2. Hardware description this section mainly describes the hardware of lantech ge-800 gigabit copper switch. This switch is an auto-negotiation 10/100/1000mbps ethernet rj-45 connectors. The physical dimensions of the ge-800 as follow 165 x 100 x 32.5 mm (l x...

  • Page 6

    Ge-800 gigabit copper switch user guide •led indicators the led indicators gives a real-time indication of system operating statuses. There are four led-indicators (100/1000, lnk/act, fd/col) for each gigabit port and one power led for unit. The following table provides descriptions of leds status a...

  • Page 7: Desktop Installation

    Ge-800 gigabit copper switch user guide 3.Installation this section shows the installation procedures of the switch. Desktop installation set the switch on a suffi ciently large fl at space with a power outlet nearby. The surface where you put your switch should be clean, smooth, level, and sturdy. ...

  • Page 8: Backbone Switch

    Ge-800 gigabit copper switch user guide 4.Network application this section provides you one sample of network topology in which the ge-800 gigabit copper switch is used. In general, the ge-800 gigabit copper switch is designed to be used as a high-bandwidth backbone switch. You can use the ge-800 gi...

  • Page 9

    Ge-800 gigabit copper switch user guide 5. Technical specifications 8 this section provides the specifi cations of lantech ge-800 gigabit copper switch, and the following table lists them: standards compliance ieee 802.3u 100base-tx fast ethernet ieee 802.3ab 1000base-t gigabit ethernet ieee 802.3x ...

  • Page 10

    3f, no.8, lane 345, yang-kuang st., nei-hu dis., 114, taipei, taiwan, r.O.C. Tel: +886-2-2659-1800 fax: +886-2-2659-1801 e-mail: service@lantech.Com.Tw http://www.Lantech.Com.Tw.