1. DL manuals
  2. Lantech
  3. Wireless Router
  4. HR-114 II
  5. User Manual

Lantech HR-114 II User Manual

Manual is about: High Speed Internet Broadband Router

Summary of HR-114 II

  • Page 1

    34 user guide hr-114 ii high speed internet broadband router rev. 1.0 august, 2003.

  • Page 2: Fcc Warning

    User guide 1 fcc warning this equipment has been tested and found to comply with the regulations for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial ...

  • Page 3: Table of Content

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 2 user guide 3 table of content 1. About this guide.......................................................................3 purpose...................................................................................3 overvi...

  • Page 4: Purpose :

    2 user guide 3 1. About this guide congratulations on your purchase of this 4-port broadband router. This device integrates 100mbps fast ethernet and 10mbps ethernet network capabilities in a highly fl exible desktop package. It provides a complete solution for internet surfi ng and offi ce resource...

  • Page 5: Applications:

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 4 user guide 5 the scarcity of ip addresses and using a shared internet connection through an internet sharing device can solve high network access costs. All linked computers can make full use of broadband capabilities ov...

  • Page 6: Unpacking:

    4 user guide 5 3. Unpacking and setup this chapter provides unpacking and setup information for the broadband router. Unpacking: open the box of the broadband router and carefully unpack it. The box should contain the following items: . One 4-port high speed broadband router . One external power ada...

  • Page 7: Front Panel :

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 6 user guide 7 4. Hardware installation front panel : the fi gure below shows the front panel of the broadband router. 4-port 10/100mbps ethernet broadband router front panel • power – this indicator lights green when the ...

  • Page 8: Hardware Connections :

    6 user guide 7 • wan – in the four port broadband router, there is an rj-45 10/100mbps auto-mdix port for the wan that will fi t the xdsl/cable modem’s specifi cation need. • lan (1-4) – four rj-45 10/100mbps auto-mdix ports for connecting to either 10mbps or 100mbps ethernet connections. • reset – ...

  • Page 9: Check The Installation :

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 8 user guide 9 check the installation : the control leds of the internet broadband router are clearly visible and the status of the network link can be seen instantly: 1. With the power source on, once the device is connec...

  • Page 10: Windows 2000 :

    8 user guide 9 5. Select “disable dns” in the “dns” fi eld. 6. Select “none” for the “gateway address” fi eld. Windows 2000 : double click on the “my computer” icon on the desktop. When “my computer” window opens, open the “control panel” and then open the “ network dialup connection” applet. Double...

  • Page 11: Windows Nt4.0 :

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 10 user guide 11 1. In the “local area network status” window, click on “properties.” 2. In the “local area network connection” window, fi rst select tcp/ip setting and then select “properties.” 3. Set both “ip address” an...

  • Page 12: Windows Xp :

    10 user guide 11 windows xp : point the cursor and click the right button on the “my network place” icon. Select “properties” to enter the tcp/ip setting window. 1. Set “ip address” to “obtain an ip address automatically.” 2. Set “dns” to “obtain dns server address automatically.”.

  • Page 13

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 12 user guide 13 6. Internet broadband router configuration first make sure that the network connections are functioning normally. This internet broadband router can be confi gured using internet explorer 4.0 or newer web ...

  • Page 14: Quick Setup :

    12 user guide 13 choices for setting, quick setup or advanced setup, it is recommended that the beginner to use the quick setup, it will lead you step by step to confi gure the broadband router. Quick setup : in the main web page, select “quick setup” to specify the time zone and the wan connection ...

  • Page 15

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 14 user guide 15 dial-up xdsl (pppoe) to process. 1-2-1 cable modem (dhcp) : to connect a cable modem with the broadband router, check the cable modem with the related user’s guide, then the cable modem will automatically ...

  • Page 16

    14 user guide 15 1-2-3 pppoe (dial-up xdsl) :if connected to the internet using a pppoe (dial-up xdsl) modem, the isp will provide a password and user name, then the isp uses pppoe. Choose this option and enter the required information, if the isp provided a service name, enter it in the column of t...

  • Page 17

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 16 user guide 17 user’s need to save the cost of connection fee from isp provider (default time=0, always connect). Click on the connect-on-demand button to dial up to the isp when only on demand, while there is a need of ...

  • Page 18

    16 user guide 17 1-3 dns : the domain name system (dns) is the way that internet domain names are located and translated into internet protocol (ip) addresses. If your isp provided at least one dns server ip address, type that ip address in the primary dns address fi elds. You can type up to another...

  • Page 19: Advance Setup :

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 18 user guide 19 advance setup : the broadband router supports advanced functions like system setting wan setting, lan setting, nat setting and firewall setting. 2-1 system this page includes all the basic confi guration t...

  • Page 20

    18 user guide 19 . Remote management from internet – to manage the broadband router from a remote location (outside of the local network through wan port), it must specify the ip address of the remote pc, otherwise, leave the ip address 0.0.0.0, means all legal ip address can access the device. 2-1-...

  • Page 21

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 20 user guide 21 while updating the fi rmware, please wait after pressing the apply button, and follow the instruction on the screen, the system light on the front panel will start blinking when the fi rmware upgraded succ...

  • Page 22

    20 user guide 21 2-1-6 system log : view any attempts that have been made to gain access to the network..

  • Page 23

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 22 user guide 23 2-1-7 reset : in the event that the broadband router stops responding correctly or in some way stops functioning, perform the reset function. The settings will not be changed. To perform the reset, click o...

  • Page 24

    22 user guide 23 2-2-2 static ip : if the service provider has assigned a fi xed ip address, enter the assigned ip address subnet mask and gateway address provided. Click “yes” if using two or more ip addresses. 2-2-3 dial-up xdsl (pppoe) : if connected to the internet using a dial-up xdsl (pppoe) m...

  • Page 25

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 24 user guide 25 2-2-4 pptp : if connected to the internet using a (pptp) xdsl modem, enter the pptp account name, pptp password, host name, service ip address, your ip address, your subnet mask required by your isp in the...

  • Page 26

    24 user guide 25 2-2-5 dns : the domain name system (dns) is the way that internet domain names are located and translated into internet protocol (ip) addresses. If your isp provided at least one dns server ip address, type that ip address in the primary dns address fi elds. You can type up to anoth...

  • Page 27

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 26 user guide 27 from ip pool starting address to ip pool ending address, also, you can change the ip pool range value. The lease time is the amount of time a network user will be allowed connection to the router with thei...

  • Page 28

    26 user guide 27 others. These applications cannot work when network address translation (nat) is enabled. When users send this type of request to your network via the internet, the router will forward those requests to the appropriate pc. If you need to run applications that require multiple connec...

  • Page 29

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 28 user guide 29 example: id trigger port trigger type public port public type comment 1 28800 udp 2300-2400, 47624 udp msn game zone 2 28800 udp 2300-2400, 47624 tcp msn game zone 3 6112 udp 6112 udp battle.Net 2-4-2 virt...

  • Page 30

    28 user guide 29 port mapping rules such as the web or ftp at the local site via public ip addresses can be automatically redirected to local servers confi gured with private ip addresses. In other words, depending on the requested service (tcp/udp port number), the broadband router redirects the ex...

  • Page 31

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 30 user guide 31 the broadband router provides packet fi ltering rules by restricting service ports, ip address or mac address. However, for applications that require unrestricted access to the internet, confi gure a speci...

  • Page 32

    30 user guide 31 2-5-3 mac control : you can block certain client pcs accessing the internet based on mac addresses. 2-5-4 dmz (demilitarized zone) : if a local client pc cannot run an internet application properly from behind the nat fi rewall, open the client up to unrestricted two-way internet ac...

  • Page 33

    Hr-114 ii 1 wan 4 lan broadband router hr-114 ii 1 wan 4 lan broadband router 32 user guide 33 7. Technical specifications general standards ieee 802.3 10base-t ethernet ieee 802.3u 100base-tx fast ethernet ansi/ieee 802.3 auto-negotiation protocol csma/cd data transfer rate ethernet: 10mbps (half d...

  • Page 34

    3f, no.8, lane 345, yang-kuang st., nei-hu dis., 114, taipei, taiwan, r.O.C. Tel: +886-2-2659-1800 fax: +886-2-2659-1801 e-mail: service@mail.Lantech.Com.Tw http://www.Lantech.Com.Tw.