Lantech mini Switch 800 User Manual - page 4
mini Switch 800
User Guide
2. Hardware Description
This section mainly describes the hardware of the Lantech Mini Switch 800
The physical dimensions of the 8-Port Switch is:
165mm(W) X 86mm(D) x 23mm(H)
•Front Panel
The LED indicators are located on the frond panel of the Switch. They
provide a real-time indication of systematic operation status. The Front
Panels 8-Port Switch is displayed in the following fi gures.
Figure 2-1.
The Front Panel of Mini Switch 800
•LED Indicators
The following table provides descriptions of the LED statuses and their
meaning.
LED
Status Color
Description
Power
On
Green The power of the Switch is On
LNK/ACT
On
Green
The port is successfully connecting with the device.
Blinks
The port is receiving or transmitting data.
Off
No device attached.
FDX/COL
On
Green
The port is operating in Full-duplex mode.
Blinks
Collision of Packets occurs in the port.
Off
Half-duplex mode.
100
On
Green
In 100Mbps mode
Off
In 10Mbps mode
LED Indicators
Power LED
3