Palm switch 500 user guide palm switch 500 5 port 10/100 base-tx switch with auto mdi/mdi-x rev. 1.0 june, 2003.
User guide 1. Introduction welcome to the world of mini-networking. In the modern business society, communication and sharing information is crucial. Computer networks have proven to be one of the fastest modes of communication. Lantech palm switch 500 is compacts and attractively designed for deskt...
Palm switch 500 user guide •package contents - palm switch 500 (5 port switch) - rubber feet - one dc power adapter - user’s guide - 5tp auto mdi/mdi-x switch - rubber feet - dc power adapter - user’s guide figure 1-2. Package contents compare the contents of your palm switch 500 with the standard c...
Palm switch 500 user guide 2. Hardware description this section mainly describes the hardware of the lantech palm switch 500 the physical dimensions of the 5-port switch is: 128mm(w) x 65mm(d) x 23mm(h) •front panel the led indicators are located on the frond panel of the switch. They provide a real...
Palm switch 500 user guide •rear panel the rear panel of the palm switch 500 consists of 5x 10/100 n-way utp switch ports, and one dc power connector. Figure 2-2. The rear panel of the 5-port switch - rj-45 ports: 5x 10/100n-way auto-sensing for 10base-t or 100base-tx connection. - auto mdi/mdi-x: i...
Palm switch 500 user guide 3.Network application this section provides you a few examples of network topology in which the palm switch 500 is used, the switch is design to be used as a desktop or segment switch. The switch automatically learns node address, which are subsequently used to fi lter and...
Palm switch 500 user guide •enlarge your network you can use uplink port of the palm switch 500 to connect with another hub or switch to interconnect each of your small switched workgroup to form a large switched network. You can connect anyone switch port to hub or switch without crossover cable by...
Palm switch 500 user guide 4. Trouble shooting the palm switch 500 can be easily monitored through panel indicators to assist in identifying problems. This section describes common problems you may encounter and where you can fi nd possible solutions. •diagnosing led indicators if link indicator doe...
Palm switch 500 user guide 5.Technical specification this section provides the specifi cations of the palm switch 500 : •specifi cation standards compliance ieee 802.3 10base-t ethernet, ieee 802.3u 100base-tx fast ethernet ansi/ieee standard 802.3 n-way auto-negotiation protocol csma/cd max forward...
Palm switch 500 user guide • federal communications commission (fcc) statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of fcc rules. These limits are designed to pro reasonable protection against harmful interference in a r...
Palm switch 500
3f, no.8, lane 345, yang-kuang st., nei-hu dis., 114, taipei, taiwan, r.O.C. Tel: +886-2-2659-1800 fax: +886-2-2659-1801 e-mail: service@mail.Lantech.Com.Tw http://www.Lantech.Com.Tw.
